C163 Standard Practice for Mixing Thermal Insulating Cement Samples

C165 Standard Test Method for Measuring Compressive Properties of Thermal Insulations

C166 Standard Test Method for Covering Capacity and Volume Change Upon Drying of Thermal Insulating Cement

C167 Standard Test Methods for Thickness and Density of Blanket or Batt Thermal Insulations

C177 Standard Test Method for Steady-State Heat Flux Measurements and Thermal Transmission Properties by Means of the Guarded-Hot-Plate Apparatus

C195 Standard Specification for Mineral Fiber Thermal Insulating Cement

C196 Standard Specification for Expanded or Exfoliated Vermiculite Thermal Insulating Cement

C203 Standard Test Methods for Breaking Load and Flexural Properties of Block-Type Thermal Insulation

C208 Standard Specification for Cellulosic Fiber Insulating Board

C209 Standard Test Methods for Cellulosic Fiber Insulating Board

C240 Standard Test Methods of Testing Cellular Glass Insulation Block

C302 Standard Test Method for Density and Dimensions of Preformed Pipe-Covering-Type Thermal Insulation

C303 Standard Test Method for Dimensions and Density of Preformed Block and Board-Type Thermal Insulation

C335/C335M Standard Test Method for Steady-State Heat Transfer Properties of Pipe Insulation

C356 Standard Test Method for Linear Shrinkage of Preformed High-Temperature Thermal Insulation Subjected to Soaking Heat

C390 Standard Practice for Sampling and Acceptance of Thermal Insulation Lots

C411 Standard Test Method for Hot-Surface Performance of High-Temperature Thermal Insulation

C419 Standard Practice for Making and Curing Test Specimens of Mastic Thermal Insulation Coatings

C421 Standard Test Method for Tumbling Friability of Preformed Block-Type and Preformed Pipe-Covering-Type Thermal Insulation

C447 Standard Practice for Estimating the Maximum Use Temperature of Thermal Insulations

C449 Standard Specification for Mineral Fiber Hydraulic-Setting Thermal Insulating and Finishing Cement

C450 Standard Practice for Fabrication of Thermal Insulating Fitting Covers for NPS Piping, and Vessel Lagging

C461 Standard Test Methods for Mastics and Coatings Used With Thermal Insulation

C488 Standard Test Method for Conducting Exterior Exposure Tests of Finishes for Thermal Insulation

C516 Standard Specification for Vermiculite Loose Fill Thermal Insulation

C518 Standard Test Method for Steady-State Thermal Transmission Properties by Means of the Heat Flow Meter Apparatus

C520 Standard Test Methods for Density of Granular Loose Fill Insulations

C533 Standard Specification for Calcium Silicate Block and Pipe Thermal Insulation

C534/C534M Standard Specification for Preformed Flexible Elastomeric Cellular Thermal Insulation in Sheet and Tubular Form

C547 Standard Specification for Mineral Fiber Pipe Insulation

C549 Standard Specification for Perlite Loose Fill Insulation

C550 Standard Test Method for Measuring Trueness and Squareness of Rigid Block and Board Thermal Insulation

C552 Standard Specification for Cellular Glass Thermal Insulation

C553 Standard Specification for Mineral Fiber Blanket Thermal Insulation for Commercial and Industrial Applications

C578 Standard Specification for Rigid, Cellular Polystyrene Thermal Insulation

C585 Standard Practice for Inner and Outer Diameters of Thermal Insulation for Nominal Sizes of Pipe and Tubing

C591 Standard Specification for Unfaced Preformed Rigid Cellular Polyisocyanurate Thermal Insulation

C592 Standard Specification for Mineral Fiber Blanket Insulation and Blanket-Type Pipe Insulation (Metal-Mesh Covered) (Industrial Type)

C610 Standard Specification for Molded Expanded Perlite Block and Pipe Thermal Insulation

C612 Standard Specification for Mineral Fiber Block and Board Thermal Insulation

C647 Standard Guide to Properties and Tests of Mastics and Coating Finishes for Thermal Insulation

C653 Standard Guide for Determination of the Thermal Resistance of Low-Density Blanket-Type Mineral Fiber Insulation

C656 Standard Specification for Structural Insulating Board, Calcium Silicate

C665 Standard Specification for Mineral-Fiber Blanket Thermal Insulation for Light Frame Construction and Manufactured Housing

C667 Standard Specification for Prefabricated Reflective Insulation Systems for Equipment and Pipe Operating at Temperatures above Ambient Air

C680 Standard Practice for Estimate of the Heat Gain or Loss and the Surface Temperatures of Insulated Flat, Cylindrical, and Spherical Systems by Use of Computer Programs

C687 Standard Practice for Determination of Thermal Resistance of Loose-Fill Building Insulation

C692 Standard Test Method for Evaluating the Influence of Thermal Insulations on External Stress Corrosion Cracking Tendency of Austenitic Stainless Steel

C726 Standard Specification for Mineral Wool Roof Insulation Board

C727 Standard Practice for Installation and Use of Reflective Insulation in Building Constructions

C728 Standard Specification for Perlite Thermal Insulation Board

C739 Standard Specification for Cellulosic Fiber Loose-Fill Thermal Insulation

C755 Standard Practice for Selection of Water Vapor Retarders for Thermal Insulation

C764 Standard Specification for Mineral Fiber Loose-Fill Thermal Insulation

C795 Standard Specification for Thermal Insulation for Use in Contact with Austenitic Stainless Steel

C800 Standard Specification for Glass Fiber Blanket Insulation (Aircraft Type)

C835 Standard Test Method for Total Hemispherical Emittance of Surfaces up to 1400°C

C870 Standard Practice for Conditioning of Thermal Insulating Materials

C871 Standard Test Methods for Chemical Analysis of Thermal Insulation Materials for Leachable Chloride, Fluoride, Silicate, and Sodium Ions

C892 Standard Specification for High-Temperature Fiber Blanket Thermal Insulation

C916 Standard Specification for Adhesives for Duct Thermal Insulation

C921 Standard Practice for Determining the Properties of Jacketing Materials for Thermal Insulation

C929 Standard Practice for Handling, Transporting, Shipping, Storage, Receiving, and Application of Thermal Insulation Materials For Use in Contact with Austenitic Stainless Steel

C945 Standard Practice for Design Considerations and Spray Application of a Rigid Cellular Polyurethane Insulation System on Outdoor Service Vessels

C950/C950M Standard Practice for Repair of a Rigid Cellular Polyurethane Insulation System on Outdoor Service Vessels

C991 Standard Specification for Flexible Fibrous Glass Insulation for Metal Buildings

C1014 Standard Specification for Spray-Applied Mineral Fiber Thermal and Sound Absorbing Insulation

C1015 Standard Practice for Installation of Cellulosic and Mineral Fiber Loose-Fill Thermal Insulation

C1029 Standard Specification for Spray-Applied Rigid Cellular Polyurethane Thermal Insulation

C1043 Standard Practice for Guarded-Hot-Plate Design Using Circular Line-Heat Sources

C1044 Standard Practice for Using a Guarded-Hot-Plate Apparatus or Thin-Heater Apparatus in the Single-Sided Mode

C1045 Standard Practice for Calculating Thermal Transmission Properties Under Steady-State Conditions

C1046 Standard Practice for In-Situ Measurement of Heat Flux and Temperature on Building Envelope Components

C1058/C1058M Standard Practice for Selecting Temperatures for Evaluating and Reporting Thermal Properties of Thermal Insulation

C1060 Standard Practice for Thermographic Inspection of Insulation Installations in Envelope Cavities of Frame Buildings

C1071 Standard Specification for Fibrous Glass Duct Lining Insulation (Thermal and Sound Absorbing Material)

C1086 Standard Specification for Glass Fiber Mechanically Bonded Felt Thermal Insulation

C1101/C1101M Standard Test Methods for Classifying the Flexibility or Rigidity of Mineral Fiber Blanket and Board Insulation

C1114 Standard Test Method for Steady-State Thermal Transmission Properties by Means of the Thin-Heater Apparatus

C1126 Standard Specification for Faced or Unfaced Rigid Cellular Phenolic Thermal Insulation

C1129 Standard Practice for Estimation of Heat Savings by Adding Thermal Insulation to Bare Valves and Flanges

C1130 Standard Practice for Calibrating Thin Heat Flux Transducers

C1134 Standard Test Method for Water Retention of Rigid Thermal Insulations Following Partial Immersion

C1136 Standard Specification for Flexible, Low Permeance Vapor Retarders for Thermal Insulation

C1139 Standard Specification for Fibrous Glass Thermal Insulation and Sound Absorbing Blanket and Board for Military Applications

C1146 Standard Guide for Prefabricated Panel and H–bar Insulation Systems for Vessels, Ducts and Equipment Operating at Temperatures Above Ambient Air

C1149 Standard Specification for Self-Supported Spray Applied Cellulosic Thermal Insulation

C1153 Standard Practice for Location of Wet Insulation in Roofing Systems Using Infrared Imaging

C1155 Standard Practice for Determining Thermal Resistance of Building Envelope Components from the In-Situ Data

C1199 Standard Test Method for Measuring the Steady-State Thermal Transmittance of Fenestration Systems Using Hot Box Methods

C1224 Standard Specification for Reflective Insulation for Building Applications

C1258 Standard Test Method for Elevated Temperature and Humidity Resistance of Vapor Retarders for Insulation

C1263 Standard Test Method for Thermal Integrity of Flexible Water Vapor Retarders

C1289 Standard Specification for Faced Rigid Cellular Polyisocyanurate Thermal Insulation Board

C1290 Standard Specification for Flexible Fibrous Glass Blanket Insulation Used to Externally Insulate HVAC Ducts

C1303/C1303M Standard Test Method for Predicting Long-Term Thermal Resistance of Closed-Cell Foam Insulation

C1304 Standard Test Method for Assessing the Odor Emission of Thermal Insulation Materials

C1313/C1313M Standard Specification for Sheet Radiant Barriers for Building Construction Applications

C1320 Standard Practice for Installation of Mineral Fiber Batt and Blanket Thermal Insulation for Light Frame Construction

C1321 Standard Practice for Installation and Use of Interior Radiation Control Coating Systems (IRCCS) in Building Construction

C1335 Standard Test Method for Measuring Non-Fibrous Content of Man-Made Rock and Slag Mineral Fiber Insulation

C1340/C1340M Standard Practice for Estimation of Heat Gain or Loss Through Ceilings Under Attics Containing Radiant Barriers by Use of a Computer Program

C1363 Standard Test Method for Thermal Performance of Building Materials and Envelope Assemblies by Means of a Hot Box Apparatus

C1371 Standard Test Method for Determination of Emittance of Materials Near Room Temperature Using Portable Emissometers

C1374 Standard Test Method for Determination of Installed Thickness of Pneumatically Applied Loose-Fill Building Insulation

C1393 Standard Specification for Perpendicularly Oriented Mineral Fiber Roll and Sheet Thermal Insulation for Pipes and Tanks

C1410 Standard Specification for Cellular Melamine Thermal and Sound-Absorbing Insulation

C1423 Standard Guide for Selecting Jacketing Materials for Thermal Insulation

C1427 Standard Specification for Extruded Preformed Flexible Cellular Polyolefin Thermal Insulation in Sheet and Tubular Form

C1482 Standard Specification for Polyimide Flexible Cellular Thermal and Sound Absorbing Insulation

C1484 Standard Specification for Vacuum Insulation Panels

C1485 Standard Test Method for Critical Radiant Flux of Exposed Attic Floor Insulation Using an Electric Radiant Heat Energy Source

C1488 Standard Practice for Simulated Aging of Cellulosic Loose-Fill Insulation

C1497 Standard Specification for Cellulosic Fiber Stabilized Thermal Insulation

C1511 Standard Test Method for Determining the Water Retention (Repellency) Characteristics of Glass Fiber Insulation (Aircraft Type)

C1512 Standard Test Method for Characterizing the Effect of Exposure to Environmental Cycling on Thermal Performance of Insulation Products

C1534 Standard Specification for Flexible Polymeric Foam Sheet Insulation Used as a Thermal and Sound Absorbing Liner for Duct Systems

C1549 Standard Test Method for Determination of Solar Reflectance Near Ambient Temperature Using a Portable Solar Reflectometer

C1558 Standard Guide for Development of Standard Data Records for Computerization of Thermal Transmission Test Data for Thermal Insulation

C1559 Standard Test Method for Determining Wicking of Glass Fiber Blanket Insulation (Aircraft Type)

C1574 Standard Guide for Determining Blown Density of Pneumatically Applied Loose-Fill Mineral Fiber Thermal Insulation

C1594 Standard Specification for Polyimide Rigid Cellular Thermal Insulation

C1616 Standard Test Method for Determining the Moisture Content of Organic and Inorganic Insulation Materials by Weight

C1617 Standard Practice for Quantitative Accelerated Laboratory Evaluation of Extraction Solutions Containing Ions Leached from Thermal Insulation on Aqueous Corrosion of Metals

C1620 Standard Specification for Aerosol Polyurethane and Aerosol Latex Foam Sealants

C1630 Standard Guide for Development of Coverage Charts for Loose-Fill Thermal Building Insulations

C1639 Standard Specification for Fabrication of Cellular Glass Pipe and Tubing Insulation

C1667 Standard Test Method for Using Heat Flow Meter Apparatus to Measure the Center-of-Panel Thermal Resistivity of Vacuum Panels

C1668 Standard Specification for Externally Applied Reflective Insulation Systems on Rigid Duct in Heating, Ventilation, and Air Conditioning (HVAC) Systems

C1676 Standard Specification for Microporous Thermal Insulation

C1685 Standard Specification for Pneumatically Applied High-Temperature Fiber Thermal Insulation for Industrial Applications

C1695 Standard Specification for Fabrication of Flexible Removable and Reusable Blanket Insulation for Hot Service

C1710 Standard Guide for Installation of Flexible Closed Cell Preformed Insulation in Tube and Sheet Form

C1729 Standard Specification for Aluminum Jacketing for Insulation

C1743 Standard Practice for Installation and Use of Radiant Barrier Systems (RBS) in Residential Building Construction

C1744 Standard Practice for Installation and Use of Radiant Barrier Systems (RBS) in Commercial/Industrial Building Construction

D7425/D7425M Standard Specification for Spray Polyurethane Foam Used for Roofing Applications

E96/E96M Standard Test Methods for Water Vapor Transmission of Materials

E154 Standard Test Methods for Water Vapor Retarders Used in Contact with Earth Under Concrete Slabs, on Walls, or as Ground Cover

E241 Standard Guide for Limiting Water-Induced Damage to Buildings

E398 Standard Test Method for Water Vapor Transmission Rate of Sheet Materials Using Dynamic Relative Humidity Measurement

E631 Standard Terminology of Building Constructions

E1423 Standard Practice for Determining Steady State Thermal Transmittance of Fenestration Systems

E1730 Standard Specification for Rigid Foam for Use in Structural Sandwich Panel Cores

E1745 Standard Specification for Plastic Water Vapor Retarders Used in Contact with Soil or Granular Fill under Concrete Slabs

E1993 Standard Specification for Bituminous Water Vapor Retarders Used in Contact with Soil or Granular Fill Under Concrete Slabs

E2032 Standard Guide for Extension of Data From Fire Resistance Tests Conducted in Accordance with ASTM E 119

E2141 Standard Test Methods for Assessing the Durability of Absorptive Electrochromic Coatings on Sealed Insulating Glass Units

E2231 Standard Practice for Specimen Preparation and Mounting of Pipe and Duct Insulation Materials to Assess Surface Burning Characteristics

E2240 Standard Test Method for Assessing the Current-Voltage Cycling Stability at 90°C (194°F) of Absorptive Electrochromic Coatings on Sealed Insulating Glass Units

E2241 Standard Test Method for Assessing the Current-Voltage Cycling Stability at Room Temperature of Absorptive Electrochromic Coatings on Sealed Insulating Glass Units

E2266 Standard Guide for Design and Construction of Low-Rise Frame Building Wall Systems to Resist Water Intrusion

E2354 Standard Guide for Assessing the Durability of Absorptive Electrochromic Coatings within Sealed Insulating Glass Units

E2355 Standard Test Method for Measuring the Uniformity of an Absorptive Electrochromic Coating on a Glazing Surface

E2599 Standard Practice for Specimen Preparation and Mounting of Reflective Insulation, Radiant Barrier and Vinyl Stretch Ceiling Materials for Building Applications to Assess Surface Burning Characteristics

F683 Standard Practice for Selection and Application of Thermal Insulation for Piping and Machinery

F2165 Standard Specification for Flexible Pre-Insulated Piping

There are currently no reference documents for this standard.