ASTM C1401 - 14 Standard Guide for Structural Sealant Glazing


    Citing ASTM Standards Citation data is made available by participants in CrossRefs Cited-by Linking service. A comprehensive list of citations to this standard are listed here.

    C149 Standard Test Method for Thermal Shock Resistance of Glass Containers

    C1184 Standard Specification for Structural Silicone Sealants

    C1193 Standard Guide for Use of Joint Sealants

    C1394 Standard Guide for In-Situ Structural Silicone Glazing Evaluation

    C1472 Standard Guide for Calculating Movement and Other Effects When Establishing Sealant Joint Width

    C1487 Standard Guide for Remedying Structural Silicone Glazing

    C1564 Standard Guide for Use of Silicone Sealants for Protective Glazing Systems

    D4740 Standard Test Method for Cleanliness and Compatibility of Residual Fuels by Spot Test

    D6973 Standard Test Method for Indicating Wear Characteristics of Petroleum Hydraulic Fluids in a High Pressure Constant Volume Vane Pump

    D7095 Standard Test Method for Rapid Determination of Corrosiveness to Copper from Petroleum Products Using a Disposable Copper Foil Strip

    F3049 Standard Guide for Characterizing Properties of Metal Powders Used for Additive Manufacturing Processes

    F3049 Standard Guide for Characterizing Properties of Metal Powders Used for Additive Manufacturing Processes

    F3049 Standard Guide for Characterizing Properties of Metal Powders Used for Additive Manufacturing Processes

    F3049 Standard Guide for Characterizing Properties of Metal Powders Used for Additive Manufacturing Processes

    F3049 Standard Guide for Characterizing Properties of Metal Powders Used for Additive Manufacturing Processes

    F3049 Standard Guide for Characterizing Properties of Metal Powders Used for Additive Manufacturing Processes

    F3049 Standard Guide for Characterizing Properties of Metal Powders Used for Additive Manufacturing Processes

    F3049 Standard Guide for Characterizing Properties of Metal Powders Used for Additive Manufacturing Processes

    F3049 Standard Guide for Characterizing Properties of Metal Powders Used for Additive Manufacturing Processes

    F3049 Standard Guide for Characterizing Properties of Metal Powders Used for Additive Manufacturing Processes

    F3049 Standard Guide for Characterizing Properties of Metal Powders Used for Additive Manufacturing Processes

    F3049 Standard Guide for Characterizing Properties of Metal Powders Used for Additive Manufacturing Processes

    F3049 Standard Guide for Characterizing Properties of Metal Powders Used for Additive Manufacturing Processes

    F3049 Standard Guide for Characterizing Properties of Metal Powders Used for Additive Manufacturing Processes

    F3049 Standard Guide for Characterizing Properties of Metal Powders Used for Additive Manufacturing Processes

    F3049 Standard Guide for Characterizing Properties of Metal Powders Used for Additive Manufacturing Processes

    F3049 Standard Guide for Characterizing Properties of Metal Powders Used for Additive Manufacturing Processes

    F3049 Standard Guide for Characterizing Properties of Metal Powders Used for Additive Manufacturing Processes

    F3049 Standard Guide for Characterizing Properties of Metal Powders Used for Additive Manufacturing Processes

    F3049 Standard Guide for Characterizing Properties of Metal Powders Used for Additive Manufacturing Processes

    F3049 Standard Guide for Characterizing Properties of Metal Powders Used for Additive Manufacturing Processes

    F3049 Standard Guide for Characterizing Properties of Metal Powders Used for Additive Manufacturing Processes

    F3049 Standard Guide for Characterizing Properties of Metal Powders Used for Additive Manufacturing Processes

    F3049 Standard Guide for Characterizing Properties of Metal Powders Used for Additive Manufacturing Processes

    F3049 Standard Guide for Characterizing Properties of Metal Powders Used for Additive Manufacturing Processes

    F3049 Standard Guide for Characterizing Properties of Metal Powders Used for Additive Manufacturing Processes


    Referenced ASTM Standards The documents listed below are referenced within the subject standard but are not provided as part of the standard.

    B117 Practice for Operating Salt Spray (Fog) Apparatus

    C99 Test Method for Modulus of Rupture of Dimension Stone

    C119 Terminology Relating to Dimension Stone

    C162 Terminology of Glass and Glass Products

    C503 Specification for Marble Dimension Stone

    C509 Specification for Elastomeric Cellular Preformed Gasket and Sealing Material

    C510 Test Method for Staining and Color Change of Single- or Multicomponent Joint Sealants

    C568 Specification for Limestone Dimension Stone

    C615 Specification for Granite Dimension Stone

    C717 Terminology of Building Seals and Sealants

    C719 Test Method for Adhesion and Cohesion of Elastomeric Joint Sealants Under Cyclic Movement (Hockman Cycle)

    C794 Test Method for Adhesion-in-Peel of Elastomeric Joint Sealants

    C864 Specification for Dense Elastomeric Compression Seal Gaskets, Setting Blocks, and Spacers

    C880 Test Method for Flexural Strength of Dimension Stone

    C920 Specification for Elastomeric Joint Sealants

    C1036 Specification for Flat Glass

    C1048 Specification for Heat-Strengthened and Fully Tempered Flat Glass

    C1087 Test Method for Determining Compatibility of Liquid-Applied Sealants with Accessories Used in Structural Glazing Systems

    C1115 Specification for Dense Elastomeric Silicone Rubber Gaskets and Accessories

    C1135 Test Method for Determining Tensile Adhesion Properties of Structural Sealants

    C1172 Specification for Laminated Architectural Flat Glass

    C1184 Specification for Structural Silicone Sealants

    C1193 Guide for Use of Joint Sealants

    C1201 Test Method for Structural Performance of Exterior Dimension Stone Cladding Systems by Uniform Static Air Pressure Difference

    C1248 Test Method for Staining of Porous Substrate by Joint Sealants

    C1249 Guide for Secondary Seal for Sealed Insulating Glass Units for Structural Sealant Glazing Applications

    C1253 Test Method for Determining the Outgassing Potential of Sealant Backing

    C1265 Test Method for Determining the Tensile Properties of an Insulating Glass Edge Seal for Structural Glazing Applications

    C1294 Test Method for Compatibility of Insulating Glass Edge Sealants with Liquid-Applied Glazing Materials

    C1330 Specification for Cylindrical Sealant Backing for Use with Cold Liquid-Applied Sealants

    C1369 Specification for Secondary Edge Sealants for Structurally Glazed Insulating Glass Units

    C1392 Guide for Evaluating Failure of Structural Sealant Glazing

    C1394 Guide for In-Situ Structural Silicone Glazing Evaluation

    C1472 Guide for Calculating Movement and Other Effects When Establishing Sealant Joint Width

    C1487 Guide for Remedying Structural Silicone Glazing

    C1521 Practice for Evaluating Adhesion of Installed Weatherproofing Sealant Joints

    C1564 Guide for Use of Silicone Sealants for Protective Glazing Systems

    D1566 Terminology Relating to Rubber

    D2203 Test Method for Staining from Sealants

    D4541 Test Method for Pull-Off Strength of Coatings Using Portable Adhesion Testers

    E283 Test Method for Determining Rate of Air Leakage Through Exterior Windows, Curtain Walls, and Doors Under Specified Pressure Differences Across the Specimen

    E330 Test Method for Structural Performance of Exterior Windows, Doors, Skylights and Curtain Walls by Uniform Static Air Pressure Difference

    E331 Test Method for Water Penetration of Exterior Windows, Skylights, Doors, and Curtain Walls by Uniform Static Air Pressure Difference

    E547 Test Method for Water Penetration of Exterior Windows, Skylights, Doors, and Curtain Walls by Cyclic Static Air Pressure Difference

    E631 Terminology of Building Constructions

    E783 Test Method for Field Measurement of Air Leakage Through Installed Exterior Windows and Doors

    E1105 Test Method for Field Determination of Water Penetration of Installed Exterior Windows, Skylights, Doors, and Curtain Walls, by Uniform or Cyclic Static Air Pressure Difference

    E1233 Test Method for Structural Performance of Exterior Windows, Doors, Skylights, and Curtain Walls by Cyclic Air Pressure Differential

    E1300 Practice for Determining Load Resistance of Glass in Buildings

    E1424 Test Method for Determining the Rate of Air Leakage Through Exterior Windows, Curtain Walls, and Doors Under Specified Pressure and Temperature Differences Across the Specimen

    E1425 Practice for Determining the Acoustical Performance of Windows, Doors, Skylight, and Glazed Wall Systems

    E1825 Guide for Evaluation of Exterior Building Wall Materials, Products, and Systems

    E1886 Test Method for Performance of Exterior Windows, Curtain Walls, Doors, and Impact Protective Systems Impacted by Missile(s) and Exposed to Cyclic Pressure Differentials

    E1996 Specification for Performance of Exterior Windows, Curtain Walls, Doors, and Impact Protective Systems Impacted by Windborne Debris in Hurricanes

    E2099 Practice for the Specification and Evaluation of Pre-Construction Laboratory Mockups of Exterior Wall Systems

    E2128 Guide for Evaluating Water Leakage of Building Walls

    E2203 Specification for Dense Thermoplastic Elastomers Used for Compression Seals, Gaskets, Setting Blocks, Spacers and Accessories

    E2431 Practice for Determining the Resistance of Single Glazed Annealed Architectural Flat Glass to Thermal Loadings

    G15 Terminology Relating to Corrosion and Corrosion Testing