ASTM C109 / C109M - 13 Standard Test Method for Compressive Strength of Hydraulic Cement Mortars (Using 2-in. or [50-mm] Cube Specimens)


    Citing ASTM Standards Citation data is made available by participants in CrossRefs Cited-by Linking service. A comprehensive list of citations to this standard are listed here.

    A1081/A1081M Standard Test Method for Evaluating Bond of Seven-Wire Steel Prestressing Strand

    C10/C10M Standard Specification for Natural Cement

    C87/C87M Standard Test Method for Effect of Organic Impurities in Fine Aggregate on Strength of Mortar

    C91/C91M Standard Specification for Masonry Cement

    C110 Standard Test Methods for Physical Testing of Quicklime, Hydrated Lime, and Limestone

    C141/C141M Standard Specification for Hydrated Hydraulic Lime for Structural Purposes

    C150/C150M Standard Specification for Portland Cement

    C183 Standard Practice for Sampling and the Amount of Testing of Hydraulic Cement

    C185 Standard Test Method for Air Content of Hydraulic Cement Mortar

    C186 Standard Test Method for Heat of Hydration of Hydraulic Cement

    C226 Standard Specification for Air-Entraining Additions for Use in the Manufacture of Air-Entraining Hydraulic Cement

    C227 Standard Test Method for Potential Alkali Reactivity of Cement-Aggregate Combinations (Mortar-Bar Method)

    C265 Standard Test Method for Water-Extractable Sulfate in Hydrated Hydraulic Cement Mortar

    C270 Standard Specification for Mortar for Unit Masonry

    C311/C311M Standard Test Methods for Sampling and Testing Fly Ash or Natural Pozzolans for Use in Portland-Cement Concrete

    C348 Standard Test Method for Flexural Strength of Hydraulic-Cement Mortars

    C349 Standard Test Method for Compressive Strength of Hydraulic-Cement Mortars (Using Portions of Prisms Broken in Flexure)

    C387/C387M Standard Specification for Packaged, Dry, Combined Materials for Concrete and High Strength Mortar

    C452/C452M Standard Test Method for Potential Expansion of Portland-Cement Mortars Exposed to Sulfate

    C465 Standard Specification for Processing Additions for Use in the Manufacture of Hydraulic Cements

    C495/C495M Standard Test Method for Compressive Strength of Lightweight Insulating Concrete

    C510 Standard Test Method for Staining and Color Change of Single- or Multicomponent Joint Sealants

    C563 Standard Test Method for Approximation of Optimum SO3 in Hydraulic Cement Using Compressive Strength

    C593 Standard Specification for Fly Ash and Other Pozzolans for Use With Lime for Soil Stabilization

    C595/C595M Standard Specification for Blended Hydraulic Cements

    C617/C617M Standard Practice for Capping Cylindrical Concrete Specimens

    C688 Standard Specification for Functional Additions for Use in Hydraulic Cements

    C719 Standard Test Method for Adhesion and Cohesion of Elastomeric Joint Sealants Under Cyclic Movement (Hockman Cycle)

    C778 Standard Specification for Standard Sand

    C780 Standard Test Method for Preconstruction and Construction Evaluation of Mortars for Plain and Reinforced Unit Masonry

    C802 Standard Practice for Conducting an Interlaboratory Test Program to Determine the Precision of Test Methods for Construction Materials

    C806 Standard Test Method for Restrained Expansion of Expansive Cement Mortar

    C807 Standard Test Method for Time of Setting of Hydraulic Cement Mortar by Modified Vicat Needle

    C827/C827M Standard Test Method for Change in Height at Early Ages of Cylindrical Specimens of Cementitious Mixtures

    C845/C845M Standard Specification for Expansive Hydraulic Cement

    C882/C882M Standard Test Method for Bond Strength of Epoxy-Resin Systems Used With Concrete By Slant Shear

    C887 Standard Specification for Packaged, Dry, Combined Materials for Surface Bonding Mortar

    C901 Standard Specification for Prefabricated Masonry Panels

    C917 Standard Test Method for Evaluation of Cement Strength Uniformity From a Single Source

    C928/C928M Standard Specification for Packaged, Dry, Rapid-Hardening Cementitious Materials for Concrete Repairs

    C932 Standard Specification for Surface-Applied Bonding Compounds for Exterior Plastering

    C939 Standard Test Method for Flow of Grout for Preplaced-Aggregate Concrete (Flow Cone Method)

    C942 Standard Test Method for Compressive Strength of Grouts for Preplaced-Aggregate Concrete in the Laboratory

    C989/C989M Standard Specification for Slag Cement for Use in Concrete and Mortars

    C1012/C1012M Standard Test Method for Length Change of Hydraulic-Cement Mortars Exposed to a Sulfate Solution

    C1038/C1038M Standard Test Method for Expansion of Hydraulic Cement Mortar Bars Stored in Water

    C1073 Standard Test Method for Hydraulic Activity of Slag Cement by Reaction with Alkali

    C1074 Standard Practice for Estimating Concrete Strength by the Maturity Method

    C1093 Standard Practice for Accreditation of Testing Agencies for Masonry

    C1107/C1107M Standard Specification for Packaged Dry, Hydraulic-Cement Grout (Nonshrink)

    C1148 Standard Test Method for Measuring the Drying Shrinkage of Masonry Mortar

    C1157/C1157M Standard Performance Specification for Hydraulic Cement

    C1194 Standard Test Method for Compressive Strength of Architectural Cast Stone

    C1216/C1216M Standard Test Method for Adhesion and Cohesion of One-Part Elastomeric Solvent Release Sealants

    C1222 Standard Practice for Evaluation of Laboratories Testing Hydraulic Cement

    C1240 Standard Specification for Silica Fume Used in Cementitious Mixtures

    C1247 Standard Test Method for Durability of Sealants Exposed to Continuous Immersion in Liquids

    C1260 Standard Test Method for Potential Alkali Reactivity of Aggregates (Mortar-Bar Method)

    C1328/C1328M Standard Specification for Plastic (Stucco) Cement

    C1329/C1329M Standard Specification for Mortar Cement

    C1403 Standard Test Method for Rate of Water Absorption of Masonry Mortars

    C1437 Standard Test Method for Flow of Hydraulic Cement Mortar

    C1439 Standard Test Methods for Evaluating Latex and Powder Polymer Modifiers for use in Hydraulic Cement Concrete and Mortar

    C1451 Standard Practice for Determining Uniformity of Ingredients of Concrete From a Single Source

    C1506 Standard Test Method for Water Retention of Hydraulic Cement-Based Mortars and Plasters

    C1567 Standard Test Method for Determining the Potential Alkali-Silica Reactivity of Combinations of Cementitious Materials and Aggregate (Accelerated Mortar-Bar Method)

    C1600/C1600M Standard Specification for Rapid Hardening Hydraulic Cement

    C1602/C1602M Standard Specification for Mixing Water Used in the Production of Hydraulic Cement Concrete

    C1707 Standard Specification for Pozzolanic Hydraulic Lime for Structural Purposes

    C1708/C1708M Standard Test Methods for Self-leveling Mortars Containing Hydraulic Cements

    C1709 Standard Guide for Evaluation of Alternative Supplementary Cementitious Materials (ASCM) for Use in Concrete

    C1713 Standard Specification for Mortars for the Repair of Historic Masonry

    D1734 Standard Practice for Making Cementitious Panels for Testing Coatings

    D4796 Standard Test Method for Bond Strength of Thermoplastic Traffic Marking Materials

    D5050 Standard Guide for Commercial Use of Lime Kiln Dusts and Portland Cement Kiln Dusts

    D5239 Standard Practice for Characterizing Fly Ash for Use in Soil Stabilization

    D5759 Standard Guide for Characterization of Coal Fly Ash and Clean Coal Combustion Fly Ash for Potential Uses

    D5860 Standard Test Method for Evaluation of the Effect of Water Repellent Treatments on Freeze-Thaw Resistance of Hydraulic Cement Mortar Specimens

    D6449 Standard Test Method for Flow of Fine Aggregate Concrete for Fabric Formed Concrete (Flow Cone Method)

    D6532 Standard Test Method for Evaluation of the Effect of Clear Water Repellent Treatments on Water Absorption of Hydraulic Cement Mortar Specimens

    E519/E519M Standard Test Method for Diagonal Tension (Shear) in Masonry Assemblages

    E754 Standard Test Method for Pullout Resistance of Ties and Anchors Embedded in Masonry Mortar Joints

    E1266 Standard Practice for Processing Mixtures of Lime, Fly Ash, and Heavy Metal Wastes in Structural Fills and Other Construction Applications

    E2322 Standard Test Method for Conducting Traverse and Concentrated Load Tests on Panels used in Floor and Roof Construction

    F710 Standard Practice for Preparing Concrete Floors to Receive Resilient Flooring

    F1741 Standard Practice for Installation of Machine Spiral Wound Poly (Vinyl Chloride) (PVC) Liner Pipe for Rehabilitation of Existing Sewers and Conduits

    F2551 Standard Practice for Installing a Protective Cementitious Liner System in Sanitary Sewer Manholes

    F2678 Standard Practice for Preparing Panel Underlayments, Thick Poured Gypsum Concrete Underlayments, Thick Poured Lightweight Cellular Concrete Underlayments, and Concrete Subfloors with Underlayment Patching Compounds to Receive Resilient Flooring

    F2718 Standard Specification for Polyethylene (PE) and Cement Materials for an Encapsulated Cement Mortar Formed in Place Liner System (FIPLS) for the Rehabilitation of Water Pipelines

    F2719 Standard Practice for Installation of Polyethylene (PE) and Encapsulated Cement Mortar Formed in Place Lining System (FIPLS) for the Rehabilitation of Water Pipelines

    F2873 Standard Practice for the Installation of Self-Leveling Underlayment and the Preparation of Surface to Receive Resilient Flooring

    F3010 Standard Practice for Two-Component Resin Based Membrane-Forming Moisture Mitigation Systems for Use Under Resilient Floor Coverings


    Referenced ASTM Standards The documents listed below are referenced within the subject standard but are not provided as part of the standard.

    C91 Specification for Masonry Cement

    C114 Test Methods for Chemical Analysis of Hydraulic Cement

    C150 Specification for Portland Cement

    C230/C230M Specification for Flow Table for Use in Tests of Hydraulic Cement

    C305 Practice for Mechanical Mixing of Hydraulic Cement Pastes and Mortars of Plastic Consistency

    C349 Test Method for Compressive Strength of Hydraulic-Cement Mortars (Using Portions of Prisms Broken in Flexure)

    C511 Specification for Mixing Rooms, Moist Cabinets, Moist Rooms, and Water Storage Tanks Used in the Testing of Hydraulic Cements and Concretes

    C595 Specification for Blended Hydraulic Cements

    C618 Specification for Coal Fly Ash and Raw or Calcined Natural Pozzolan for Use in Concrete

    C670 Practice for Preparing Precision and Bias Statements for Test Methods for Construction Materials

    C778 Specification for Sand

    C989 Specification for Slag Cement for Use in Concrete and Mortars

    C1005 Specification for Reference Masses and Devices for Determining Mass and Volume for Use in the Physical Testing of Hydraulic Cements

    C1157 Performance Specification for Hydraulic Cement

    C1328 Specification for Plastic (Stucco) Cement

    C1329 Specification for Mortar Cement

    C1437 Test Method for Flow of Hydraulic Cement Mortar

    E4 Practices for Force Verification of Testing Machines