ASTM C764 - 11 Standard Specification for Mineral Fiber Loose-Fill Thermal Insulation


    Citing ASTM Standards Citation data is made available by participants in CrossRefs Cited-by Linking service. A comprehensive list of citations to this standard are listed here.

    C1015 Standard Practice for Installation of Cellulosic and Mineral Fiber Loose-Fill Thermal Insulation

    C1363 Standard Test Method for Thermal Performance of Building Materials and Envelope Assemblies by Means of a Hot Box Apparatus

    C1373/C1373M Standard Practice for Determination of Thermal Resistance of Attic Insulation Systems Under Simulated Winter Conditions

    C1374 Standard Test Method for Determination of Installed Thickness of Pneumatically Applied Loose-Fill Building Insulation

    C1558 Standard Guide for Development of Standard Data Records for Computerization of Thermal Transmission Test Data for Thermal Insulation

    C1630 Standard Guide for Development of Coverage Charts for Loose-Fill Thermal Building Insulations

    E970 Standard Test Method for Critical Radiant Flux of Exposed Attic Floor Insulation Using a Radiant Heat Energy Source


    Referenced ASTM Standards The documents listed below are referenced within the subject standard but are not provided as part of the standard.

    B152/B152M Specification for Copper Sheet, Strip, Plate, and Rolled Bar

    C168 Terminology Relating to Thermal Insulation

    C177 Test Method for Steady-State Heat Flux Measurements and Thermal Transmission Properties by Means of the Guarded-Hot-Plate Apparatus

    C390 Practice for Sampling and Acceptance of Thermal Insulation Lots

    C518 Test Method for Steady-State Thermal Transmission Properties by Means of the Heat Flow Meter Apparatus

    C687 Practice for Determination of Thermal Resistance of Loose-Fill Building Insulation

    C870 Practice for Conditioning of Thermal Insulating Materials

    C1104/C1104M Test Method for Determining the Water Vapor Sorption of Unfaced Mineral Fiber Insulation

    C1304 Test Method for Assessing the Odor Emission of Thermal Insulation Materials

    C1338 Test Method for Determining Fungi Resistance of Insulation Materials and Facings

    C1363 Test Method for Thermal Performance of Building Materials and Envelope Assemblies by Means of a Hot Box Apparatus

    C1374 Test Method for Determination of Installed Thickness of Pneumatically Applied Loose-Fill Building Insulation

    C1574 Guide for Determining Blown Density of Pneumatically Applied Loose-Fill Mineral Fiber Thermal Insulation

    C1630 Guide for Development of Coverage Charts for Loose-Fill Thermal Building Insulations

    E136 Test Method for Behavior of Materials in a Vertical Tube Furnace at 750C

    E970 Test Method for Critical Radiant Flux of Exposed Attic Floor Insulation Using a Radiant Heat Energy Source

    G1 Practice for Preparing, Cleaning, and Evaluating Corrosion Test Specimens