ASTM C647 - 08(2013) Standard Guide to Properties and Tests of Mastics and Coating Finishes for Thermal Insulation


    Citing ASTM Standards Citation data is made available by participants in CrossRefs Cited-by Linking service. A comprehensive list of citations to this standard are listed here.

    C419 Standard Practice for Making and Curing Test Specimens of Mastic Thermal Insulation Coatings

    C755 Standard Practice for Selection of Water Vapor Retarders for Thermal Insulation


    Referenced ASTM Standards The documents listed below are referenced within the subject standard but are not provided as part of the standard.

    C168 Terminology Relating to Thermal Insulation

    C419 Practice for Making and Curing Test Specimens of Mastic Thermal Insulation Coatings

    C461 Test Methods for Mastics and Coatings Used With Thermal Insulation

    C488 Test Method for Conducting Exterior Exposure Tests of Finishes for Thermal Insulation

    C639 Test Method for Rheological (Flow) Properties of Elastomeric Sealants

    C681 Test Method for Volatility of Oil- and Resin-Based, Knife-Grade, Channel Glazing Compounds

    C733 Test Method for Volume Shrinkage of Latex Sealants

    C755 Practice for Selection of Water Vapor Retarders for Thermal Insulation

    C792 Test Method for Effects of Heat Aging on Weight Loss, Cracking, and Chalking of Elastomeric Sealants

    D36 Test Method for Softening Point of Bitumen (Ring-and-Ball Apparatus)

    D56 Test Method for Flash Point by Tag Closed Cup Tester

    D92 Test Method for Flash and Fire Points by Cleveland Open Cup Tester

    D93 Test Methods for Flash Point by Pensky-Martens Closed Cup Tester

    D529 Practice for Enclosed Carbon-Arc Exposures of Bituminous Materials

    D543 Practices for Evaluating the Resistance of Plastics to Chemical Reagents

    D562 Test Method for Consistency of Paints Measuring Krebs Unit (KU) Viscosity Using a Stormer-Type Viscometer

    D638 Test Method for Tensile Properties of Plastics

    D658 Test Method for Abrasion Resistance of Organic Coatings by Air Blast Abrasive

    D747 Test Method for Apparent Bending Modulus of Plastics by Means of a Cantilever Beam

    D790 Test Methods for Flexural Properties of Unreinforced and Reinforced Plastics and Electrical Insulating Materials

    D822 Practice for Filtered Open-Flame Carbon-Arc Exposures of Paint and Related Coatings

    D903 Test Method for Peel or Stripping Strength of Adhesive Bonds

    D968 Test Methods for Abrasion Resistance of Organic Coatings by Falling Abrasive

    D1310 Test Method for Flash Point and Fire Point of Liquids by Tag Open-Cup Apparatus

    D1640 Test Methods for Drying, Curing, or Film Formation of Organic Coatings at Room Temperature

    D1654 Test Method for Evaluation of Painted or Coated Specimens Subjected to Corrosive Environments

    D1729 Practice for Visual Appraisal of Colors and Color Differences of Diffusely-Illuminated Opaque Materials

    D1823 Test Method for Apparent Viscosity of Plastisols and Organosols at High Shear Rates by Extrusion Viscometer

    D1824 Test Method for Apparent Viscosity of Plastisols and Organosols at Low Shear Rates

    D1849 Test Method for Package Stability of Paint

    D2196 Test Methods for Rheological Properties of Non-Newtonian Materials by Rotational (Brookfield type) Viscometer

    D2243 Test Method for Freeze-Thaw Resistance of Water-Borne Coatings

    D2354 Test Method for Minimum Film Formation Temperature (MFFT) of Emulsion Vehicles

    D2444 Test Method for Determination of the Impact Resistance of Thermoplastic Pipe and Fittings by Means of a Tup (Falling Weight)

    D2453 Test Method for Shrinkage and Tenacity of Oil- and Resin-Base Caulking Compounds

    D2485 Test Methods for Evaluating Coatings For High Temperature Service

    D2507 Terminology of Rheological Properties of Gelled Rocket Propellants

    D2939 Test Methods for Emulsified Bitumens Used as Protective Coatings

    D3134 Practice for Establishing Color and Gloss Tolerances

    D3274 Test Method for Evaluating Degree of Surface Disfigurement of Paint Films by Fungal or Algal Growth, or Soil and Dirt Accumulation

    D3361 Practice for Unfiltered Open-Flame Carbon-Arc Exposures of Paint and Related Coatings

    D3828 Test Methods for Flash Point by Small Scale Closed Cup Tester

    D4339 Test Method for Determination of the Odor of Adhesives

    E84 Test Method for Surface Burning Characteristics of Building Materials

    E96/E96M Test Methods for Water Vapor Transmission of Materials

    E162 Test Method for Surface Flammability of Materials Using a Radiant Heat Energy Source

    E659 Test Method for Autoignition Temperature of Liquid Chemicals

    G21 Practice for Determining Resistance of Synthetic Polymeric Materials to Fungi

    G23 Practice for Operating Light-Exposure Apparatus (Carbon-Arc Type) With and Without Water for Exposure of Nonmetallic Materials