ASTM C39 / C39M - 14a Standard Test Method for Compressive Strength of Cylindrical Concrete Specimens


    Citing ASTM Standards Citation data is made available by participants in CrossRefs Cited-by Linking service. A comprehensive list of citations to this standard are listed here.

    A627 Standard Test Methods for Tool-Resisting Steel Bars, Flats, and Shapes for Detention and Correctional Facilities

    A849 Standard Specification for Post-Applied Coatings, Pavings, and Linings for Corrugated Steel Sewer and Drainage Pipe

    A979/A979M Standard Specification for Concrete Pavements and Linings Installed in Corrugated Steel Structures in the Field

    C42/C42M Standard Test Method for Obtaining and Testing Drilled Cores and Sawed Beams of Concrete

    C94/C94M Standard Specification for Ready-Mixed Concrete

    C226 Standard Specification for Air-Entraining Additions for Use in the Manufacture of Air-Entraining Hydraulic Cement

    C233/C233M Standard Test Method for Air-Entraining Admixtures for Concrete

    C330/C330M Standard Specification for Lightweight Aggregates for Structural Concrete

    C361 Standard Specification for Reinforced Concrete Low-Head Pressure Pipe

    C361M Standard Specification for Reinforced Concrete Low-Head Pressure Pipe (Metric)

    C387/C387M Standard Specification for Packaged, Dry, Combined Materials for Concrete and High Strength Mortar

    C465 Standard Specification for Processing Additions for Use in the Manufacture of Hydraulic Cements

    C469/C469M Standard Test Method for Static Modulus of Elasticity and Poisson’s Ratio of Concrete in Compression

    C478 Standard Specification for Precast Reinforced Concrete Manhole Sections

    C478M Standard Specification for Precast Reinforced Concrete Manhole Sections (Metric)

    C494/C494M Standard Specification for Chemical Admixtures for Concrete

    C495/C495M Standard Test Method for Compressive Strength of Lightweight Insulating Concrete

    C496/C496M Standard Test Method for Splitting Tensile Strength of Cylindrical Concrete Specimens

    C497M Standard Test Methods for Concrete Pipe, Manhole Sections, or Tile (Metric)

    C497 Standard Test Methods for Concrete Pipe, Manhole Sections, or Tile

    C512/C512M Standard Test Method for Creep of Concrete in Compression

    C513 Standard Test Method for Obtaining and Testing Specimens of Hardened Lightweight Insulating Concrete for Compressive Strength

    C593 Standard Specification for Fly Ash and Other Pozzolans for Use With Lime for Soil Stabilization

    C685/C685M Standard Specification for Concrete Made by Volumetric Batching and Continuous Mixing

    C688 Standard Specification for Functional Additions for Use in Hydraulic Cements

    C780 Standard Test Method for Preconstruction and Construction Evaluation of Mortars for Plain and Reinforced Unit Masonry

    C825 Standard Specification for Precast Concrete Barriers

    C858 Standard Specification for Underground Precast Concrete Utility Structures

    C873/C873M Standard Test Method for Compressive Strength of Concrete Cylinders Cast in Place in Cylindrical Molds

    C882/C882M Standard Test Method for Bond Strength of Epoxy-Resin Systems Used With Concrete By Slant Shear

    C913 Standard Specification for Precast Concrete Water and Wastewater Structures

    C915 Standard Specification for Precast Reinforced Concrete Crib Wall Members

    C918/C918M Standard Test Method for Measuring Early-Age Compressive Strength and Projecting Later-Age Strength

    C928/C928M Standard Specification for Packaged, Dry, Rapid-Hardening Cementitious Materials for Concrete Repairs

    C935 Standard Specification for General Requirements for Prestressed Concrete Poles Statically Cast

    C979/C979M Standard Specification for Pigments for Integrally Colored Concrete

    C1017/C1017M Standard Specification for Chemical Admixtures for Use in Producing Flowing Concrete

    C1019 Standard Test Method for Sampling and Testing Grout

    C1037 Standard Practice for Inspection of Underground Precast Concrete Utility Structures

    C1074 Standard Practice for Estimating Concrete Strength by the Maturity Method

    C1077 Standard Practice for Agencies Testing Concrete and Concrete Aggregates for Use in Construction and Criteria for Testing Agency Evaluation

    C1089 Standard Specification for Spun Cast Prestressed Concrete Poles

    C1116/C1116M Standard Specification for Fiber-Reinforced Concrete

    C1144 Standard Test Method for Splitting Tensile Strength for Brittle Nuclear Waste Forms

    C1176/C1176M Standard Practice for Making Roller-Compacted Concrete in Cylinder Molds Using a Vibrating Table

    C1227 Standard Specification for Precast Concrete Septic Tanks

    C1231/C1231M Standard Practice for Use of Unbonded Caps in Determination of Compressive Strength of Hardened Concrete Cylinders

    C1245/C1245M Standard Test Method for Determining Relative Bond Strength Between Hardened Roller Compacted Concrete Lifts (Point Load Test)

    C1433 Standard Specification for Precast Reinforced Concrete Monolithic Box Sections for Culverts, Storm Drains, and Sewers

    C1433M Standard Specification for Precast Reinforced Concrete Monolithic Box Sections for Culverts, Storm Drains, and Sewers (Metric)

    C1435/C1435M Standard Practice for Molding Roller-Compacted Concrete in Cylinder Molds Using a Vibrating Hammer

    C1439 Standard Test Methods for Evaluating Latex and Powder Polymer Modifiers for use in Hydraulic Cement Concrete and Mortar

    C1504 Standard Specification for Manufacture of Precast Reinforced Concrete Three-Sided Structures for Culverts and Storm Drains

    C1504M Standard Specification for Manufacture of Precast Reinforced Concrete Three-Sided Structures for Culverts and Storm Drains (Metric)

    C1582/C1582M Standard Specification for Admixtures to Inhibit Chloride-Induced Corrosion of Reinforcing Steel in Concrete

    C1602/C1602M Standard Specification for Mixing Water Used in the Production of Hydraulic Cement Concrete

    C1604/C1604M Standard Test Method for Obtaining and Testing Drilled Cores of Shotcrete

    C1613 Standard Specification for Precast Concrete Grease Interceptor Tanks

    C1622/C1622M Standard Specification for Cold-Weather Admixture Systems

    C1646/C1646M Standard Practice for Making and Curing Test Specimens for Evaluating Resistance of Coarse Aggregate to Freezing and Thawing in Air-Entrained Concrete

    C1670/C1670M Standard Specification for Adhered Manufactured Stone Masonry Veneer (AMSMV) Units

    C1693 Standard Specification for Autoclaved Aerated Concrete (AAC)

    C1709 Standard Guide for Evaluation of Alternative Supplementary Cementitious Materials (ASCM) for Use in Concrete

    C1731 Standard Specification for Concrete Floor Tile

    C1768/C1768M Standard Practice for Accelerated Curing of Concrete Cylinders

    D4832 Standard Test Method for Preparation and Testing of Controlled Low Strength Material (CLSM) Test Cylinders

    D6449 Standard Test Method for Flow of Fine Aggregate Concrete for Fabric Formed Concrete (Flow Cone Method)

    D6684 Standard Specification for Materials and Manufacture of Articulating Concrete Block (ACB) Revetment Systems

    D7147 Standard Specification for Testing and Establishing Allowable Loads of Joist Hangers

    D7853 Standard Test Method for Hydraulic Pullout Resistance of a Geomembrane with Locking Extensions Embedded in Concrete

    E488/E488M Standard Test Methods for Strength of Anchors in Concrete Elements

    F1090 Standard Classification for Bank and Mercantile Vault Construction

    F1741 Standard Practice for Installation of Machine Spiral Wound Poly (Vinyl Chloride) (PVC) Liner Pipe for Rehabilitation of Existing Sewers and Conduits

    F2551 Standard Practice for Installing a Protective Cementitious Liner System in Sanitary Sewer Manholes


    Referenced ASTM Standards The documents listed below are referenced within the subject standard but are not provided as part of the standard.

    C31/C31M Practice for Making and Curing Concrete Test Specimens in the Field

    C42/C42M Test Method for Obtaining and Testing Drilled Cores and Sawed Beams of Concrete

    C192/C192M Practice for Making and Curing Concrete Test Specimens in the Laboratory

    C617 Practice for Capping Cylindrical Concrete Specimens

    C670 Practice for Preparing Precision and Bias Statements for Test Methods for Construction Materials

    C873 Test Method for Compressive Strength of Concrete Cylinders Cast in Place in Cylindrical Molds

    C1077 Practice for Agencies Testing Concrete and Concrete Aggregates for Use in Construction and Criteria for Testing Agency Evaluation

    C1231/C1231M Practice for Use of Unbonded Caps in Determination of Compressive Strength of Hardened Concrete Cylinders

    E4 Practices for Force Verification of Testing Machines

    E74 Practice of Calibration of Force-Measuring Instruments for Verifying the Force Indication of Testing Machines