B813 Standard Specification for Liquid and Paste Fluxes for Soldering of Copper and Copper Alloy Tube

D235 Standard Specification for Mineral Spirits (Petroleum Spirits) (Hydrocarbon Dry Cleaning Solvent)

D268 Standard Guide for Sampling and Testing Volatile Solvents and Chemical Intermediates for Use in Paint and Related Coatings and Material

D396 Standard Specification for Fuel Oils

D849 Standard Test Method for Copper Strip Corrosion by Industrial Aromatic Hydrocarbons

D910 Standard Specification for Aviation Gasolines

D975 Standard Specification for Diesel Fuel Oils

D1275 Standard Test Method for Corrosive Sulfur in Electrical Insulating Oils

D1655 Standard Specification for Aviation Turbine Fuels

D1662 Standard Test Method for Active Sulfur in Cutting Oils

D1838 Standard Test Method for Copper Strip Corrosion by Liquefied Petroleum (LP) Gases

D2251 Standard Test Method for Metal Corrosion by Halogenated Organic Solvents and Their Admixtures

D2619 Standard Test Method for Hydrolytic Stability of Hydraulic Fluids (Beverage Bottle Method)

D3699 Standard Specification for Kerosine

D3735 Standard Specification for VM&P Naphthas

D4048 Standard Test Method for Detection of Copper Corrosion from Lubricating Grease

D4304 Standard Specification for Mineral Lubricating Oil Used in Steam or Gas Turbines

D4378 Standard Practice for In-Service Monitoring of Mineral Turbine Oils for Steam, Gas, and Combined Cycle Turbines

D4485 Standard Specification for Performance of Active API Service Category Engine Oils

D4814 Standard Specification for Automotive Spark-Ignition Engine Fuel

D5760 Standard Specification for Performance of Manual Transmission Gear Lubricants

D5797 Standard Specification for Fuel Methanol (M70-M85) for Automotive Spark-Ignition Engines

D5798 Standard Specification for Ethanol Fuel Blends for Flexible-Fuel Automotive Spark-Ignition Engines

D5853 Standard Test Method for Pour Point of Crude Oils

D5966 Standard Test Method for Evaluation of Engine Oils for Roller Follower Wear in Light-Duty Diesel Engine

D5967 Standard Test Method for Evaluation of Diesel Engine Oils in T-8 Diesel Engine

D5968 Standard Test Method for Evaluation of Corrosiveness of Diesel Engine Oil at 121°C

D5983 Standard Specification for Methyl Tertiary-Butyl Ether (MTBE) for Downstream Blending for Use in Automotive Spark-Ignition Engine Fuel

D6074 Standard Guide for Characterizing Hydrocarbon Lubricant Base Oils

D6158 Standard Specification for Mineral Hydraulic Oils

D6227 Standard Specification for Unleaded Aviation Gasoline Containing a Non-hydrocarbon Component

D6469 Standard Guide for Microbial Contamination in Fuels and Fuel Systems

D6594 Standard Test Method for Evaluation of Corrosiveness of Diesel Engine Oil at 135°C

D6615 Standard Specification for Jet B Wide-Cut Aviation Turbine Fuel

D6618 Standard Test Method for Evaluation of Engine Oils in Diesel Four-Stroke Cycle Supercharged 1M-PC Single Cylinder Oil Test Engine

D6681 Standard Test Method for Evaluation of Engine Oils in a High Speed, Single-Cylinder Diesel Engine-Caterpillar 1P Test Procedure

D6709 Standard Test Method for Evaluation of Automotive Engine Oils in the Sequence VIII Spark-Ignition Engine (CLR Oil Test Engine)

D6750 Standard Test Methods for Evaluation of Engine Oils in a High-Speed, Single-Cylinder Diesel Engine—1K Procedure (0.4 % Fuel Sulfur) and 1N Procedure (0.04 % Fuel Sulfur)

D6751 Standard Specification for Biodiesel Fuel Blend Stock (B100) for Middle Distillate Fuels

D6813 Standard Guide for Performance Evaluation of Hydraulic Fluids for Piston Pumps

D6838 Standard Test Method for Cummins M11 High Soot Test

D6894 Standard Test Method for Evaluation of Aeration Resistance of Engine Oils in Direct-Injected Turbocharged Automotive Diesel Engine

D6923 Standard Test Method for Evaluation of Engine Oils in a High Speed, Single-Cylinder Diesel Engine—Caterpillar 1R Test Procedure

D6975 Standard Test Method for Cummins M11 EGR Test

D6984 Standard Test Method for Evaluation of Automotive Engine Oils in the Sequence IIIF, Spark-Ignition Engine

D6987/D6987M Standard Test Method for Evaluation of Diesel Engine Oils in T-10 Exhaust Gas Recirculation Diesel Engine

D7095 Standard Test Method for Rapid Determination of Corrosiveness to Copper from Petroleum Products Using a Disposable Copper Foil Strip

D7155 Standard Practice for Evaluating Compatibility of Mixtures of Turbine Lubricating Oils

D7156 Standard Test Method for Evaluation of Diesel Engine Oils in the T-11 Exhaust Gas Recirculation Diesel Engine

D7223 Standard Specification for Aviation Certification Turbine Fuel

D7320 Standard Test Method for Evaluation of Automotive Engine Oils in the Sequence IIIG, Spark-Ignition Engine

D7422 Standard Test Method for Evaluation of Diesel Engine Oils in T-12 Exhaust Gas Recirculation Diesel Engine

D7450 Standard Specification for Performance of Rear Axle Gear Lubricants Intended for API Category GL-5 Service

D7467 Standard Specification for Diesel Fuel Oil, Biodiesel Blend (B6 to B20)

D7468 Standard Test Method for Cummins ISM Test

D7484 Standard Test Method for Evaluation of Automotive Engine Oils for Valve-Train Wear Performance in Cummins ISB Medium-Duty Diesel Engine

D7547 Standard Specification for Hydrocarbon Only Unleaded Aviation Gasoline

D7549 Standard Test Method for Evaluation of Heavy-Duty Engine Oils under High Output Conditions—Caterpillar C13 Test Procedure

D7566 Standard Specification for Aviation Turbine Fuel Containing Synthesized Hydrocarbons

D7583 Standard Test Method for John Deere Coolant Cavitation Test

D7592 Standard Specification for Specification for Grade 94 Unleaded Aviation Gasoline Certification and Test Fuel

D7618 Standard Specification for Ethyl Tertiary-Butyl Ether (ETBE) for Blending with Aviation Spark-Ignition Engine Fuel

D7667 Standard Test Method for Determination of Corrosiveness to Silver by Automotive Spark-Ignition Engine Fuel—Thin Silver Strip Method

D7671 Standard Test Method for Corrosiveness to Silver by Automotive Spark–Ignition Engine Fuel–Silver Strip Method

D7719 Standard Specification for High Octane Unleaded Test Fuel

D7752 Standard Practice for Evaluating Compatibility of Mixtures of Hydraulic Fluids

F715 Standard Test Methods for Coated Fabrics Used for Oil Spill Control and Storage