ASTM D1298 - 12b Standard Test Method for Density, Relative Density, or API Gravity of Crude Petroleum and Liquid Petroleum Products by Hydrometer MethodCiting ASTM Standards
Citation data is made available by participants in CrossRefs Cited-by Linking service. A comprehensive list of citations to this standard are listed here.
B963 Standard Test Methods for Oil Content, Oil-Impregnation Efficiency, and Interconnected Porosity of Sintered Powder Metallurgy (PM) Products Using Archimedes’ Principle D117 Standard Guide for Sampling, Test Methods, and Specifications for Electrical Insulating Oils of Petroleum Origin D287 Standard Test Method for API Gravity of Crude Petroleum and Petroleum Products (Hydrometer Method) D396 Standard Specification for Fuel Oils D483 Standard Test Method for Unsulfonated Residue of Petroleum Plant Spray Oils D910 Standard Specification for Aviation Gasolines D976 Standard Test Method for Calculated Cetane Index of Distillate Fuels D1160 Standard Test Method for Distillation of Petroleum Products at Reduced Pressure D1405/D1405M Standard Test Method for Estimation of Net Heat of Combustion of Aviation Fuels D1655 Standard Specification for Aviation Turbine Fuels D1657 Standard Test Method for Density or Relative Density of Light Hydrocarbons by Pressure Hydrometer D1807 Standard Test Methods for Refractive Index and Specific Optical Dispersion of Electrical Insulating Liquids D1903 Standard Practice for Determining the Coefficient of Thermal Expansion of Electrical Insulating Liquids of Petroleum Origin, and Askarels D2225 Standard Test Methods for Silicone Fluids Used for Electrical Insulation D2226 Standard Classification for Various Types of Petroleum Oils for Rubber Compounding Use D2296 Standard Specification for Continuity of Quality of Electrical Insulating Polybutene Oil for Capacitors D2501 Standard Test Method for Calculation of Viscosity-Gravity Constant (VGC) of Petroleum Oils D2779 Standard Test Method for Estimation of Solubility of Gases in Petroleum Liquids D2880 Standard Specification for Gas Turbine Fuel Oils D2892 Standard Test Method for Distillation of Crude Petroleum (15-Theoretical Plate Column) D3120 Standard Test Method for Trace Quantities of Sulfur in Light Liquid Petroleum Hydrocarbons by Oxidative Microcoulometry D3227 Standard Test Method for (Thiol Mercaptan) Sulfur in Gasoline, Kerosine, Aviation Turbine, and Distillate Fuels (Potentiometric Method) D3288/D3288M Standard Test Methods for Magnet-Wire Enamels D3338/D3338M Standard Test Method for Estimation of Net Heat of Combustion of Aviation Fuels D3343 Standard Test Method for Estimation of Hydrogen Content of Aviation Fuels D3487 Standard Specification for Mineral Insulating Oil Used in Electrical Apparatus D3809 Standard Test Methods for Synthetic Dielectric Fluids For Capacitors D3827 Standard Test Method for Estimation of Solubility of Gases in Petroleum and Other Organic Liquids D4052 Standard Test Method for Density, Relative Density, and API Gravity of Liquids by Digital Density Meter D4056 Standard Test Method for Estimation of Solubility of Water in Hydrocarbon and Aliphatic Ester Lubricants D4529 Standard Test Method for Estimation of Net Heat of Combustion of Aviation Fuels D4552/D4552M Standard Practice for Classifying Hot-Mix Recycling Agents D4629 Standard Test Method for Trace Nitrogen in Liquid Petroleum Hydrocarbons by Syringe/Inlet Oxidative Combustion and Chemiluminescence Detection D4652 Standard Specification for Silicone Fluid Used for Electrical Insulation D4737 Standard Test Method for Calculated Cetane Index by Four Variable Equation D4790 Standard Terminology of Aromatic Hydrocarbons and Related Chemicals D4800 Standard Guide for Classifying and Specifying Adhesives D4806 Standard Specification for Denatured Fuel Ethanol for Blending with Gasolines for Use as Automotive Spark-Ignition Engine Fuel D4814 Standard Specification for Automotive Spark-Ignition Engine Fuel D4815 Standard Test Method for Determination of MTBE, ETBE, TAME, DIPE, tertiary-Amyl Alcohol and C1 to C4 Alcohols in Gasoline by Gas Chromatography D4868 Standard Test Method for Estimation of Net and Gross Heat of Combustion of Burner and Diesel Fuels D5222 Standard Specification for High Fire-Point Mineral Electrical Insulating Oils D5236 Standard Test Method for Distillation of Heavy Hydrocarbon Mixtures (Vacuum Potstill Method) D5372 Standard Guide for Evaluation of Hydrocarbon Heat Transfer Fluids D5453 Standard Test Method for Determination of Total Sulfur in Light Hydrocarbons, Spark Ignition Engine Fuel, Diesel Engine Fuel, and Engine Oil by Ultraviolet Fluorescence D5501 Standard Test Method for Determination of Ethanol and Methanol Content in Fuels Containing Greater than 20% Ethanol by Gas Chromatography D5580 Standard Test Method for Determination of Benzene, Toluene, Ethylbenzene, p/m-Xylene, o-Xylene, C9 and Heavier Aromatics, and Total Aromatics in Finished Gasoline by Gas Chromatography D5622 Standard Test Methods for Determination of Total Oxygen in Gasoline and Methanol Fuels by Reductive Pyrolysis D5769 Standard Test Method for Determination of Benzene, Toluene, and Total Aromatics in Finished Gasolines by Gas Chromatography/Mass Spectrometry D5845 Standard Test Method for Determination of MTBE, ETBE, TAME, DIPE, Methanol, Ethanol and tert-Butanol in Gasoline by Infrared Spectroscopy D5983 Standard Specification for Methyl Tertiary-Butyl Ether (MTBE) for Downstream Blending for Use in Automotive Spark-Ignition Engine Fuel D5986 Standard Test Method for Determination of Oxygenates, Benzene, Toluene, C D6074 Standard Guide for Characterizing Hydrocarbon Lubricant Base Oils D6158 Standard Specification for Mineral Hydraulic Oils D6201 Standard Test Method for Dynamometer Evaluation of Unleaded Spark-Ignition Engine Fuel for Intake Valve Deposit Formation D6224 Standard Practice for In-Service Monitoring of Lubricating Oil for Auxiliary Power Plant Equipment D6227 Standard Specification for Unleaded Aviation Gasoline Containing a Non-hydrocarbon Component D6277 Standard Test Method for Determination of Benzene in Spark-Ignition Engine Fuels Using Mid Infrared Spectroscopy D6304 Standard Test Method for Determination of Water in Petroleum Products, Lubricating Oils, and Additives by Coulometric Karl Fischer Titration D6448 Standard Specification for Industrial Burner Fuels from Used Lubricating Oils D6469 Standard Guide for Microbial Contamination in Fuels and Fuel Systems D6560 Standard Test Method for Determination of Asphaltenes (Heptane Insolubles) in Crude Petroleum and Petroleum Products D6593 Standard Test Method for Evaluation of Automotive Engine Oils for Inhibition of Deposit Formation in a Spark-Ignition Internal Combustion Engine Fueled with Gasoline and Operated Under Low-Temperature, Light-Duty Conditions D6615 Standard Specification for Jet B Wide-Cut Aviation Turbine Fuel D6710 Standard Guide for Evaluation of Hydrocarbon-Based Quench Oil D6750 Standard Test Methods for Evaluation of Engine Oils in a High-Speed, Single-Cylinder Diesel Engine—1K Procedure (0.4 % Fuel Sulfur) and 1N Procedure (0.04 % Fuel Sulfur) D6813 Standard Guide for Performance Evaluation of Hydraulic Fluids for Piston Pumps D6822 Standard Test Method for Density, Relative Density, and API Gravity of Crude Petroleum and Liquid Petroleum Products by Thermohydrometer Method D6823 Standard Specification for Commercial Boiler Fuels With Used Lubricating Oils D6871 Standard Specification for Natural (Vegetable Oil) Ester Fluids Used in Electrical Apparatus D6923 Standard Test Method for Evaluation of Engine Oils in a High Speed, Single-Cylinder Diesel Engine—Caterpillar 1R Test Procedure D7041 Standard Test Method for Determination of Total Sulfur in Light Hydrocarbons, Motor Fuels, and Oils by Online Gas Chromatography with Flame Photometric Detection D7044 Standard Specification for Biodegradable Fire Resistant Hydraulic Fluids D7223 Standard Specification for Aviation Certification Turbine Fuel D7371 Standard Test Method for Determination of Biodiesel (Fatty Acid Methyl Esters) Content in Diesel Fuel Oil Using Mid Infrared Spectroscopy (FTIR-ATR-PLS Method) D7416 Standard Practice for Analysis of In-Service Lubricants Using a Particular Five-Part (Dielectric Permittivity, Time-Resolved Dielectric Permittivity with Switching Magnetic Fields, Laser Particle Counter, Microscopic Debris Analysis, and Orbital Viscome D7547 Standard Specification for Hydrocarbon Only Unleaded Aviation Gasoline D7566 Standard Specification for Aviation Turbine Fuel Containing Synthesized Hydrocarbons D7576 Standard Test Method for Determination of Benzene and Total Aromatics in Denatured Fuel Ethanol by Gas Chromatography D7592 Standard Specification for Specification for Grade 94 Unleaded Aviation Gasoline Certification and Test Fuel D7618 Standard Specification for Ethyl Tertiary-Butyl Ether (ETBE) for Blending with Aviation Spark-Ignition Engine Fuel D7620 Standard Test Method for Determination of Total Sulfur in Liquid Hydrocarbon Based Fuels by Continuous Injection, Air Oxidation and Ultraviolet Fluorescence Detection D7665 Standard Guide for Evaluation of Biodegradable Heat Transfer Fluids D7719 Standard Specification for High Octane Unleaded Test Fuel E126 Standard Test Method for Inspection, Calibration, and Verification of ASTM Hydrometers F631 Standard Guide for Collecting Skimmer Performance Data in Controlled Environments F715 Standard Test Methods for Coated Fabrics Used for Oil Spill Control and Storage F2084/F2084M Standard Guide for Collecting Containment Boom Performance Data in Controlled Environments F2709 Standard Test Method for Determining Nameplate Recovery Rate of Stationary Oil Skimmer Systems Referenced ASTM Standards
The documents listed below are referenced within the subject standard but are not provided as part of the standard.
| ||