ASTM C192 / C192M - 14 Standard Practice for Making and Curing Concrete Test Specimens in the Laboratory


    Citing ASTM Standards Citation data is made available by participants in CrossRefs Cited-by Linking service. A comprehensive list of citations to this standard are listed here.

    A944 Standard Test Method for Comparing Bond Strength of Steel Reinforcing Bars to Concrete Using Beam-End Specimens

    A955/A955M Standard Specification for Deformed and Plain Stainless-Steel Bars for Concrete Reinforcement

    A1081/A1081M Standard Test Method for Evaluating Bond of Seven-Wire Steel Prestressing Strand

    C39/C39M Standard Test Method for Compressive Strength of Cylindrical Concrete Specimens

    C78/C78M Standard Test Method for Flexural Strength of Concrete (Using Simple Beam with Third-Point Loading)

    C110 Standard Test Methods for Physical Testing of Quicklime, Hydrated Lime, and Limestone

    C157/C157M Standard Test Method for Length Change of Hardened Hydraulic-Cement Mortar and Concrete

    C215 Standard Test Method for Fundamental Transverse, Longitudinal, and Torsional Frequencies of Concrete Specimens

    C226 Standard Specification for Air-Entraining Additions for Use in the Manufacture of Air-Entraining Hydraulic Cement

    C231/C231M Standard Test Method for Air Content of Freshly Mixed Concrete by the Pressure Method

    C232/C232M Standard Test Method for Bleeding of Concrete

    C233/C233M Standard Test Method for Air-Entraining Admixtures for Concrete

    C293/C293M Standard Test Method for Flexural Strength of Concrete (Using Simple Beam With Center-Point Loading)

    C330/C330M Standard Specification for Lightweight Aggregates for Structural Concrete

    C341/C341M Standard Practice for Preparation and Conditioning of Cast, Drilled, or Sawed Specimens of Hydraulic-Cement Mortar and Concrete Used for Length Change Measurements

    C387/C387M Standard Specification for Packaged, Dry, Combined Materials for Concrete and High Strength Mortar

    C403/C403M Standard Test Method for Time of Setting of Concrete Mixtures by Penetration Resistance

    C465 Standard Specification for Processing Additions for Use in the Manufacture of Hydraulic Cements

    C469/C469M Standard Test Method for Static Modulus of Elasticity and Poisson’s Ratio of Concrete in Compression

    C470/C470M Standard Specification for Molds for Forming Concrete Test Cylinders Vertically

    C494/C494M Standard Specification for Chemical Admixtures for Concrete

    C496/C496M Standard Test Method for Splitting Tensile Strength of Cylindrical Concrete Specimens

    C512/C512M Standard Test Method for Creep of Concrete in Compression

    C567/C567M Standard Test Method for Determining Density of Structural Lightweight Concrete

    C666/C666M Standard Test Method for Resistance of Concrete to Rapid Freezing and Thawing

    C672/C672M Standard Test Method for Scaling Resistance of Concrete Surfaces Exposed to Deicing Chemicals

    C796/C796M Standard Test Method for Foaming Agents for Use in Producing Cellular Concrete Using Preformed Foam

    C827/C827M Standard Test Method for Change in Height at Early Ages of Cylindrical Specimens of Cementitious Mixtures

    C858 Standard Specification for Underground Precast Concrete Utility Structures

    C862 Standard Practice for Preparing Refractory Concrete Specimens by Casting

    C878/C878M Standard Test Method for Restrained Expansion of Shrinkage-Compensating Concrete

    C882/C882M Standard Test Method for Bond Strength of Epoxy-Resin Systems Used With Concrete By Slant Shear

    C918/C918M Standard Test Method for Measuring Early-Age Compressive Strength and Projecting Later-Age Strength

    C928/C928M Standard Specification for Packaged, Dry, Rapid-Hardening Cementitious Materials for Concrete Repairs

    C943 Standard Practice for Making Test Cylinders and Prisms for Determining Strength and Density of Preplaced-Aggregate Concrete in the Laboratory

    C979/C979M Standard Specification for Pigments for Integrally Colored Concrete

    C1017/C1017M Standard Specification for Chemical Admixtures for Use in Producing Flowing Concrete

    C1074 Standard Practice for Estimating Concrete Strength by the Maturity Method

    C1116/C1116M Standard Specification for Fiber-Reinforced Concrete

    C1144 Standard Test Method for Splitting Tensile Strength for Brittle Nuclear Waste Forms

    C1176/C1176M Standard Practice for Making Roller-Compacted Concrete in Cylinder Molds Using a Vibrating Table

    C1202 Standard Test Method for Electrical Indication of Concrete's Ability to Resist Chloride Ion Penetration

    C1231/C1231M Standard Practice for Use of Unbonded Caps in Determination of Compressive Strength of Hardened Concrete Cylinders

    C1245/C1245M Standard Test Method for Determining Relative Bond Strength Between Hardened Roller Compacted Concrete Lifts (Point Load Test)

    C1293 Standard Test Method for Determination of Length Change of Concrete Due to Alkali-Silica Reaction

    C1399/C1399M Standard Test Method for Obtaining Average Residual-Strength of Fiber-Reinforced Concrete

    C1439 Standard Test Methods for Evaluating Latex and Powder Polymer Modifiers for use in Hydraulic Cement Concrete and Mortar

    C1543 Standard Test Method for Determining the Penetration of Chloride Ion into Concrete by Ponding

    C1556 Standard Test Method for Determining the Apparent Chloride Diffusion Coefficient of Cementitious Mixtures by Bulk Diffusion

    C1579 Standard Test Method for Evaluating Plastic Shrinkage Cracking of Restrained Fiber Reinforced Concrete (Using a Steel Form Insert)

    C1581/C1581M Standard Test Method for Determining Age at Cracking and Induced Tensile Stress Characteristics of Mortar and Concrete under Restrained Shrinkage

    C1585 Standard Test Method for Measurement of Rate of Absorption of Water by Hydraulic-Cement Concretes

    C1602/C1602M Standard Specification for Mixing Water Used in the Production of Hydraulic Cement Concrete

    C1609/C1609M Standard Test Method for Flexural Performance of Fiber-Reinforced Concrete (Using Beam With Third-Point Loading)

    C1610/C1610M Standard Test Method for Static Segregation of Self-Consolidating Concrete Using Column Technique

    C1622/C1622M Standard Specification for Cold-Weather Admixture Systems

    C1646/C1646M Standard Practice for Making and Curing Test Specimens for Evaluating Resistance of Coarse Aggregate to Freezing and Thawing in Air-Entrained Concrete

    C1688/C1688M Standard Test Method for Density and Void Content of Freshly Mixed Pervious Concrete

    C1698 Standard Test Method for Autogenous Strain of Cement Paste and Mortar

    C1712 Standard Test Method for Rapid Assessment of Static Segregation Resistance of Self-Consolidating Concrete Using Penetration Test

    C1747/C1747M Standard Test Method for Determining Potential Resistance to Degradation of Pervious Concrete by Impact and Abrasion

    C1757 Standard Test Method for ?Determination of One-Point, Bulk Water Sorption of Dried Concrete

    C1758/C1758M Standard Practice for Fabricating Test Specimens with Self-Consolidating Concrete

    C1760 Standard Test Method for Bulk Electrical Conductivity of Hardened Concrete

    C1768/C1768M Standard Practice for Accelerated Curing of Concrete Cylinders

    C1792 Standard Test Method for Measurement of Mass Loss versus Time for One-Dimensional Drying of Saturated Concretes

    D1985 Standard Practice for Preparing Concrete Blocks for Testing Sealants, for Joints and Cracks

    D4832 Standard Test Method for Preparation and Testing of Controlled Low Strength Material (CLSM) Test Cylinders

    D5139 Standard Specification for Sample Preparation for Qualification Testing of Coatings to be Used in Nuclear Power Plants

    D7705/D7705M Standard Test Method for Alkali Resistance of Fiber Reinforced Polymer (FRP) Matrix Composite Bars used in Concrete Construction

    E660 Standard Practice for Accelerated Polishing of Aggregates or Pavement Surfaces Using a Small-Wheel, Circular Track Polishing Machine

    G109 Standard Test Method for Determining Effects of Chemical Admixtures on Corrosion of Embedded Steel Reinforcement in Concrete Exposed to Chloride Environments


    Referenced ASTM Standards The documents listed below are referenced within the subject standard but are not provided as part of the standard.

    C70 Test Method for Surface Moisture in Fine Aggregate

    C125 Terminology Relating to Concrete and Concrete Aggregates

    C127 Test Method for Density, Relative Density (Specific Gravity), and Absorption of Coarse Aggregate

    C128 Test Method for Density, Relative Density (Specific Gravity), and Absorption of Fine Aggregate

    C138/C138M Test Method for Density (Unit Weight), Yield, and Air Content (Gravimetric) of Concrete

    C143/C143M Test Method for Slump of Hydraulic-Cement Concrete

    C172/C172M Practice for Sampling Freshly Mixed Concrete

    C173/C173M Test Method for Air Content of Freshly Mixed Concrete by the Volumetric Method

    C231/C231M Test Method for Air Content of Freshly Mixed Concrete by the Pressure Method

    C330/C330M Specification for Lightweight Aggregates for Structural Concrete

    C403/C403M Test Method for Time of Setting of Concrete Mixtures by Penetration Resistance

    C470/C470M Specification for Molds for Forming Concrete Test Cylinders Vertically

    C494/C494M Specification for Chemical Admixtures for Concrete

    C511 Specification for Mixing Rooms, Moist Cabinets, Moist Rooms, and Water Storage Tanks Used in the Testing of Hydraulic Cements and Concretes

    C566 Test Method for Total Evaporable Moisture Content of Aggregate by Drying

    C617/C617M Practice for Capping Cylindrical Concrete Specimens

    C1064/C1064M Test Method for Temperature of Freshly Mixed Hydraulic-Cement Concrete

    C1077 Practice for Agencies Testing Concrete and Concrete Aggregates for Use in Construction and Criteria for Testing Agency Evaluation