C29/C29M Standard Test Method for Bulk Density ("Unit Weight") and Voids in Aggregate

C128 Standard Test Method for Density, Relative Density (Specific Gravity), and Absorption of Fine Aggregate

C192/C192M Standard Practice for Making and Curing Concrete Test Specimens in the Laboratory

C404 Standard Specification for Aggregates for Masonry Grout

C418 Standard Test Method for Abrasion Resistance of Concrete by Sandblasting

C566 Standard Test Method for Total Evaporable Moisture Content of Aggregate by Drying

C637 Standard Specification for Aggregates for Radiation-Shielding Concrete

C685/C685M Standard Specification for Concrete Made by Volumetric Batching and Continuous Mixing

C778 Standard Specification for Standard Sand

C1077 Standard Practice for Agencies Testing Concrete and Concrete Aggregates for Use in Construction and Criteria for Testing Agency Evaluation

C1260 Standard Test Method for Potential Alkali Reactivity of Aggregates (Mortar-Bar Method)

C1439 Standard Test Methods for Evaluating Polymer Modifiers in Mortar and Concrete

C1567 Standard Test Method for Determining the Potential Alkali-Silica Reactivity of Combinations of Cementitious Materials and Aggregate (Accelerated Mortar-Bar Method)

C1610/C1610M Standard Test Method for Static Segregation of Self-Consolidating Concrete Using Column Technique

C1688/C1688M Standard Test Method for Density and Void Content of Freshly Mixed Pervious Concrete

D698 Standard Test Methods for Laboratory Compaction Characteristics of Soil Using Standard Effort (12 400 ft-lbf/ft³ (600 kN-m/m³))

D854 Standard Test Methods for Specific Gravity of Soil Solids by Water Pycnometer

D1557 Standard Test Methods for Laboratory Compaction Characteristics of Soil Using Modified Effort (56,000 ft-lbf/ft³ (2,700 kN-m/m³))

D1632 Standard Practice for Making and Curing Soil-Cement Compression and Flexure Test Specimens in the Laboratory

D3398 Standard Test Method for Index of Aggregate Particle Shape and Texture

D3744/D3744M Standard Test Method for Aggregate Durability Index

D4215 Standard Specification for Cold-Mixed, Cold-Laid Bituminous Paving Mixtures

D4253 Standard Test Methods for Maximum Index Density and Unit Weight of Soils Using a Vibratory Table

D4254 Standard Test Methods for Minimum Index Density and Unit Weight of Soils and Calculation of Relative Density

D4469 Standard Practice for Calculating Percent Asphalt Absorption by the Aggregate in an Asphalt Pavement Mixture

D4718 Standard Practice for Correction of Unit Weight and Water Content for Soils Containing Oversize Particles

D4914 Standard Test Methods for Density and Unit Weight of Soil and Rock in Place by the Sand Replacement Method in a Test Pit

D4992 Standard Practice for Evaluation of Rock to be Used for Erosion Control

D5030 Standard Test Method for Density of Soil and Rock in Place by the Water Replacement Method in a Test Pit

D5148 Standard Test Method for Centrifuge Kerosine Equivalent

D6270 Standard Practice for Use of Scrap Tires in Civil Engineering Applications

D6473 Standard Test Method for Specific Gravity and Absorption of Rock For Erosion Control

D6932/D6932M Standard Guide for Materials and Construction of Open-Graded Friction Course Plant Mixtures

D6995 Standard Test Method for Determining Field VMA based on the Maximum Specific Gravity of the Mix (Gmm)

D7000 Standard Test Method for Sweep Test of Bituminous Emulsion Surface Treatment Samples

D7064/D7064M Standard Practice for Open-Graded Friction Course (OGFC) Mix Design

D7370 Standard Test Method for Determination of Relative Density and Absorption of Fine, Coarse and Blended Aggregate Using Combined Vacuum Saturation and Rapid Submersion

D7382 Standard Test Methods for Determination of Maximum Dry Unit Weight and Water Content Range for Effective Compaction of Granular Soils Using a Vibrating Hammer

D7564/D7564M Standard Practice for Construction of Asphalt-Rubber Cape Seal

E1465 Standard Practice for Radon Control Options for the Design and Construction of New Low-Rise Residential Buildings