ASTM C1045 - 07(2013) Standard Practice for Calculating Thermal Transmission Properties Under Steady-State Conditions


    Citing ASTM Standards Citation data is made available by participants in CrossRefs Cited-by Linking service. A comprehensive list of citations to this standard are listed here.

    C177 Standard Test Method for Steady-State Heat Flux Measurements and Thermal Transmission Properties by Means of the Guarded-Hot-Plate Apparatus

    C195 Standard Specification for Mineral Fiber Thermal Insulating Cement

    C209 Standard Test Methods for Cellulosic Fiber Insulating Board

    C335/C335M Standard Test Method for Steady-State Heat Transfer Properties of Pipe Insulation

    C449 Standard Specification for Mineral Fiber Hydraulic-Setting Thermal Insulating and Finishing Cement

    C518 Standard Test Method for Steady-State Thermal Transmission Properties by Means of the Heat Flow Meter Apparatus

    C533 Standard Specification for Calcium Silicate Block and Pipe Thermal Insulation

    C534/C534M Standard Specification for Preformed Flexible Elastomeric Cellular Thermal Insulation in Sheet and Tubular Form

    C547 Standard Specification for Mineral Fiber Pipe Insulation

    C552 Standard Specification for Cellular Glass Thermal Insulation

    C553 Standard Specification for Mineral Fiber Blanket Thermal Insulation for Commercial and Industrial Applications

    C578 Standard Specification for Rigid, Cellular Polystyrene Thermal Insulation

    C591 Standard Specification for Unfaced Preformed Rigid Cellular Polyisocyanurate Thermal Insulation

    C592 Standard Specification for Mineral Fiber Blanket Insulation and Blanket-Type Pipe Insulation (Metal-Mesh Covered) (Industrial Type)

    C610 Standard Specification for Molded Expanded Perlite Block and Pipe Thermal Insulation

    C612 Standard Specification for Mineral Fiber Block and Board Thermal Insulation

    C653 Standard Guide for Determination of the Thermal Resistance of Low-Density Blanket-Type Mineral Fiber Insulation

    C656 Standard Specification for Structural Insulating Board, Calcium Silicate

    C667 Standard Specification for Prefabricated Reflective Insulation Systems for Equipment and Pipe Operating at Temperatures above Ambient Air

    C687 Standard Practice for Determination of Thermal Resistance of Loose-Fill Building Insulation

    C800 Standard Specification for Fibrous Glass Blanket Insulation (Aircraft Type)

    C892 Standard Specification for High-Temperature Fiber Blanket Thermal Insulation

    C1044 Standard Practice for Using a Guarded-Hot-Plate Apparatus or Thin-Heater Apparatus in the Single-Sided Mode

    C1058/C1058M Standard Practice for Selecting Temperatures for Evaluating and Reporting Thermal Properties of Thermal Insulation

    C1086 Standard Specification for Glass Fiber Mechanically Bonded Felt Thermal Insulation

    C1114 Standard Test Method for Steady-State Thermal Transmission Properties by Means of the Thin-Heater Apparatus

    C1126 Standard Specification for Faced or Unfaced Rigid Cellular Phenolic Thermal Insulation

    C1199 Standard Test Method for Measuring the Steady-State Thermal Transmittance of Fenestration Systems Using Hot Box Methods

    C1289 Standard Specification for Faced Rigid Cellular Polyisocyanurate Thermal Insulation Board

    C1290 Standard Specification for Flexible Fibrous Glass Blanket Insulation Used to Externally Insulate HVAC Ducts

    C1303/C1303M Standard Test Method for Predicting Long-Term Thermal Resistance of Closed-Cell Foam Insulation

    C1363 Standard Test Method for Thermal Performance of Building Materials and Envelope Assemblies by Means of a Hot Box Apparatus

    C1373/C1373M Standard Practice for Determination of Thermal Resistance of Attic Insulation Systems Under Simulated Winter Conditions

    C1393 Standard Specification for Perpendicularly Oriented Mineral Fiber Roll and Sheet Thermal Insulation for Pipes and Tanks

    C1410 Standard Specification for Cellular Melamine Thermal and Sound-Absorbing Insulation

    C1427 Standard Specification for Extruded Preformed Flexible Cellular Polyolefin Thermal Insulation in Sheet and Tubular Form

    C1470 Standard Guide for Testing the Thermal Properties of Advanced Ceramics

    C1470 Standard Guide for Testing the Thermal Properties of Advanced Ceramics

    C1482 Standard Specification for Polyimide Flexible Cellular Thermal and Sound Absorbing Insulation

    C1484 Standard Specification for Vacuum Insulation Panels

    C1534 Standard Specification for Flexible Polymeric Foam Sheet Insulation Used as a Thermal and Sound Absorbing Liner for Duct Systems

    C1558 Standard Guide for Development of Standard Data Records for Computerization of Thermal Transmission Test Data for Thermal Insulation

    C1594 Standard Specification for Polyimide Rigid Cellular Thermal Insulation

    C1667 Standard Test Method for Using Heat Flow Meter Apparatus to Measure the Center-of-Panel Thermal Resistivity of Vacuum Panels

    C1668 Standard Specification for Externally Applied Reflective Insulation Systems on Rigid Duct in Heating, Ventilation, and Air Conditioning (HVAC) Systems

    C1676 Standard Specification for Microporous Thermal Insulation

    C1685 Standard Specification for Pneumatically Applied High-Temperature Fiber Thermal Insulation for Industrial Applications

    C1728 Standard Specification for Flexible Aerogel Insulation

    C1774 Standard Guide for Thermal Performance Testing of Cryogenic Insulation Systems

    E1530 Standard Test Method for Evaluating the Resistance to Thermal Transmission of Materials by the Guarded Heat Flow Meter Technique


    Referenced ASTM Standards The documents listed below are referenced within the subject standard but are not provided as part of the standard.

    C168 Terminology Relating to Thermal Insulation

    C177 Test Method for Steady-State Heat Flux Measurements and Thermal Transmission Properties by Means of the Guarded-Hot-Plate Apparatus

    C335 Test Method for Steady-State Heat Transfer Properties of Pipe Insulation

    C518 Test Method for Steady-State Thermal Transmission Properties by Means of the Heat Flow Meter Apparatus

    C680 Practice for Estimate of the Heat Gain or Loss and the Surface Temperatures of Insulated Flat, Cylindrical, and Spherical Systems by Use of Computer Programs

    C1033 Test Method for Steady-State Heat Transfer Properties of Pipe Insulation Installed Vertically

    C1043 Practice for Guarded-Hot-Plate Design Using Circular Line-Heat Sources

    C1044 Practice for Using a Guarded-Hot-Plate Apparatus or Thin-Heater Apparatus in the Single-Sided Mode

    C1058 Practice for Selecting Temperatures for Evaluating and Reporting Thermal Properties of Thermal Insulation

    C1114 Test Method for Steady-State Thermal Transmission Properties by Means of the Thin-Heater Apparatus

    C1199 Test Method for Measuring the Steady-State Thermal Transmittance of Fenestration Systems Using Hot Box Methods

    C1363 Test Method for Thermal Performance of Building Materials and Envelope Assemblies by Means of a Hot Box Apparatus

    E122 Practice for Calculating Sample Size to Estimate, With Specified Precision, the Average for a Characteristic of a Lot or Process