ASTM B846 - 11a Standard Terminology for Copper and Copper Alloys


    Citing ASTM Standards Citation data is made available by participants in CrossRefs Cited-by Linking service. A comprehensive list of citations to this standard are listed here.

    B5 Standard Specification for High Conductivity Tough-Pitch Copper Refinery Shapes

    B19 Standard Specification for Cartridge Brass Sheet, Strip, Plate, Bar, and Disks

    B22/B22M Standard Specification for Bronze Castings for Bridges and Turntables

    B36/B36M Standard Specification for Brass Plate, Sheet, Strip, And Rolled Bar

    B42 Standard Specification for Seamless Copper Pipe, Standard Sizes

    B43 Standard Specification for Seamless Red Brass Pipe, Standard Sizes

    B49 Standard Specification for Copper Rod Drawing Stock for Electrical Purposes

    B61 Standard Specification for Steam or Valve Bronze Castings

    B66 Standard Specification for Bronze Castings for Steam Locomotive Wearing Parts

    B68/B68M Standard Specification for Seamless Copper Tube, Bright Annealed

    B75/B75M Standard Specification for Seamless Copper Tube

    B88M Standard Specification for Seamless Copper Water Tube [Metric]

    B96/B96M Standard Specification for Copper-Silicon Alloy Plate, Sheet, Strip, and Rolled Bar for General Purposes and Pressure Vessels

    B100 Standard Specification for Wrought Copper-Alloy Bearing and Expansion Plates and Sheets for Bridge and Other Structural Use

    B101 Standard Specification for Lead-Coated Copper Sheet and Strip for Building Construction

    B103/B103M Standard Specification for Phosphor Bronze Plate, Sheet, Strip, and Rolled Bar

    B111/B111M Standard Specification for Copper and Copper-Alloy Seamless Condenser Tubes and Ferrule Stock

    B115 Standard Specification for Electrolytic Copper Cathode

    B121/B121M Standard Specification for Leaded Brass Plate, Sheet, Strip, and Rolled Bar

    B122/B122M Standard Specification for Copper-Nickel-Tin Alloy, Copper-Nickel-Zinc Alloy (Nickel Silver), and Copper-Nickel Alloy Plate, Sheet, Strip, and Rolled Bar

    B129 Standard Specification for Cartridge Brass Cartridge Case Cups

    B130 Standard Specification for Commercial Bronze Strip for Bullet Jackets

    B131 Standard Specification for Copper Alloy Bullet Jacket Cups

    B134/B134M Standard Specification for Brass Wire

    B139/B139M Standard Specification for Phosphor Bronze Rod, Bar, and Shapes

    B140/B140M Standard Specification for Copper-Zinc-Lead (Red Brass or Hardware Bronze) Rod, Bar, and Shapes

    B151/B151M Standard Specification for Copper-Nickel-Zinc Alloy (Nickel Silver) and Copper-Nickel Rod and Bar

    B152/B152M Standard Specification for Copper Sheet, Strip, Plate, and Rolled Bar

    B153 Standard Test Method for Expansion (Pin Test) of Copper and Copper-Alloy Pipe and Tubing

    B154 Standard Test Method for Mercurous Nitrate Test for Copper Alloys

    B159/B159M Standard Specification for Phosphor Bronze Wire

    B169/B169M Standard Specification for Aluminum Bronze Sheet, Strip, and Rolled Bar

    B170 Standard Specification for Oxygen-Free Electrolytic Copper—Refinery Shapes

    B171/B171M Standard Specification for Copper-Alloy Plate and Sheet for Pressure Vessels, Condensers, and Heat Exchangers

    B176 Standard Specification for Copper-Alloy Die Castings

    B187/B187M Standard Specification for Copper, Bus Bar, Rod, and Shapes and General Purpose Rod, Bar, and Shapes

    B188 Standard Specification for Seamless Copper Bus Pipe and Tube

    B194 Standard Specification for Copper-Beryllium Alloy Plate, Sheet, Strip, and Rolled Bar

    B196/B196M Standard Specification for Copper-Beryllium Alloy Rod and Bar

    B197/B197M Standard Specification for Copper-Beryllium Alloy Wire

    B206/B206M Standard Specification for Copper-Nickel-Zinc (Nickel Silver) Wire and Copper-Nickel Alloy Wire

    B208 Standard Practice for Preparing Tension Test Specimens for Copper Alloy Sand, Permanent Mold, Centrifugal, and Continuous Castings

    B224 Standard Classification of Coppers

    B248 Standard Specification for General Requirements for Wrought Copper and Copper-Alloy Plate, Sheet, Strip, and Rolled Bar

    B248M Standard Specification for General Requirements for Wrought Copper and Copper-Alloy Plate, Sheet, Strip, and Rolled Bar (Metric)

    B249/B249M Standard Specification for General Requirements for Wrought Copper and Copper-Alloy Rod, Bar, Shapes and Forgings

    B250/B250M Standard Specification for General Requirements for Wrought Copper Alloy Wire

    B271/B271M Standard Specification for Copper-Base Alloy Centrifugal Castings

    B272 Standard Specification for Copper Flat Products with Finished (Rolled or Drawn) Edges (Flat Wire and Strip)

    B283/B283M Standard Specification for Copper and Copper-Alloy Die Forgings (Hot-Pressed)

    B302 Standard Specification for Threadless Copper Pipe, Standard Sizes

    B315 Standard Specification for Seamless Copper Alloy Pipe and Tube

    B359/B359M Standard Specification for Copper and Copper-Alloy Seamless Condenser and Heat Exchanger Tubes With Integral Fins

    B360 Standard Specification for Hard-Drawn Copper Capillary Tube for Restrictor Applications

    B369 Standard Specification for Copper-Nickel Alloy Castings

    B370 Standard Specification for Copper Sheet and Strip for Building Construction

    B372 Standard Specification for Seamless Copper and Copper-Alloy Rectangular Waveguide Tube

    B379 Standard Specification for Phosphorized Coppers—Refinery Shapes

    B395/B395M Standard Specification for U-Bend Seamless Copper and Copper Alloy Heat Exchanger and Condenser Tubes

    B411/B411M Standard Specification for Copper-Nickel-Silicon Alloy Rod and Bar

    B422/B422M Standard Specification for Copper-Aluminum-Silicon-Cobalt Alloy, Copper-Nickel-Silicon-Magnesium Alloy, Copper-Nickel-Silicon Alloy, Copper-Nickel-Aluminum-Magnesium Alloy, and Copper-Nickel-Tin Alloy Sheet and Strip

    B427 Standard Specification for Gear Bronze Alloy Castings

    B428 Standard Test Method for Angle of Twist in Rectangular and Square Copper and Copper Alloy Tube

    B432 Standard Specification for Copper and Copper Alloy Clad Steel Plate

    B441 Standard Specification for Copper-Cobalt-Beryllium, Copper-Nickel-Beryllium, and Copper-Nickel-Lead-Beryllium Rod and Bar (UNS Nos. C17500, C17510, and C17465)

    B447 Standard Specification for Welded Copper Tube

    B455 Standard Specification for Copper-Zinc-Lead Alloy (Leaded-Brass) Extruded Shapes

    B465 Standard Specification for Copper-Iron Alloy Plate, Sheet, Strip, and Rolled Bar

    B466/B466M Standard Specification for Seamless Copper-Nickel Pipe and Tube

    B467 Standard Specification for Welded Copper-Nickel Pipe

    B505/B505M Standard Specification for Copper Alloy Continuous Castings

    B506 Specification for Copper-Clad Stainless Steel Sheet and Strip for Building Construction

    B508 Standard Specification for Copper Alloy Strip for Flexible Metal Hose

    B534 Standard Specification for Copper-Cobalt-Beryllium Alloy and Copper-Nickel-Beryllium Alloy Plate, Sheet, Strip, and Rolled Bar

    B543/B543M Standard Specification for Welded Copper and Copper-Alloy Heat Exchanger Tube

    B552 Standard Specification for Seamless and Welded Copper–Nickel Tubes for Water Desalting Plants

    B569 Standard Specification for Brass Strip in Narrow Widths and Light Gage for Heat-Exchanger Tubing

    B570 Standard Specification for Copper-Beryllium Alloy (UNS Nos. C17000 and C17200) Forgings and Extrusions

    B584 Standard Specification for Copper Alloy Sand Castings for General Applications

    B591 Standard Specification for Copper-Zinc-Tin and Copper-Zinc-Tin-Iron-Nickel Alloys Plate, Sheet, Strip, and Rolled Bar

    B592 Standard Specification for Copper-Zinc-Aluminum-Cobalt Alloy, Copper-Zinc-Tin-Iron Alloy Plate, Sheet, Strip, and Rolled Bar

    B593 Standard Test Method for Bending Fatigue Testing for Copper-Alloy Spring Materials

    B598 Standard Practice for Determining Offset Yield Strength in Tension for Copper Alloys

    B601 Standard Classification for Temper Designations for Copper and Copper Alloys—Wrought and Cast

    B608 Standard Specification for Welded Copper-Alloy Pipe

    B640 Standard Specification for Welded Copper Tube for Air Conditioning and Refrigeration Service

    B643 Standard Specification for Copper-Beryllium Alloy Seamless Tube

    B644 Standard Specification for Copper Alloy Addition Agents

    B687 Standard Specification for Brass, Copper, and Chromium-Plated Pipe Nipples

    B694 Standard Specification for Copper, Copper-Alloy, Copper-Clad Bronze (CCB), Copper-Clad Stainless Steel (CCS), and Copper-Clad Alloy Steel (CAS) Sheet and Strip for Electrical Cable Shielding

    B698 Standard Classification for Seamless Copper and Copper Alloy Plumbing Pipe and Tube

    B706 Standard Specification for Seamless Copper Alloy (UNS No. C69100) Pipe and Tube

    B740 Standard Specification for Copper-Nickel-Tin Spinodal Alloy Strip

    B743 Standard Specification for Seamless Copper Tube in Coils

    B747 Standard Specification for Copper-Zirconium Alloy Sheet and Strip

    B754 Standard Test Method for Measuring and Recording the Deviations from Flatness in Copper and Copper Alloy Strip

    B768 Standard Specification for Copper-Cobalt-Beryllium Alloy and Copper-Nickel-Beryllium Alloy Strip and Sheet

    B770 Standard Specification for Copper-Beryllium Alloy Sand Castings for General Applications

    B813 Standard Specification for Liquid and Paste Fluxes for Soldering of Copper and Copper Alloy Tube

    B819 Standard Specification for Seamless Copper Tube for Medical Gas Systems

    B820 Standard Test Method for Bend Test for Determining the Formability of Copper and Copper Alloy Strip

    B824 Standard Specification for General Requirements for Copper Alloy Castings

    B828 Standard Practice for Making Capillary Joints by Soldering of Copper and Copper Alloy Tube and Fittings

    B837 Standard Specification for Seamless Copper Tube for Natural Gas and Liquefied Petroleum (LP) Gas Fuel Distribution Systems

    B858 Standard Test Method for Ammonia Vapor Test for Determining Susceptibility to Stress Corrosion Cracking in Copper Alloys

    B870 Standard Specification for Copper-Beryllium Alloy Forgings and Extrusions Alloys (UNS Nos. C17500 and C17510)

    B882 Specification for Pre-Patinated Copper for Architectural Applications

    B888/B888M Standard Specification for Copper Alloy Strip for Use in Manufacture of Electrical Connectors or Spring Contacts

    B900 Standard Practice for Packaging of Copper and Copper Alloy Mill Products for U.S. Government Agencies

    B903 Standard Specification for Seamless Copper Heat Exchanger Tubes With Internal Enhancement

    B919 Standard Specification for Welded Copper Heat Exchanger Tubes With Internal Enhancement

    B929 Standard Specification for Copper-Nickel-Tin Spinodal Alloy Rod and Bar

    B936 Standard Specification for Copper-Chromium-Iron-Titanium Alloy Plate, Sheet, Strip and Rolled Bar

    B937 Standard Specification for Copper-Beryllium Seamless Tube (UNS Nos. C17500 and C17510)

    B944 Standard Specification for Copper-Beryllium Welded Heat Exchanger and Condenser Tube (UNS No. C17510)

    B950 Standard Guide for Editorial Procedures and Form of Product Specifications for Copper and Copper Alloys

    B956/B956M Standard Specification for Welded Copper and Copper-Alloy Condenser and Heat Exchanger Tubes with Integral Fins

    B967/B967M Standard Specification for Copper-Zinc-Tin-Bismuth Alloy Rod, Bar and Wire

    B968/B968M Standard Test Method for Flattening of Copper and Copper-Alloy Pipe and Tube

    B974/B974M Standard Specification for Free-Cutting Bismuth Brass Rod, Bar and Wire

    C149 Standard Test Method for Thermal Shock Resistance of Glass Containers

    D4740 Standard Test Method for Cleanliness and Compatibility of Residual Fuels by Spot Test

    D6973 Standard Test Method for Indicating Wear Characteristics of Petroleum Hydraulic Fluids in a High Pressure Constant Volume Vane Pump

    D7095 Standard Test Method for Rapid Determination of Corrosiveness to Copper from Petroleum Products Using a Disposable Copper Foil Strip

    F68 Standard Specification for Oxygen-Free Copper in Wrought Forms for Electron Devices

    F3049 Standard Guide for Characterizing Properties of Metal Powders Used for Additive Manufacturing Processes

    F3049 Standard Guide for Characterizing Properties of Metal Powders Used for Additive Manufacturing Processes

    F3049 Standard Guide for Characterizing Properties of Metal Powders Used for Additive Manufacturing Processes

    F3049 Standard Guide for Characterizing Properties of Metal Powders Used for Additive Manufacturing Processes

    F3049 Standard Guide for Characterizing Properties of Metal Powders Used for Additive Manufacturing Processes

    F3049 Standard Guide for Characterizing Properties of Metal Powders Used for Additive Manufacturing Processes

    F3049 Standard Guide for Characterizing Properties of Metal Powders Used for Additive Manufacturing Processes

    F3049 Standard Guide for Characterizing Properties of Metal Powders Used for Additive Manufacturing Processes

    F3049 Standard Guide for Characterizing Properties of Metal Powders Used for Additive Manufacturing Processes

    F3049 Standard Guide for Characterizing Properties of Metal Powders Used for Additive Manufacturing Processes

    F3049 Standard Guide for Characterizing Properties of Metal Powders Used for Additive Manufacturing Processes

    F3049 Standard Guide for Characterizing Properties of Metal Powders Used for Additive Manufacturing Processes

    F3049 Standard Guide for Characterizing Properties of Metal Powders Used for Additive Manufacturing Processes

    F3049 Standard Guide for Characterizing Properties of Metal Powders Used for Additive Manufacturing Processes

    F3049 Standard Guide for Characterizing Properties of Metal Powders Used for Additive Manufacturing Processes

    F3049 Standard Guide for Characterizing Properties of Metal Powders Used for Additive Manufacturing Processes

    F3049 Standard Guide for Characterizing Properties of Metal Powders Used for Additive Manufacturing Processes

    F3049 Standard Guide for Characterizing Properties of Metal Powders Used for Additive Manufacturing Processes

    F3049 Standard Guide for Characterizing Properties of Metal Powders Used for Additive Manufacturing Processes

    F3049 Standard Guide for Characterizing Properties of Metal Powders Used for Additive Manufacturing Processes

    F3049 Standard Guide for Characterizing Properties of Metal Powders Used for Additive Manufacturing Processes

    F3049 Standard Guide for Characterizing Properties of Metal Powders Used for Additive Manufacturing Processes

    F3049 Standard Guide for Characterizing Properties of Metal Powders Used for Additive Manufacturing Processes

    F3049 Standard Guide for Characterizing Properties of Metal Powders Used for Additive Manufacturing Processes

    F3049 Standard Guide for Characterizing Properties of Metal Powders Used for Additive Manufacturing Processes

    F3049 Standard Guide for Characterizing Properties of Metal Powders Used for Additive Manufacturing Processes


    Referenced ASTM Standards The documents listed below are referenced within the subject standard but are not provided as part of the standard.

    B153 Test Method for Expansion (Pin Test) of Copper and Copper-Alloy Pipe and Tubing

    B170 Specification for Oxygen-Free Electrolytic Copper--Refinery Shapes

    B379 Specification for Phosphorized Coppers--Refinery Shapes

    E8 Test Methods for Tension Testing of Metallic Materials

    E10 Test Method for Brinell Hardness of Metallic Materials

    E18 Test Methods for Rockwell Hardness of Metallic Materials

    E23 Test Methods for Notched Bar Impact Testing of Metallic Materials

    E112 Test Methods for Determining Average Grain Size