ASTM C717 - 14a Standard Terminology of Building Seals and Sealants


    Citing ASTM Standards Citation data is made available by participants in CrossRefs Cited-by Linking service. A comprehensive list of citations to this standard are listed here.

    C509 Standard Specification for Elastomeric Cellular Preformed Gasket and Sealing Material

    C510 Standard Test Method for Staining and Color Change of Single- or Multicomponent Joint Sealants

    C603 Standard Test Method for Extrusion Rate and Application Life of Elastomeric Sealants

    C639 Standard Test Method for Rheological (Flow) Properties of Elastomeric Sealants

    C661 Standard Test Method for Indentation Hardness of Elastomeric-Type Sealants by Means of a Durometer

    C679 Standard Test Method for Tack-Free Time of Elastomeric Sealants

    C681 Standard Test Method for Volatility of Oil- and Resin-Based, Knife-Grade, Channel Glazing Compounds

    C711 Standard Test Method for Low-Temperature Flexibility and Tenacity of One-Part, Elastomeric, Solvent-Release Type Sealants

    C712 Standard Test Method for Bubbling of One-Part, Elastomeric, Solvent-Release Type Sealants

    C716 Standard Specification for Installing Lock-Strip Gaskets and Infill Glazing Materials

    C719 Standard Test Method for Adhesion and Cohesion of Elastomeric Joint Sealants Under Cyclic Movement (Hockman Cycle)

    C731 Standard Test Method for Extrudability, After Package Aging, of Latex Sealants

    C732 Standard Test Method for Aging Effects of Artificial Weathering on Latex Sealants

    C734 Standard Test Method for Low-Temperature Flexibility of Latex Sealants After Artificial Weathering

    C736 Standard Test Method for Extension-Recovery and Adhesion of Latex Sealants

    C765 Standard Test Method for Low-Temperature Flexibility of Preformed Tape Sealants

    C771 Standard Test Method for Weight Loss After Heat Aging of Preformed Tape Sealants

    C772 Standard Test Method for Oil Migration or Plasticizer Bleed-Out of Preformed Tape Sealants

    C782 Standard Test Method for Softness of Preformed Tape Sealants

    C792 Standard Test Method for Effects of Heat Aging on Weight Loss, Cracking, and Chalking of Elastomeric Sealants

    C793 Standard Test Method for Effects of Laboratory Accelerated Weathering on Elastomeric Joint Sealants

    C794 Standard Test Method for Adhesion-in-Peel of Elastomeric Joint Sealants

    C834 Standard Specification for Latex Sealants

    C836/C836M Standard Specification for High Solids Content, Cold Liquid-Applied Elastomeric Waterproofing Membrane for Use with Separate Wearing Course

    C864 Standard Specification for Dense Elastomeric Compression Seal Gaskets, Setting Blocks, and Spacers

    C879 Standard Test Methods for Release Papers Used with Preformed Tape Sealants

    C898/C898M Standard Guide for Use of High Solids Content, Cold Liquid-Applied Elastomeric Waterproofing Membrane With Separate Wearing Course

    C907 Standard Test Method for Tensile Adhesive Strength of Preformed Tape Sealants by Disk Method

    C908 Standard Test Method for Yield Strength of Preformed Tape Sealants

    C910 Standard Test Method for Bond and Cohesion of One-Part Elastomeric Solvent Release-Type Sealants

    C919 Standard Practice for Use of Sealants in Acoustical Applications

    C920 Standard Specification for Elastomeric Joint Sealants

    C957/C957M Standard Specification for High-Solids Content, Cold Liquid-Applied Elastomeric Waterproofing Membrane With Integral Wearing Surface

    C961 Standard Test Method for Lap Shear Strength of Sealants

    C963 Standard Specification for Packaging, Identification, Shipment, and Storage of Lock-Strip Gaskets

    C972 Standard Test Method for Compression-Recovery of Tape Sealant

    C981 Standard Guide for Design of Built-Up Bituminous Membrane Waterproofing Systems for Building Decks

    C1016 Standard Test Method for Determination of Water Absorption of Sealant Backing (Joint Filler) Material

    C1021 Standard Practice for Laboratories Engaged in Testing of Building Sealants

    C1083 Standard Test Method for Water Absorption of Cellular Elastomeric Gaskets and Sealing Materials

    C1087 Standard Test Method for Determining Compatibility of Liquid-Applied Sealants with Accessories Used in Structural Glazing Systems

    C1115 Standard Specification for Dense Elastomeric Silicone Rubber Gaskets and Accessories

    C1127 Standard Guide for Use of High Solids Content, Cold Liquid-Applied Elastomeric Waterproofing Membrane with an Integral Wearing Surface

    C1135 Standard Test Method for Determining Tensile Adhesion Properties of Structural Sealants

    C1166 Standard Test Method for Flame Propagation of Dense and Cellular Elastomeric Gaskets and Accessories

    C1183/C1183M Standard Test Method for Extrusion Rate of Elastomeric Sealants

    C1184 Standard Specification for Structural Silicone Sealants

    C1193 Standard Guide for Use of Joint Sealants

    C1216/C1216M Standard Test Method for Adhesion and Cohesion of One-Part Elastomeric Solvent Release Sealants

    C1241 Standard Test Method for Volume Shrinkage of Latex Sealants During Cure

    C1246 Standard Test Method for Effects of Heat Aging on Weight Loss, Cracking, and Chalking of Elastomeric Sealants After Cure

    C1247 Standard Test Method for Durability of Sealants Exposed to Continuous Immersion in Liquids

    C1248 Standard Test Method for Staining of Porous Substrate by Joint Sealants

    C1249 Standard Guide for Secondary Seal for Sealed Insulating Glass Units for Structural Sealant Glazing Applications

    C1250 Standard Test Method for Nonvolatile Content of Cold Liquid-Applied Elastomeric Waterproofing Membranes

    C1253 Standard Test Method for Determining the Outgassing Potential of Sealant Backing

    C1257 Standard Test Method for Accelerated Weathering of Solvent-Release-Type Sealants

    C1265 Standard Test Method for Determining the Tensile Properties of an Insulating Glass Edge Seal for Structural Glazing Applications

    C1266 Standard Test Method for Flow Characteristics of Preformed Tape Sealants

    C1281 Standard Specification for Preformed Tape Sealants for Glazing Applications

    C1294 Standard Test Method for Compatibility of Insulating Glass Edge Sealants with Liquid-Applied Glazing Materials

    C1305 Standard Test Method for Crack Bridging Ability of Liquid-Applied Waterproofing Membrane

    C1306 Standard Test Method for Hydrostatic Pressure Resistance of a Liquid-Applied Waterproofing Membrane

    C1311 Standard Specification for Solvent Release Sealants

    C1330 Standard Specification for Cylindrical Sealant Backing for Use with Cold Liquid-Applied Sealants

    C1367 Standard Test Method for Dead Load Resistance of a Sealant in Elevated Temperatures

    C1369 Standard Specification for Secondary Edge Sealants for Structurally Glazed Insulating Glass Units

    C1375 Standard Guide for Substrates Used in Testing Building Seals and Sealants

    C1382 Standard Test Method for Determining Tensile Adhesion Properties of Sealants When Used in Exterior Insulation and Finish Systems (EIFS) Joints

    C1392 Standard Guide for Evaluating Failure of Structural Sealant Glazing

    C1394 Standard Guide for In-Situ Structural Silicone Glazing Evaluation

    C1401 Standard Guide for Structural Sealant Glazing

    C1442 Standard Practice for Conducting Tests on Sealants Using Artificial Weathering Apparatus

    C1471/C1471M Standard Guide for the Use of High Solids Content Cold Liquid-Applied Elastomeric Waterproofing Membrane on Vertical Surfaces

    C1472 Standard Guide for Calculating Movement and Other Effects When Establishing Sealant Joint Width

    C1481 Standard Guide for Use of Joint Sealants with Exterior Insulation and Finish Systems (EIFS)

    C1487 Standard Guide for Remedying Structural Silicone Glazing

    C1501 Standard Test Method for Color Stability of Building Construction Sealants as Determined by Laboratory Accelerated Weathering Procedures

    C1518 Standard Specification for Precured Elastomeric Silicone Joint Sealants

    C1519 Standard Test Method for Evaluating Durability of Building Construction Sealants by Laboratory Accelerated Weathering Procedures

    C1520 Standard Guide for Paintability of Latex Sealants

    C1521 Standard Practice for Evaluating Adhesion of Installed Weatherproofing Sealant Joints

    C1522 Standard Test Method for Extensibility After Heat Aging of Cold Liquid-Applied Elastomeric Waterproofing Membranes

    C1523 Standard Test Method for Determining Modulus, Tear and Adhesion Properties of Precured Elastomeric Joint Sealants

    C1536 Standard Test Method for Measuring the Yield for Aerosol Foam Sealants

    C1564 Standard Guide for Use of Silicone Sealants for Protective Glazing Systems

    C1589/C1589M Standard Practice for Outdoor Weathering of Construction Seals and Sealants

    C1620 Standard Specification for Aerosol Polyurethane and Aerosol Latex Foam Sealants

    C1635 Standard Test Method to Evaluate Adhesion/Cohesion Properties of a Sealant at Fixed Extension

    C1642 Standard Practice for Determining Air Leakage Rates of Aerosol Foam Sealants and Other Construction Joint Fill and Insulation Materials

    C1643 Standard Test Method to Measuring the Post Dispensing Volumetric Expansion of Aerosol Foam Sealants

    C1735 Standard Test Method for Measuring the Time Dependent Modulus of Sealants Using Stress Relaxation

    C1736 Standard Practice for Non-Destructive Evaluation of Adhesion of Installed Weatherproofing Sealant Joints Using a Rolling Device

    C1756 Standard Guide for Comparing Sealant Behavior to Reference Photographs

    D996 Standard Terminology of Packaging and Distribution Environments

    D2202 Standard Test Method for Slump of Sealants

    D2203 Standard Test Method for Staining from Sealants

    D2377 Standard Test Method for Tack-Free Time of Caulking Compounds and Sealants

    D2452 Standard Test Method for Extrudability of Oil- and Resin-Base Caulking Compounds

    D2453 Standard Test Method for Shrinkage and Tenacity of Oil- and Resin-Base Caulking Compounds

    D3667 Standard Specification for Rubber Seals Used in Flat-Plate Solar Collectors

    D3771 Standard Specification for Rubber Seals Used in Concentrating Solar Collectors

    D3903 Standard Specification for Rubber Seals Used in Air-Heat Transport of Solar Energy Systems

    D5747/D5747M Standard Practice for Tests to Evaluate the Chemical Resistance of Geomembranes to Liquids

    D5926 Standard Specification for Poly (Vinyl Chloride) (PVC) Gaskets for Drain, Waste, and Vent (DWV), Sewer, Sanitary, and Storm Plumbing Systems

    E241 Standard Guide for Limiting Water-Induced Damage to Buildings

    E2112 Standard Practice for Installation of Exterior Windows, Doors and Skylights

    E2188 Standard Test Method for Insulating Glass Unit Performance

    E2189 Standard Test Method for Testing Resistance to Fogging in Insulating Glass Units

    E2190 Standard Specification for Insulating Glass Unit Performance and Evaluation

    E2203 Standard Specification for Dense Thermoplastic Elastomers Used for Compression Seals, Gaskets, Setting Blocks, Spacers and Accessories

    E2266 Standard Guide for Design and Construction of Low-Rise Frame Building Wall Systems to Resist Water Intrusion

    E2269 Standard Test Method for Determining Argon Concentration in Sealed Insulating Glass Units using Gas Chromatography

    E2649 Standard Test Method for Determining Argon Concentration in Sealed Insulating Glass Units Using Spark Emission Spectroscopy

    E2688 Standard Practice for Specimen Preparation and Mounting of Tapes to Assess Surface Burning Characteristics

    E2690 Standard Practice for Specimen Preparation and Mounting of Caulks and Sealants to Assess Surface Burning Characteristics


    Referenced ASTM Standards The documents listed below are referenced within the subject standard but are not provided as part of the standard.

    A644 Terminology Relating to Iron Castings

    C509 Specification for Elastomeric Cellular Preformed Gasket and Sealing Material

    C542 Specification for Lock-Strip Gaskets

    C716 Specification for Installing Lock-Strip Gaskets and Infill Glazing Materials

    C797 Practices for Use of Oil- and Resin-Based Putty and Glazing Compounds

    C961 Test Method for Lap Shear Strength of Sealants

    C964 Guide for Lock-Strip Gasket Glazing

    C1021 Practice for Laboratories Engaged in Testing of Building Sealants

    C1193 Guide for Use of Joint Sealants

    D883 Terminology Relating to Plastics

    D1079 Terminology Relating to Roofing and Waterproofing

    D1565 Specification for Flexible Cellular Materials--Vinyl Chloride Polymers and Copolymers (Open-Cell Foam)

    D1566 Terminology Relating to Rubber

    D2102 Test Method for Shrinkage of Textile Fibers (Bundle Test)

    E631 Terminology of Building Constructions