ASTM D1149 - 07(2012) Standard Test Methods for Rubber Deterioration—Cracking in an Ozone Controlled Environment


    Citing ASTM Standards Citation data is made available by participants in CrossRefs Cited-by Linking service. A comprehensive list of citations to this standard are listed here.

    C149 Standard Test Method for Thermal Shock Resistance of Glass Containers

    C425 Standard Specification for Compression Joints for Vitrified Clay Pipe and Fittings

    C505 Standard Specification for Nonreinforced Concrete Irrigation Pipe with Rubber Gasket Joints

    C505M Standard Specification for Nonreinforced Concrete Irrigation Pipe With Rubber Gasket Joints (Metric)

    C509 Standard Specification for Elastomeric Cellular Preformed Gasket and Sealing Material

    C542 Standard Specification for Lock-Strip Gaskets

    C564 Standard Specification for Rubber Gaskets for Cast Iron Soil Pipe and Fittings

    C864 Standard Specification for Dense Elastomeric Compression Seal Gaskets, Setting Blocks, and Spacers

    C923M Standard Specification for Resilient Connectors Between Reinforced Concrete Manhole Structures, Pipes, and Laterals (Metric)

    C923 Standard Specification for Resilient Connectors Between Reinforced Concrete Manhole Structures, Pipes, and Laterals

    C1115 Standard Specification for Dense Elastomeric Silicone Rubber Gaskets and Accessories

    C1173 Standard Specification for Flexible Transition Couplings for Underground Piping Systems

    C1208/C1208M Standard Specification for Vitrified Clay Pipe and Joints for Use in Microtunneling, Sliplining, Pipe Bursting, and Tunnels

    C1440 Standard Specification for Thermoplastic Elastomeric (TPE) Gasket Materials for Drain, Waste, and Vent (DWV), Sewer, Sanitary and Storm Plumbing Systems

    C1478M Standard Specification for Storm Drain Resilient Connectors Between Reinforced Concrete Storm Sewer Structures, Pipes, and Laterals (Metric)

    C1478 Standard Specification for Storm Drain Resilient Connectors Between Reinforced Concrete Storm Sewer Structures, Pipes, and Laterals

    C1619 Standard Specification for Elastomeric Seals for Joining Concrete Structures

    C1644 Standard Specification for Resilient Connectors Between Reinforced Concrete On-Site Wastewater Tanks and Pipes

    D378 Standard Test Methods for Rubber (Elastomeric) Conveyor Belting, Flat Type

    D380 Standard Test Methods for Rubber Hose

    D429 Standard Test Methods for Rubber Property—Adhesion to Rigid Substrates

    D622 Standard Test Methods for Rubber Hose for Automotive Air and Vacuum Brake System

    D1171 Standard Test Method for Rubber Deterioration—Surface Ozone Cracking Outdoors or Chamber (Triangular Specimens)

    D2000 Standard Classification System for Rubber Products in Automotive Applications

    D2628 Standard Specification for Preformed Polychloroprene Elastomeric Joint Seals for Concrete Pavements

    D3468/D3468M Standard Specification for Liquid-Applied Neoprene and Chlorosulfonated Polyethylene Used in Roofing and Waterproofing

    D3542 Standard Specification for Preformed Polychloroprene Elastomeric Joint Seals for Bridges

    D3667 Standard Specification for Rubber Seals Used in Flat-Plate Solar Collectors

    D3771 Standard Specification for Rubber Seals Used in Concentrating Solar Collectors

    D3832 Standard Specification for Rubber Seals Contacting Liquids in Solar Energy Systems

    D3903 Standard Specification for Rubber Seals Used in Air-Heat Transport of Solar Energy Systems

    D4000 Standard Classification System for Specifying Plastic Materials

    D4014 Standard Specification for Plain and Steel-Laminated Elastomeric Bearings for Bridges

    D4575 Standard Test Methods for Rubber Deterioration—Reference and Alternative Method(s) for Determining Ozone Level in Laboratory Test Chambers

    D4637/D4637M Standard Specification for EPDM Sheet Used In Single-Ply Roof Membrane

    D4740 Standard Test Method for Cleanliness and Compatibility of Residual Fuels by Spot Test

    D4811/D4811M Standard Specification for Nonvulcanized (Uncured) Rubber Sheet Used as Roof Flashing

    D5926 Standard Specification for Poly (Vinyl Chloride) (PVC) Gaskets for Drain, Waste, and Vent (DWV), Sewer, Sanitary, and Storm Plumbing Systems

    D5973 Standard Specification for Elastomeric Strip Seals with Steel Locking Edge Rails Used in Expansion Joint Sealing

    D6434 Standard Guide for the Selection of Test Methods for Flexible Polypropylene Geomembranes

    D6878/D6878M Standard Specification for Thermoplastic Polyolefin Based Sheet Roofing

    D6924 Standard Specification for Preformed Thermoplastic Vulcanizate Elastomeric Joint Seals for Bridges

    D6973 Standard Test Method for Indicating Wear Characteristics of Petroleum Hydraulic Fluids in a High Pressure Constant Volume Vane Pump

    D7095 Standard Test Method for Rapid Determination of Corrosiveness to Copper from Petroleum Products Using a Disposable Copper Foil Strip

    D7106 Standard Guide for Selection of Test Methods for Ethylene Propylene Diene Terpolymer (EPDM) Geomembranes

    D7465 Standard Specification for Ethylene Propylene Diene Terpolymer (EPDM) Sheet Used In Geomembrane Applications

    E1612/E1612M Standard Specification for Preformed Architectural Compression Seals for Buildings and Parking Structures

    E1783/E1783M Standard Specification for Preformed Architectural Strip Seals for Buildings and Parking Structures

    E2203 Standard Specification for Dense Thermoplastic Elastomers Used for Compression Seals, Gaskets, Setting Blocks, Spacers and Accessories

    F477 Standard Specification for Elastomeric Seals (Gaskets) for Joining Plastic Pipe

    F715 Standard Test Methods for Coated Fabrics Used for Oil Spill Control and Storage

    F724 Standard Test Method for Outdoor Evaluation of Tire Sidewall Component Cracking Resistance

    F913 Standard Specification for Thermoplastic Elastomeric Seals (Gaskets) for Joining Plastic Pipe

    F2320 Standard Specification for Rubber Insulating Sheeting

    F3049 Standard Guide for Characterizing Properties of Metal Powders Used for Additive Manufacturing Processes

    F3049 Standard Guide for Characterizing Properties of Metal Powders Used for Additive Manufacturing Processes

    F3049 Standard Guide for Characterizing Properties of Metal Powders Used for Additive Manufacturing Processes

    F3049 Standard Guide for Characterizing Properties of Metal Powders Used for Additive Manufacturing Processes

    F3049 Standard Guide for Characterizing Properties of Metal Powders Used for Additive Manufacturing Processes

    F3049 Standard Guide for Characterizing Properties of Metal Powders Used for Additive Manufacturing Processes

    F3049 Standard Guide for Characterizing Properties of Metal Powders Used for Additive Manufacturing Processes

    F3049 Standard Guide for Characterizing Properties of Metal Powders Used for Additive Manufacturing Processes

    F3049 Standard Guide for Characterizing Properties of Metal Powders Used for Additive Manufacturing Processes

    F3049 Standard Guide for Characterizing Properties of Metal Powders Used for Additive Manufacturing Processes

    F3049 Standard Guide for Characterizing Properties of Metal Powders Used for Additive Manufacturing Processes

    F3049 Standard Guide for Characterizing Properties of Metal Powders Used for Additive Manufacturing Processes

    F3049 Standard Guide for Characterizing Properties of Metal Powders Used for Additive Manufacturing Processes

    F3049 Standard Guide for Characterizing Properties of Metal Powders Used for Additive Manufacturing Processes

    F3049 Standard Guide for Characterizing Properties of Metal Powders Used for Additive Manufacturing Processes

    F3049 Standard Guide for Characterizing Properties of Metal Powders Used for Additive Manufacturing Processes

    F3049 Standard Guide for Characterizing Properties of Metal Powders Used for Additive Manufacturing Processes

    F3049 Standard Guide for Characterizing Properties of Metal Powders Used for Additive Manufacturing Processes

    F3049 Standard Guide for Characterizing Properties of Metal Powders Used for Additive Manufacturing Processes

    F3049 Standard Guide for Characterizing Properties of Metal Powders Used for Additive Manufacturing Processes

    F3049 Standard Guide for Characterizing Properties of Metal Powders Used for Additive Manufacturing Processes

    F3049 Standard Guide for Characterizing Properties of Metal Powders Used for Additive Manufacturing Processes

    F3049 Standard Guide for Characterizing Properties of Metal Powders Used for Additive Manufacturing Processes

    F3049 Standard Guide for Characterizing Properties of Metal Powders Used for Additive Manufacturing Processes

    F3049 Standard Guide for Characterizing Properties of Metal Powders Used for Additive Manufacturing Processes

    F3049 Standard Guide for Characterizing Properties of Metal Powders Used for Additive Manufacturing Processes


    Referenced ASTM Standards The documents listed below are referenced within the subject standard but are not provided as part of the standard.

    D518 Test Method for Rubber Deterioration--Surface Cracking

    D1171 Test Method for Rubber Deterioration--Surface Ozone Cracking Outdoors or Chamber (Triangular Specimens)

    D1349 Practice for Rubber--Standard Temperatures for Testing

    D3182 Practice for Rubber--Materials, Equipment, and Procedures for Mixing Standard Compounds and Preparing Standard Vulcanized Sheets

    D3395 Test Methods for Rubber Deterioration--Dynamic Ozone Cracking in a Chamber

    D4575 Test Methods for Rubber Deterioration--Reference and Alternative Method(s) for Determining Ozone Level in Laboratory Test Chambers