ASTM D1079 - 13e1 Standard Terminology Relating to Roofing and Waterproofing


    Citing ASTM Standards Citation data is made available by participants in CrossRefs Cited-by Linking service. A comprehensive list of citations to this standard are listed here.

    C717 Standard Terminology of Building Seals and Sealants

    C981 Standard Guide for Design of Built-Up Bituminous Membrane Waterproofing Systems for Building Decks

    C1153 Standard Practice for Location of Wet Insulation in Roofing Systems Using Infrared Imaging

    D146/D146M Standard Test Methods for Sampling and Testing Bitumen-Saturated Felts and Woven Fabrics for Roofing and Waterproofing

    D173/D173M Standard Specification for Bitumen-Saturated Cotton Fabrics Used in Roofing and Waterproofing

    D226/D226M Standard Specification for Asphalt-Saturated Organic Felt Used in Roofing and Waterproofing

    D227/D227M Standard Specification for Coal-Tar-Saturated Organic Felt Used in Roofing and Waterproofing

    D228/D228M Standard Test Methods for Sampling, Testing, and Analysis of Asphalt Roll Roofing, Cap Sheets, and Shingles Used in Roofing and Waterproofing

    D312 Standard Specification for Asphalt Used in Roofing

    D1327/D1327M Standard Specification for Bitumen-Saturated Woven Burlap Fabrics Used in Roofing and Waterproofing

    D1668/D1668M Standard Specification for Glass Fabrics (Woven and Treated) for Roofing and Waterproofing

    D1970/D1970M Standard Specification for Self-Adhering Polymer Modified Bituminous Sheet Materials Used as Steep Roofing Underlayment for Ice Dam Protection

    D2178/D2178M Standard Specification for Asphalt Glass Felt Used in Roofing and Waterproofing

    D2626/D2626M Standard Specification for Asphalt-Saturated and Coated Organic Felt Base Sheet Used in Roofing

    D2822/D2822M Standard Specification for Asphalt Roof Cement, Asbestos Containing

    D2829 Standard Practice for Sampling and Analysis of Existing Built-Up Roof Systems

    D3018/D3018M Standard Specification for Class A Asphalt Shingles Surfaced with Mineral Granules

    D3161/D3161M Standard Test Method for Wind-Resistance of Steep Slope Roofing Products (Fan-Induced Method)

    D3462/D3462M Standard Specification for Asphalt Shingles Made from Glass Felt and Surfaced with Mineral Granules

    D3791/D3791M Standard Practice for Evaluating the Effects of Heat on Asphalts

    D3909/D3909M Standard Specification for Asphalt Roll Roofing (Glass Felt) Surfaced With Mineral Granules

    D4601/D4601M Standard Specification for Asphalt-Coated Glass Fiber Base Sheet Used in Roofing

    D4811/D4811M Standard Specification for Nonvulcanized (Uncured) Rubber Sheet Used as Roof Flashing

    D4869/D4869M Standard Specification for Asphalt-Saturated Organic Felt Underlayment Used in Steep Slope Roofing

    D4897/D4897M Standard Specification for Asphalt-Coated Glass-Fiber Venting Base Sheet Used in Roofing

    D4990 Standard Specification for Coal Tar Glass Felt Used in Roofing and Waterproofing

    D5076/D5076M Standard Test Method for Measuring Voids in Roofing and Waterproofing Membranes

    D5081/D5081M Standard Test Method for Aggregate Layer Hiding Power

    D5100/D5100M Standard Test Method for Adhesion of Mineral Aggregate to Hot Bitumen

    D5295/D5295M Standard Guide for Preparation of Concrete Surfaces for Adhered (Bonded) Membrane Waterproofing Systems

    D5405/D5405M Standard Test Method for Conducting Time-to-Failure (Creep-Rupture) Tests of Joints Fabricated from Nonbituminous Organic Roof Membrane Material

    D5469/D5469M Standard Guide for Application of New Spray Applied Polyurethane Foam and Coated Roofing Systems

    D5602/D5602M Standard Test Method for Static Puncture Resistance of Roofing Membrane Specimens

    D5635/D5635M Standard Test Method for Dynamic Puncture Resistance of Roofing Membrane Specimens

    D5636/D5636M Standard Test Method for Low Temperature Unrolling of Felt or Sheet Roofing and Waterproofing Materials

    D5665/D5665M Standard Specification for Thermoplastic Fabrics Used in Cold-Applied Roofing and Waterproofing

    D5683/D5683M Standard Test Method for Flexibility of Roofing and Waterproofing Materials and Membranes

    D5726 Standard Specification for Thermoplastic Fabrics Used in Hot-Applied Roofing and Waterproofing

    D5843 Standard Guide for Application of Fully Adhered Vulcanized Rubber Sheets Used in Waterproofing

    D5849/D5849M Standard Test Method for Evaluating Resistance of Modified Bituminous Roofing Membrane to Cyclic Fatigue (Joint Displacement)

    D5869 Standard Practice for Dark Oven Heat Exposure of Roofing and Waterproofing Materials

    D5898/D5898M Standard Guide for Standard Details for Adhered Sheet Waterproofing

    D5957 Standard Guide for Flood Testing Horizontal Waterproofing Installations

    D6152/D6152M Standard Specification for SEBS-Modified Mopping Asphalt Used in Roofing

    D6162 Standard Specification for Styrene Butadiene Styrene (SBS) Modified Bituminous Sheet Materials Using a Combination of Polyester and Glass Fiber Reinforcements

    D6163 Standard Specification for Styrene Butadiene Styrene (SBS) Modified Bituminous Sheet Materials Using Glass Fiber Reinforcements

    D6164/D6164M Standard Specification for Styrene Butadiene Styrene (SBS) Modified Bituminous Sheet Materials Using Polyester Reinforcements

    D6221/D6221M Standard Specification for Reinforced Bituminous Flashing Sheets for Roofing and Waterproofing

    D6222/D6222M Standard Specification for Atactic Polypropylene (APP) Modified Bituminous Sheet Materials Using Polyester Reinforcements

    D6223/D6223M Standard Specification for Atactic Polypropylene (APP) Modified Bituminous Sheet Materials Using a Combination of Polyester and Glass Fiber Reinforcements

    D6294/D6294M Standard Test Method for Corrosion Resistance of Ferrous Metal Fastener Assemblies Used in Roofing and Waterproofing

    D6298 Standard Specification for Fiberglass Reinforced Styrene-Butadiene-Styrene (SBS) Modified Bituminous Sheets with a Factory Applied Metal Surface

    D6356/D6356M Standard Test Method for Hydrogen Gas Generation of Aluminum Emulsified Asphalt Used as a Protective Coating for Roofing

    D6369 Standard Guide for Design of Standard Flashing Details for EPDM Roof Membranes

    D6380/D6380M Standard Specification for Asphalt Roll Roofing (Organic Felt)

    D6381/D6381M Standard Test Method for Measurement of Asphalt Shingle Mechanical Uplift Resistance

    D6382/D6382M Standard Practice for Dynamic Mechanical Analysis and Thermogravimetry of Roofing and Waterproofing Membrane Material

    D6383/D6383M Standard Practice for Time-to-Failure (Creep-Rupture) of Adhesive Joints Fabricated from EPDM Roof Membrane Material

    D6451/D6451M Standard Guide for Application of Asphalt Based Protection Board

    D6455 Standard Guide for the Selection of Test Methods for Prefabricated Bituminous Geomembranes (PBGM)

    D6509/D6509M Standard Specification for Atactic Polypropylene (APP) Modified Bituminous Base Sheet Materials Using Glass Fiber Reinforcements

    D6510 Standard Guide for Selection of Asphalt Used in Built-Up Roofing Systems

    D6622 Standard Guide for Application of Fully Adhered Hot-Applied Reinforced Waterproofing Systems

    D6694/D6694M Standard Specification for Liquid-Applied Silicone Coating Used in Spray Polyurethane Foam Roofing Systems

    D6754/D6754M Standard Specification for Ketone Ethylene Ester Based Sheet Roofing

    D6757 Standard Specification for Underlayment Felt Containing Inorganic Fibers Used in Steep-Slope Roofing

    D6769/D6769M Standard Guide for Application of Fully Adhered, Cold-Applied, Prefabricated Reinforced Modified Bituminous Membrane Waterproofing Systems

    D6947/D6947M Standard Specification for Liquid Applied Moisture Cured Polyurethane Coating Used in Spray Polyurethane Foam Roofing System

    D6950/D6950M Standard Practice for Application of Heat Weldable Atactic Polypropylene (APP) Modified Bituminous Waterproofing Membranes Systems for New Building Decks

    D7053/D7053M Standard Guide for Determining and Evaluating Causes of Water Leakage of Low-Sloped Roofs

    D7105 Standard Test Method for Determining the Adhesive and Cohesive Strength Between Materials in Roofing or Waterproofing Membranes and Systems

    D7119/D7119M Standard Guide for Sampling Spray Polyurethane Foam and Coating in Roofing

    D7158/D7158M Standard Test Method for Wind Resistance of Asphalt Shingles (Uplift Force/Uplift Resistance Method)

    D7186 Standard Practice for Quality Assurance Observation of Roof Construction and Repair

    D7349/D7349M Standard Test Method for Determining the Capability of Roofing and Waterproofing Materials to Seal around Fasteners

    D7425/D7425M Standard Specification for Spray Polyurethane Foam Used for Roofing Applications

    D7492/D7492M Standard Guide for Use of Drainage System Media with Waterproofing Systems

    D7505/D7505M Standard Specification for Self-Adhesive Polyester Fabric Reinforced Polymer Modified Asphalt Steep Slope Roll Roofing Surfaced with Mineral Granules

    D7530/D7530M Standard Specification for Self-Adhesive Glass Fiber Fabric Reinforced Polymer Modified Asphalt Steep Slope Roll Roofing Surfaced with Mineral Granules

    D7586/D7586M Standard Test Method for Quantification of Air Intrusion in Low-Sloped Mechanically Attached Membrane Roof Assemblies

    D7636/D7636M Standard Practice for Sampling and Analysis of Modified Bitumen Roof Systems

    D7654/D7654M Standard Specification for Asphalt Used in Roofing Measured by Dynamic Shear Rheometer

    D7655/D7655M Standard Classification for Size of Aggregate Used as Ballast for Membrane Roof Systems

    D7832/D7832M Standard Guide for Performance Attributes of Waterproofing Membranes Applied to Below-Grade Walls / Vertical Surfaces (Enclosing Interior Spaces)

    D7954/D7954M Standard Practice for Moisture Surveying of Roofing and Waterproofing Systems Using Non-Destructive Electrical Impedance Scanners

    E241 Standard Guide for Limiting Water-Induced Damage to Buildings

    E1399/E1399M Standard Test Method for Cyclic Movement and Measuring the Minimum and Maximum Joint Widths of Architectural Joint Systems

    E1749 Standard Terminology Relating to Rigid Wall Relocatable Shelters

    E2266 Standard Guide for Design and Construction of Low-Rise Frame Building Wall Systems to Resist Water Intrusion

    E2766 Standard Practice for Installation of Roof Mounted Photovoltaic Arrays on Steep-Slope Roofs

    E2777 Standard Guide for Vegetative (Green) Roof Systems

    F412 Standard Terminology Relating to Plastic Piping Systems


    Referenced ASTM Standards The documents listed below are referenced within the subject standard but are not provided as part of the standard.

    C33 Specification for Concrete Aggregates

    C591 Specification for Unfaced Preformed Rigid Cellular Polyisocyanurate Thermal Insulation

    C1289 Specification for Faced Rigid Cellular Polyisocyanurate Thermal Insulation Board

    D312 Specification for Asphalt Used in Roofing

    D450 Specification for Coal-Tar Pitch Used in Roofing, Dampproofing, and Waterproofing

    D698 Test Methods for Laboratory Compaction Characteristics of Soil Using Standard Effort (12 400 ft-lbf/ft3 (600 kN-m/m3))

    D1557 Test Methods for Laboratory Compaction Characteristics of Soil Using Modified Effort (56,000 ft-lbf/ft3 (2,700 kN-m/m3))

    D2822 Specification for Asphalt Roof Cement, Asbestos-Containing

    D4022 Specification for Coal Tar Roof Cement, Asbestos Containing

    D4586 Specification for Asphalt Roof Cement, Asbestos-Free

    D6136 Test Method for Kerosine Number of Unsaturated (Dry) Felt by Vacuum Method