ASTM C1470 - 06(2013) Standard Guide for Testing the Thermal Properties of Advanced Ceramics


    Citing ASTM Standards Citation data is made available by participants in CrossRefs Cited-by Linking service. A comprehensive list of citations to this standard are listed here.

    There are currently no referencing documents for this standard.


    Referenced ASTM Standards The documents listed below are referenced within the subject standard but are not provided as part of the standard.

    C177 Test Method for Steady-State Heat Flux Measurements and Thermal Transmission Properties by Means of the Guarded-Hot-Plate Apparatus

    C182 Test Method for Thermal Conductivity of Insulating Firebrick

    C201 Test Method for Thermal Conductivity of Refractories

    C202 Test Method for Thermal Conductivity of Refractory Brick

    C351 Test Method for Mean Specific Heat of Thermal Insulation

    C372 Test Method for Linear Thermal Expansion of Porcelain Enamel and Glaze Frits and Fired Ceramic Whiteware Products by the Dilatometer Method

    C373 Test Method for Water Absorption, Bulk Density, Apparent Porosity, and Apparent Specific Gravity of Fired Whiteware Products

    C408 Test Method for Thermal Conductivity of Whiteware Ceramics

    C518 Test Method for Steady-State Thermal Transmission Properties by Means of the Heat Flow Meter Apparatus

    C714 Test Method for Thermal Diffusivity of Carbon and Graphite by Thermal Pulse Method

    C767 Test Method for Thermal Conductivity of Carbon Refractories

    C1044 Practice for Using a Guarded-Hot-Plate Apparatus or Thin-Heater Apparatus in the Single-Sided Mode

    C1045 Practice for Calculating Thermal Transmission Properties Under Steady-State Conditions

    C1045 Practice for Calculating Thermal Transmission Properties Under Steady-State Conditions

    C1113 Test Method for Thermal Conductivity of Refractories by Hot Wire (Platinum Resistance Thermometer Technique)

    C1114 Test Method for Steady-State Thermal Transmission Properties by Means of the Thin-Heater Apparatus

    C1130 Practice for Calibrating Thin Heat Flux Transducers

    C1145 Terminology of Advanced Ceramics

    C1300 Test Method for Linear Thermal Expansion of Glaze Frits and Ceramic Whiteware Materials by the Interferometric Method

    D2766 Test Method for Specific Heat of Liquids and Solids

    E122 Practice for Calculating Sample Size to Estimate, With Specified Precision, the Average for a Characteristic of a Lot or Process

    E228 Test Method for Linear Thermal Expansion of Solid Materials With a Push-Rod Dilatometer

    E289 Test Method for Linear Thermal Expansion of Rigid Solids with Interferometry

    E408 Test Methods for Total Normal Emittance of Surfaces Using Inspection-Meter Techniques

    E423 Test Method for Normal Spectral Emittance at Elevated Temperatures of Nonconducting Specimens

    E473 Terminology Relating to Thermal Analysis and Rheology

    E831 Test Method for Linear Thermal Expansion of Solid Materials by Thermomechanical Analysis

    E1142 Terminology Relating to Thermophysical Properties

    E1225 Test Method for Thermal Conductivity of Solids by Means of the Guarded-Comparative-Longitudinal Heat Flow Technique

    E1269 Test Method for Determining Specific Heat Capacity by Differential Scanning Calorimetry

    E1461 Test Method for Thermal Diffusivity by the Flash Method

    E1530 Test Method for Evaluating the Resistance to Thermal Transmission of Materials by the Guarded Heat Flow Meter Technique

    IEEE/ASTMSI 10 Standard for Use of the International System of Units (SI) (The Modern Metric System)