ASTM C518 - 10 Standard Test Method for Steady-State Thermal Transmission Properties by Means of the Heat Flow Meter Apparatus


    Citing ASTM Standards Citation data is made available by participants in CrossRefs Cited-by Linking service. A comprehensive list of citations to this standard are listed here.

    C177 Standard Test Method for Steady-State Heat Flux Measurements and Thermal Transmission Properties by Means of the Guarded-Hot-Plate Apparatus

    C195 Standard Specification for Mineral Fiber Thermal Insulating Cement

    C196 Standard Specification for Expanded or Exfoliated Vermiculite Thermal Insulating Cement

    C209 Standard Test Methods for Cellulosic Fiber Insulating Board

    C240 Standard Test Methods of Testing Cellular Glass Insulation Block

    C335/C335M Standard Test Method for Steady-State Heat Transfer Properties of Pipe Insulation

    C447 Standard Practice for Estimating the Maximum Use Temperature of Thermal Insulations

    C449 Standard Specification for Mineral Fiber Hydraulic-Setting Thermal Insulating and Finishing Cement

    C516 Standard Specification for Vermiculite Loose Fill Thermal Insulation

    C533 Standard Specification for Calcium Silicate Block and Pipe Thermal Insulation

    C534/C534M Standard Specification for Preformed Flexible Elastomeric Cellular Thermal Insulation in Sheet and Tubular Form

    C549 Standard Specification for Perlite Loose Fill Insulation

    C551/C551M Standard Specification for Asbestos-Cement Fiberboard Insulating Panels

    C552 Standard Specification for Cellular Glass Thermal Insulation

    C553 Standard Specification for Mineral Fiber Blanket Thermal Insulation for Commercial and Industrial Applications

    C578 Standard Specification for Rigid, Cellular Polystyrene Thermal Insulation

    C591 Standard Specification for Unfaced Preformed Rigid Cellular Polyisocyanurate Thermal Insulation

    C592 Standard Specification for Mineral Fiber Blanket Insulation and Blanket-Type Pipe Insulation (Metal-Mesh Covered) (Industrial Type)

    C610 Standard Specification for Molded Expanded Perlite Block and Pipe Thermal Insulation

    C612 Standard Specification for Mineral Fiber Block and Board Thermal Insulation

    C653 Standard Guide for Determination of the Thermal Resistance of Low-Density Blanket-Type Mineral Fiber Insulation

    C656 Standard Specification for Structural Insulating Board, Calcium Silicate

    C665 Standard Specification for Mineral-Fiber Blanket Thermal Insulation for Light Frame Construction and Manufactured Housing

    C680 Standard Practice for Estimate of the Heat Gain or Loss and the Surface Temperatures of Insulated Flat, Cylindrical, and Spherical Systems by Use of Computer Programs

    C687 Standard Practice for Determination of Thermal Resistance of Loose-Fill Building Insulation

    C726 Standard Specification for Mineral Wool Roof Insulation Board

    C728 Standard Specification for Perlite Thermal Insulation Board

    C739 Standard Specification for Cellulosic Fiber Loose-Fill Thermal Insulation

    C764 Standard Specification for Mineral Fiber Loose-Fill Thermal Insulation

    C800 Standard Specification for Fibrous Glass Blanket Insulation (Aircraft Type)

    C991 Standard Specification for Flexible Fibrous Glass Insulation for Metal Buildings

    C1014 Standard Specification for Spray-Applied Mineral Fiber Thermal and Sound Absorbing Insulation

    C1029 Standard Specification for Spray-Applied Rigid Cellular Polyurethane Thermal Insulation

    C1041 Standard Practice for In-Situ Measurements of Heat Flux in Industrial Thermal Insulation Using Heat Flux Transducers

    C1044 Standard Practice for Using a Guarded-Hot-Plate Apparatus or Thin-Heater Apparatus in the Single-Sided Mode

    C1045 Standard Practice for Calculating Thermal Transmission Properties Under Steady-State Conditions

    C1046 Standard Practice for In-Situ Measurement of Heat Flux and Temperature on Building Envelope Components

    C1058/C1058M Standard Practice for Selecting Temperatures for Evaluating and Reporting Thermal Properties of Thermal Insulation

    C1071 Standard Specification for Fibrous Glass Duct Lining Insulation (Thermal and Sound Absorbing Material)

    C1086 Standard Specification for Glass Fiber Mechanically Bonded Felt Thermal Insulation

    C1114 Standard Test Method for Steady-State Thermal Transmission Properties by Means of the Thin-Heater Apparatus

    C1126 Standard Specification for Faced or Unfaced Rigid Cellular Phenolic Thermal Insulation

    C1130 Standard Practice for Calibrating Thin Heat Flux Transducers

    C1139 Standard Specification for Fibrous Glass Thermal Insulation and Sound Absorbing Blanket and Board for Military Applications

    C1149 Standard Specification for Self-Supported Spray Applied Cellulosic Thermal Insulation

    C1199 Standard Test Method for Measuring the Steady-State Thermal Transmittance of Fenestration Systems Using Hot Box Methods

    C1224 Standard Specification for Reflective Insulation for Building Applications

    C1289 Standard Specification for Faced Rigid Cellular Polyisocyanurate Thermal Insulation Board

    C1290 Standard Specification for Flexible Fibrous Glass Blanket Insulation Used to Externally Insulate HVAC Ducts

    C1303/C1303M Standard Test Method for Predicting Long-Term Thermal Resistance of Closed-Cell Foam Insulation

    C1363 Standard Test Method for Thermal Performance of Building Materials and Envelope Assemblies by Means of a Hot Box Apparatus

    C1373/C1373M Standard Practice for Determination of Thermal Resistance of Attic Insulation Systems Under Simulated Winter Conditions

    C1393 Standard Specification for Perpendicularly Oriented Mineral Fiber Roll and Sheet Thermal Insulation for Pipes and Tanks

    C1410 Standard Specification for Cellular Melamine Thermal and Sound-Absorbing Insulation

    C1427 Standard Specification for Extruded Preformed Flexible Cellular Polyolefin Thermal Insulation in Sheet and Tubular Form

    C1470 Standard Guide for Testing the Thermal Properties of Advanced Ceramics

    C1482 Standard Specification for Polyimide Flexible Cellular Thermal and Sound Absorbing Insulation

    C1484 Standard Specification for Vacuum Insulation Panels

    C1512 Standard Test Method for Characterizing the Effect of Exposure to Environmental Cycling on Thermal Performance of Insulation Products

    C1534 Standard Specification for Flexible Polymeric Foam Sheet Insulation Used as a Thermal and Sound Absorbing Liner for Duct Systems

    C1558 Standard Guide for Development of Standard Data Records for Computerization of Thermal Transmission Test Data for Thermal Insulation

    C1594 Standard Specification for Polyimide Rigid Cellular Thermal Insulation

    C1617 Standard Practice for Quantitative Accelerated Laboratory Evaluation of Extraction Solutions Containing Ions Leached from Thermal Insulation on Aqueous Corrosion of Metals

    C1667 Standard Test Method for Using Heat Flow Meter Apparatus to Measure the Center-of-Panel Thermal Resistivity of Vacuum Panels

    C1676 Standard Specification for Microporous Thermal Insulation

    C1696 Standard Guide for Industrial Thermal Insulation Systems

    C1728 Standard Specification for Flexible Aerogel Insulation

    C1774 Standard Guide for Thermal Performance Testing of Cryogenic Insulation Systems

    C1784 Standard Test Method for Using a Heat Flow Meter Apparatus for Measuring Thermal Storage Properties of Phase Change Materials and Products

    D3575 Standard Test Methods for Flexible Cellular Materials Made From Olefin Polymers

    D3748 Standard Practice for Evaluating High-Density Rigid Cellular Plastics

    D4612 Standard Practice for Calculating Thermal Diffusivity of Rocks

    D4819 Standard Specification for Flexible Cellular Materials Made From Polyolefin Plastics

    D5364 Standard Guide for Design, Fabrication, and Erection of Fiberglass Reinforced (FRP) Plastic Chimney Liners with Coal-Fired Units

    D5930 Standard Test Method for Thermal Conductivity of Plastics by Means of a Transient Line-Source Technique

    D6744 Standard Test Method for Determination of the Thermal Conductivity of Anode Carbons by the Guarded Heat Flow Meter Technique

    D7425/D7425M Standard Specification for Spray Polyurethane Foam Used for Roofing Applications

    E861 Standard Practice for Evaluating Thermal Insulation Materials for Use in Solar Collectors

    E1091 Standard Specification for Nonmetallic Honeycomb Core for Use in Shelter Panels

    E1231 Standard Practice for Calculation of Hazard Potential Figures-of-Merit for Thermally Unstable Materials

    E1530 Standard Test Method for Evaluating the Resistance to Thermal Transmission of Materials by the Guarded Heat Flow Meter Technique

    E1591 Standard Guide for Obtaining Data for Fire Growth Models

    E1730 Standard Specification for Rigid Foam for Use in Structural Sandwich Panel Cores

    E2336 Standard Test Methods for Fire Resistive Grease Duct Enclosure Systems

    E2684 Standard Test Method for Measuring Heat Flux Using Surface-Mounted One-Dimensional Flat Gages

    E2816 Standard Test Methods for Fire Resistive Metallic HVAC Duct Systems

    F433 Standard Practice for Evaluating Thermal Conductivity of Gasket Materials


    Referenced ASTM Standards The documents listed below are referenced within the subject standard but are not provided as part of the standard.

    C167 Test Methods for Thickness and Density of Blanket or Batt Thermal Insulations

    C168 Terminology Relating to Thermal Insulation

    C177 Test Method for Steady-State Heat Flux Measurements and Thermal Transmission Properties by Means of the Guarded-Hot-Plate Apparatus

    C236 Test Method for Steady-State Thermal Performance of Building Assemblies by Means of a Guarded Hot Box

    C687 Practice for Determination of Thermal Resistance of Loose-Fill Building Insulation

    C976 Test Method for Thermal Performance of Building Assemblies by Means of a Calibrated Hot Box

    C1045 Practice for Calculating Thermal Transmission Properties Under Steady-State Conditions

    C1046 Practice for In-Situ Measurement of Heat Flux and Temperature on Building Envelope Components

    C1058 Practice for Selecting Temperatures for Evaluating and Reporting Thermal Properties of Thermal Insulation

    C1114 Test Method for Steady-State Thermal Transmission Properties by Means of the Thin-Heater Apparatus

    C1363 Test Method for Thermal Performance of Building Materials and Envelope Assemblies by Means of a Hot Box Apparatus

    E178 Practice for Dealing With Outlying Observations

    E230 Specification and Temperature-Electromotive Force (EMF) Tables for Standardized Thermocouples

    E691 Practice for Conducting an Interlaboratory Study to Determine the Precision of a Test Method