Standards

ASTM C305 - 12 Standard Practice for Mechanical Mixing of Hydraulic Cement Pastes and Mortars of Plastic Consistency

Citing ASTM Standards Citation data is made available by participants in CrossRefs Cited-by Linking service. A comprehensive list of citations to this standard are listed here.

C10/C10M Standard Specification for Natural Cement

C87/C87M Standard Test Method for Effect of Organic Impurities in Fine Aggregate on Strength of Mortar

C109/C109M Standard Test Method for Compressive Strength of Hydraulic Cement Mortars (Using 2-in. or [50-mm] Cube Specimens)

C110 Standard Test Methods for Physical Testing of Quicklime, Hydrated Lime, and Limestone

C141/C141M Standard Specification for Hydrated Hydraulic Lime for Structural Purposes

C151/C151M Standard Test Method for Autoclave Expansion of Hydraulic Cement

C156 Standard Test Method for Water Loss [from a Mortar Specimen] Through Liquid Membrane-Forming Curing Compounds for Concrete

C157/C157M Standard Test Method for Length Change of Hardened Hydraulic-Cement Mortar and Concrete

C185 Standard Test Method for Air Content of Hydraulic Cement Mortar

C187 Standard Test Method for Amount of Water Required for Normal Consistency of Hydraulic Cement Paste

C191 Standard Test Methods for Time of Setting of Hydraulic Cement by Vicat Needle

C227 Standard Test Method for Potential Alkali Reactivity of Cement-Aggregate Combinations (Mortar-Bar Method)

C265 Standard Test Method for Water-Extractable Sulfate in Hydrated Hydraulic Cement Mortar

C266 Standard Test Method for Time of Setting of Hydraulic-Cement Paste by Gillmore Needles

C270 Standard Specification for Mortar for Unit Masonry

C348 Standard Test Method for Flexural Strength of Hydraulic-Cement Mortars

C359 Standard Test Method for Early Stiffening of Hydraulic Cement (Mortar Method)

C387/C387M Standard Specification for Packaged, Dry, Combined Materials for Concrete and High Strength Mortar

C399 Standard Practice for Use of Chemical-Resistant Resin Mortars

C451 Standard Test Method for Early Stiffening of Hydraulic Cement (Paste Method)

C452/C452M Standard Test Method for Potential Expansion of Portland-Cement Mortars Exposed to Sulfate

C563 Standard Test Method for Approximation of Optimum SO3 in Hydraulic Cement Using Compressive Strength

C593 Standard Specification for Fly Ash and Other Pozzolans for Use With Lime for Soil Stabilization

C596 Standard Test Method for Drying Shrinkage of Mortar Containing Hydraulic Cement

C806 Standard Test Method for Restrained Expansion of Expansive Cement Mortar

C807 Standard Test Method for Time of Setting of Hydraulic Cement Mortar by Modified Vicat Needle

C827/C827M Standard Test Method for Change in Height at Early Ages of Cylindrical Specimens of Cementitious Mixtures

C887 Standard Specification for Packaged, Dry, Combined Materials for Surface Bonding Mortar

C932 Standard Specification for Surface-Applied Bonding Compounds for Exterior Plastering

C1012/C1012M Standard Test Method for Length Change of Hydraulic-Cement Mortars Exposed to a Sulfate Solution

C1038/C1038M Standard Test Method for Expansion of Hydraulic Cement Mortar Bars Stored in Water

C1073 Standard Test Method for Hydraulic Activity of Slag Cement by Reaction with Alkali

C1090 Standard Test Method for Measuring Changes in Height of Cylindrical Specimens of Hydraulic-Cement Grout

C1093 Standard Practice for Accreditation of Testing Agencies for Masonry

C1107/C1107M Standard Specification for Packaged Dry, Hydraulic-Cement Grout (Nonshrink)

C1148 Standard Test Method for Measuring the Drying Shrinkage of Masonry Mortar

C1222 Standard Practice for Evaluation of Laboratories Testing Hydraulic Cement

C1260 Standard Test Method for Potential Alkali Reactivity of Aggregates (Mortar-Bar Method)

C1375 Standard Guide for Substrates Used in Testing Building Seals and Sealants

C1384 Standard Specification for Admixtures for Masonry Mortars

C1403 Standard Test Method for Rate of Water Absorption of Masonry Mortars

C1439 Standard Test Methods for Evaluating Polymer Modifiers in Mortar and Concrete

C1506 Standard Test Method for Water Retention of Hydraulic Cement-Based Mortars and Plasters

C1567 Standard Test Method for Determining the Potential Alkali-Silica Reactivity of Combinations of Cementitious Materials and Aggregate (Accelerated Mortar-Bar Method)

C1602/C1602M Standard Specification for Mixing Water Used in the Production of Hydraulic Cement Concrete

C1608 Standard Test Method for Chemical Shrinkage of Hydraulic Cement Paste

C1679 Standard Practice for Measuring Hydration Kinetics of Hydraulic Cementitious Mixtures Using Isothermal Calorimetry

C1698 Standard Test Method for Autogenous Strain of Cement Paste and Mortar

C1707 Standard Specification for Pozzolanic Hydraulic Lime for Structural Purposes

C1708 Standard Test Methods for Self-leveling Mortars Containing Hydraulic Cements

C1713 Standard Specification for Mortars for the Repair of Historic Masonry

C1714/C1714M Standard Specification for Preblended Dry Mortar Mix for Unit Masonry

C1738 Standard Practice for High-Shear Mixing of Hydraulic Cement Paste

D1734 Standard Practice for Making Cementitious Panels for Testing Coatings

D4843 Standard Test Method for Wetting and Drying Test of Solid Wastes

D5050 Standard Guide for Commercial Use of Lime Kiln Dusts and Portland Cement Kiln Dusts

D5239 Standard Practice for Characterizing Fly Ash for Use in Soil Stabilization

Referenced ASTM Standards The documents listed below are referenced within the subject standard but are not provided as part of the standard.