ASTM C1363 - 11 Standard Test Method for Thermal Performance of Building Materials and Envelope Assemblies by Means of a Hot Box Apparatus


    Citing ASTM Standards Citation data is made available by participants in CrossRefs Cited-by Linking service. A comprehensive list of citations to this standard are listed here.

    C177 Standard Test Method for Steady-State Heat Flux Measurements and Thermal Transmission Properties by Means of the Guarded-Hot-Plate Apparatus

    C518 Standard Test Method for Steady-State Thermal Transmission Properties by Means of the Heat Flow Meter Apparatus

    C578 Standard Specification for Rigid, Cellular Polystyrene Thermal Insulation

    C591 Standard Specification for Unfaced Preformed Rigid Cellular Polyisocyanurate Thermal Insulation

    C687 Standard Practice for Determination of Thermal Resistance of Loose-Fill Building Insulation

    C726 Standard Specification for Mineral Wool Roof Insulation Board

    C739 Standard Specification for Cellulosic Fiber Loose-Fill Thermal Insulation

    C764 Standard Specification for Mineral Fiber Loose-Fill Thermal Insulation

    C1029 Standard Specification for Spray-Applied Rigid Cellular Polyurethane Thermal Insulation

    C1045 Standard Practice for Calculating Thermal Transmission Properties Under Steady-State Conditions

    C1058/C1058M Standard Practice for Selecting Temperatures for Evaluating and Reporting Thermal Properties of Thermal Insulation

    C1126 Standard Specification for Faced or Unfaced Rigid Cellular Phenolic Thermal Insulation

    C1130 Standard Practice for Calibrating Thin Heat Flux Transducers

    C1149 Standard Specification for Self-Supported Spray Applied Cellulosic Thermal Insulation

    C1199 Standard Test Method for Measuring the Steady-State Thermal Transmittance of Fenestration Systems Using Hot Box Methods

    C1224 Standard Specification for Reflective Insulation for Building Applications

    C1289 Standard Specification for Faced Rigid Cellular Polyisocyanurate Thermal Insulation Board

    C1373/C1373M Standard Practice for Determination of Thermal Resistance of Attic Insulation Systems Under Simulated Winter Conditions

    C1410 Standard Specification for Cellular Melamine Thermal and Sound-Absorbing Insulation

    C1484 Standard Specification for Vacuum Insulation Panels

    C1558 Standard Guide for Development of Standard Data Records for Computerization of Thermal Transmission Test Data for Thermal Insulation

    D7425/D7425M Standard Specification for Spray Polyurethane Foam Used for Roofing Applications

    D7793 Standard Specification for Insulated Vinyl Siding

    E1423 Standard Practice for Determining Steady State Thermal Transmittance of Fenestration Systems

    E2634 Standard Specification for Flat Wall Insulating Concrete Form (ICF) Systems


    Referenced ASTM Standards The documents listed below are referenced within the subject standard but are not provided as part of the standard.

    C168 Terminology Relating to Thermal Insulation

    C177 Test Method for Steady-State Heat Flux Measurements and Thermal Transmission Properties by Means of the Guarded-Hot-Plate Apparatus

    C236 Test Method for Steady-State Thermal Performance of Building Assemblies by Means of a Guarded Hot Box

    C518 Test Method for Steady-State Thermal Transmission Properties by Means of the Heat Flow Meter Apparatus

    C739 Specification for Cellulosic Fiber Loose-Fill Thermal Insulation

    C764 Specification for Mineral Fiber Loose-Fill Thermal Insulation

    C870 Practice for Conditioning of Thermal Insulating Materials

    C976 Test Method for Thermal Performance of Building Assemblies by Means of a Calibrated Hot Box

    C1045 Practice for Calculating Thermal Transmission Properties Under Steady-State Conditions

    C1058 Practice for Selecting Temperatures for Evaluating and Reporting Thermal Properties of Thermal Insulation

    C1130 Practice for Calibrating Thin Heat Flux Transducers

    C1199 Test Method for Measuring the Steady-State Thermal Transmittance of Fenestration Systems Using Hot Box Methods

    C1224 Specification for Reflective Insulation for Building Applications

    C1371 Test Method for Determination of Emittance of Materials Near Room Temperature Using Portable Emissometers

    C1373 Practice for Determination of Thermal Resistance of Attic Insulation Systems Under Simulated Winter Conditions

    E230 Specification and Temperature-Electromotive Force (EMF) Tables for Standardized Thermocouples

    E903 Test Method for Solar Absorptance, Reflectance, and Transmittance of Materials Using Integrating Spheres

    E1423 Practice for Determining Steady State Thermal Transmittance of Fenestration Systems

    E1424 Test Method for Determining the Rate of Air Leakage Through Exterior Windows, Curtain Walls, and Doors Under Specified Pressure and Temperature Differences Across the Specimen