ASTM B243 - 13 Standard Terminology of Powder Metallurgy


    Citing ASTM Standards Citation data is made available by participants in CrossRefs Cited-by Linking service. A comprehensive list of citations to this standard are listed here.

    B212 Standard Test Method for Apparent Density of Free-Flowing Metal Powders Using the Hall Flowmeter Funnel

    B213 Standard Test Methods for Flow Rate of Metal Powders Using the Hall Flowmeter Funnel

    B214 Standard Test Method for Sieve Analysis of Metal Powders

    B215 Standard Practices for Sampling Metal Powders

    B276 Standard Test Method for Apparent Porosity in Cemented Carbides

    B311 Standard Test Method for Density of Powder Metallurgy (PM) Materials Containing Less Than Two Percent Porosity

    B312 Standard Test Method for Green Strength of Specimens Compacted from Metal Powders

    B329 Standard Test Method for Apparent Density of Metal Powders and Compounds Using the Scott Volumeter

    B330 Standard Test Methods for Estimating Average Particle Size of Metal Powders and Related Compounds Using Air Permeability

    B331 Standard Test Method for Compressibility of Metal Powders in Uniaxial Compaction

    B417 Standard Test Method for Apparent Density of Non-Free-Flowing Metal Powders Using the Carney Funnel

    B438 Standard Specification for Bronze-Base Powder Metallurgy (PM) Bearings (Oil-Impregnated)

    B439 Standard Specification for Iron-Base Powder Metallurgy (PM) Bearings (Oil-Impregnated)

    B527 Standard Test Method for Determination of Tap Density of Metal Powders and Compounds

    B528 Standard Test Method for Transverse Rupture Strength of Powder Metallurgy (PM) Specimens

    B595 Standard Specification for Sintered Aluminum Structural Parts

    B610 Standard Test Method for Measuring Dimensional Changes Associated with Processing Metal Powders

    B703 Standard Test Method for Apparent Density of Metal Powders and Related Compounds Using the Arnold Meter

    B783 Standard Specification for Materials for Ferrous Powder Metallurgy (PM) Structural Parts

    B795 Standard Test Method for Determining the Percentage of Alloyed or Unalloyed Iron Contamination Present in Powder Forged (PF) Steel Materials

    B821 Standard Guide for Liquid Dispersion of Metal Powders and Related Compounds for Particle Size Analysis

    B822 Standard Test Method for Particle Size Distribution of Metal Powders and Related Compounds by Light Scattering

    B823 Standard Specification for Materials for Copper Base Powder Metallurgy (PM) Structural Parts

    B848 Specification for Powder Forged (P/F) Ferrous Materials

    B853 Standard Specification for Powder Metallurgy (PM) Boron Stainless Steel Structural Components

    B855 Standard Test Method for Volumetric Flow Rate of Metal Powders Using the Arnold Meter and Hall Flowmeter Funnel

    B859 Standard Practice for De-Agglomeration of Refractory Metal Powders and Their Compounds Prior to Particle Size Analysis

    B873 Standard Test Method for Measuring Volume of Apparent Density Cup Used in Test Methods B212, B329, and B417

    B883 Standard Specification for Metal Injection Molding (MIM) Ferrous Materials

    B886 Standard Test Method for Determination of Magnetic Saturation (Ms) of Cemented Carbides

    B887 Standard Test Method for Determination of Coercivity (Hcs) of Cemented Carbides

    B895 Standard Test Methods for Evaluating the Corrosion Resistance of Stainless Steel Powder Metallurgy (PM) Parts/Specimens by Immersion in a Sodium Chloride Solution

    B922 Standard Test Method for Metal Powder Specific Surface Area by Physical Adsorption

    B923 Standard Test Method for Metal Powder Skeletal Density by Helium or Nitrogen Pycnometry

    B925 Standard Practices for Production and Preparation of Powder Metallurgy (PM) Test Specimens

    B930 Standard Test Method for Rating Grain Size and Frequency of Abnormally Large Grains in Cemented Tungsten Carbides (Hardmetals)

    B931 Standard Test Method for Metallographically Estimating the Observed Case Depth of Ferrous Powder Metallurgy (PM) Parts

    B933 Standard Test Method for Microindentation Hardness of Powder Metallurgy (PM) Materials

    B934 Standard Test Method for Effective Case Depth of Ferrous Powder Metallurgy (P/M) Parts Using Microindentation Hardness Measurements

    B939 Standard Test Method for Radial Crushing Strength, K, of Powder Metallurgy (P/M) Bearings and Structural Materials

    B962 Standard Test Methods for Density of Compacted or Sintered Powder Metallurgy (PM) Products Using Archimedes’ Principle

    B963 Standard Test Methods for Oil Content, Oil-Impregnation Efficiency, and Surface-Connected Porosity of Sintered Powder Metallurgy (PM) Products Using Archimedes’ Principle

    B964 Standard Test Methods for Flow Rate of Metal Powders Using the Carney Funnel

    B966 Standard Test Method for Permeability of Powder Metallurgy (PM) Bearings Using Nitrogen Gas

    B970 Standard Test Method for Cleanliness of Powder Metallurgy (PM) Bearings and Structural Parts

    B988 Standard Specification for Powder Metallurgy (PM) Titanium and Titanium Alloy Structural Components

    E159 Standard Test Method for Loss of Mass in Hydrogen for Cobalt, Copper, Tungsten, and Iron Powders (Hydrogen Loss)

    F2885 Standard Specification for Metal Injection Molded Titanium-6Aluminum-4Vanadium Components for Surgical Implant Applications

    F2886 Standard Specification for Metal Injection Molded Cobalt-28Chromium-6Molybdenum Components for Surgical Implant Applications

    F2924 Standard Specification for Additive Manufacturing Titanium-6 Aluminum-4 Vanadium with Powder Bed Fusion

    F2989 Standard Specification for Metal Injection Molded Unalloyed Titanium Components for Surgical Implant Applications

    F3001 Standard Specification for Additive Manufacturing Titanium-6 Aluminum-4 Vanadium ELI (Extra Low Interstitial) with Powder Bed Fusion

    F3055 Standard Specification for Additive Manufacturing Nickel Alloy (UNS N07718) with Powder Bed Fusion

    F3056 Standard Specification for Additive Manufacturing Nickel Alloy (UNS N06625) with Powder Bed Fusion


    Referenced ASTM Standards The documents listed below are referenced within the subject standard but are not provided as part of the standard.

    B331 Test Method for Compressibility of Metal Powders in Uniaxial Compaction