ASTM B117 - 11 Standard Practice for Operating Salt Spray (Fog) Apparatus


    Citing ASTM Standards Citation data is made available by participants in CrossRefs Cited-by Linking service. A comprehensive list of citations to this standard are listed here.

    A755/A755M Standard Specification for Steel Sheet, Metallic Coated by the Hot-Dip Process and Prepainted by the Coil-Coating Process for Exterior Exposed Building Products

    A775/A775M Standard Specification for Epoxy-Coated Steel Reinforcing Bars

    A856/A856M Standard Specification for Zinc-5% Aluminum-Mischmetal Alloy-Coated Carbon Steel Wire

    A882/A882M Standard Specification for Filled Epoxy-Coated Seven-Wire Prestressing Steel Strand

    A933/A933M Standard Specification for Vinyl-Coated Steel Wire and Welded Wire Reinforcement

    A934/A934M Standard Specification for Epoxy-Coated Prefabricated Steel Reinforcing Bars

    A947M Standard Specification for Textured Stainless Steel Sheet [Metric]

    A950/A950M Standard Specification for Fusion-Bonded Epoxy-Coated Structural Steel H-Piles and Sheet Piling

    A967/A967M Standard Specification for Chemical Passivation Treatments for Stainless Steel Parts

    A972/A972M Standard Specification for Fusion Bonded Epoxy-Coated Pipe Piles

    A974 Standard Specification for Welded Wire Fabric Gabions and Gabion Mattresses (Metallic Coated or Polyvinyl Chloride (PVC) Coated)

    A975 Standard Specification for Double–Twisted Hexagonal Mesh Gabions and Revet Mattresses (Metallic-Coated Steel Wire or Metallic-Coated Steel Wire With Poly(Vinyl Chloride) (PVC) Coating)

    A1004/A1004M Standard Practice for Establishing Conformance to the Minimum Expected Corrosion Characteristics of Metallic, Painted-Metallic, and Nonmetallic-Coated Steel Sheet Intended for Use as Cold Formed Framing Members

    A1055/A1055M Standard Specification for Zinc and Epoxy Dual-Coated Steel Reinforcing Bars

    B107/B107M Standard Specification for Magnesium-Alloy Extruded Bars, Rods, Profiles, Tubes, and Wire

    B200 Standard Specification for Electrodeposited Coatings of Lead and Lead-Tin Alloys on Steel and Ferrous Alloys

    B201 Standard Practice for Testing Chromate Coatings on Zinc and Cadmium Surfaces

    B368 Standard Test Method for Copper-Accelerated Acetic Acid-Salt Spray (Fog) Testing (CASS Test)

    B380 Standard Test Method for Corrosion Testing of Decorative Electrodeposited Coatings by the Corrodkote Procedure

    B449 Standard Specification for Chromates on Aluminum

    B537 Standard Practice for Rating of Electroplated Panels Subjected to Atmospheric Exposure

    B580 Standard Specification for Anodic Oxide Coatings on Aluminum

    B633 Standard Specification for Electrodeposited Coatings of Zinc on Iron and Steel

    B635 Standard Specification for Coatings of Cadmium-Tin Mechanically Deposited

    B650 Standard Specification for Electrodeposited Engineering Chromium Coatings on Ferrous Substrates

    B695 Standard Specification for Coatings of Zinc Mechanically Deposited on Iron and Steel

    B696 Standard Specification for Coatings of Cadmium Mechanically Deposited

    B699 Standard Specification for Coatings of Cadmium Vacuum-Deposited on Iron and Steel

    B766 Standard Specification for Electrodeposited Coatings of Cadmium

    B816 Standard Specification for Coatings of Cadmium-Zinc Mechanically Deposited

    B840 Standard Specification for Electrodeposited Coatings for Zinc Cobalt Alloy Deposits

    B841 Standard Specification for Electrodeposited Coatings for Zinc Nickel Alloy Deposits

    B842 Standard Specification for Electrodeposited Coatings for Zinc Iron Alloy Deposits

    B853 Standard Specification for Powder Metallurgy (PM) Boron Stainless Steel Structural Components

    B893 Standard Specification for Hard-Coat Anodizing of Magnesium for Engineering Applications

    B912 Standard Specification for Passivation of Stainless Steels Using Electropolishing

    B921 Standard Specification for Non-hexavalent Chromium Conversion Coatings on Aluminum and Aluminum Alloys

    B940 Standard Practice for Testing Non-Chromate Coatings on Zinc and Cadmium Surfaces

    C635/C635M Standard Specification for the Manufacture, Performance, and Testing of Metal Suspension Systems for Acoustical Tile and Lay-in Panel Ceilings

    C1047 Standard Specification for Accessories for Gypsum Wallboard and Gypsum Veneer Base

    C1401 Standard Guide for Structural Sealant Glazing

    C1503 Standard Specification for Silvered Flat Glass Mirror

    C1513 Standard Specification for Steel Tapping Screws for Cold-Formed Steel Framing Connections

    D333 Standard Guide for Clear and Pigmented Lacquers

    D429 Standard Test Methods for Rubber Property—Adhesion to Rigid Substrates

    D896 Standard Practice for Resistance of Adhesive Bonds to Chemical Reagents

    D1654 Standard Test Method for Evaluation of Painted or Coated Specimens Subjected to Corrosive Environments

    D1735 Standard Practice for Testing Water Resistance of Coatings Using Water Fog Apparatus

    D2059/D2059M Standard Test Method for Resistance of Zippers to Salt Spray (Fog)

    D2485 Standard Test Methods for Evaluating Coatings For High Temperature Service

    D2803 Standard Guide for Testing Filiform Corrosion Resistance of Organic Coatings on Metal

    D3322 Standard Practice for Testing Primers and Primer Surfacers Over Preformed Metal

    D3451 Standard Guide for Testing Coating Powders and Powder Coatings

    D3963/D3963M Standard Specification for Fabrication and Jobsite Handling of Epoxy-Coated Steel Reinforcing Bars

    D5367 Standard Practice for Evaluating Coatings Applied Over Surfaces Treated With Inhibitors Used to Prevent Flash Rusting of Steel When Water or Water/Abrasive Blasted

    D6577 Standard Guide for Testing Industrial Protective Coatings

    D6675 Standard Practice for Salt-Accelerated Outdoor Cosmetic Corrosion Testing of Organic Coatings on Automotive Sheet Steel

    D7087 Standard Test Method for An Imaging Technique to Measure Rust Creepage at Scribe on Coated Test Panels Subjected to Corrosive Environments

    D7270 Standard Guide for Environmental and Performance Verification of Factory-Applied Liquid Coatings

    D7893 Standard Guide for Corrosion Test Panel Preparation, Testing, and Rating of Coil-Coated Building Products

    E865 Standard Specification for Structural Film Adhesives for Honeycomb Sandwich Panels

    E866 Standard Specification for Corrosion-Inhibiting Adhesive Primer for Aluminum Alloys to Be Adhesively Bonded in Honeycomb Shelter Panels

    E1529 Standard Test Methods for Determining Effects of Large Hydrocarbon Pool Fires on Structural Members and Assemblies

    E1826 Standard Specification for Low Volatile Organic Compound (VOC) Corrosion-Inhibiting Adhesive Primer for Aluminum Alloys to Be Adhesively Bonded

    E2136 Standard Guide for Specifying and Evaluating Performance of Single Family Attached and Detached Dwellings—Durability

    E2484 Standard Specification for Multi-Story Building External Evacuation Controlled Descent Devices

    E2568 Standard Specification for PB Exterior Insulation and Finish Systems

    E2952 Standard Specification for Air-Purifying Respiratory Protective Smoke Escape Devices (RPED)

    F381 Standard Safety Specification for Components, Assembly, Use, and Labeling of Consumer Trampolines

    F626 Standard Specification for Fence Fittings

    F852 Standard Specification for Portable Gasoline Containers for Consumer Use

    F883 Standard Performance Specification for Padlocks

    F887 Standard Specifications for Personal Climbing Equipment

    F976 Standard Specification for Portable Kerosene and Diesel Containers for Consumer Use

    F1003 Standard Specification for Searchlights on Motor Lifeboats

    F1075 Standard Specification for Dehumidifier, Shipboard, Mechanically Refrigerated, Self-Contained

    F1136/F1136M Standard Specification for Zinc/Aluminum Corrosion Protective Coatings for Fasteners

    F1137 Standard Specification for Phosphate/Oil Corrosion Protective Coatings for Fasteners

    F1178 Standard Specification for Performance of Enameling System, Baking, Metal Joiner Work and Furniture

    F1271 Standard Specification for Spill Valves for Use in Marine Tank Liquid Overpressure Protections Applications

    F1387 Standard Specification for Performance of Piping and Tubing Mechanically Attached Fittings

    F1428 Standard Specification for Aluminum Particle-Filled Basecoat/Organic or Inorganic Topcoat, Corrosion Protective Coatings for Fasteners

    F1546M Standard Specification for Fire Hose Nozzles

    F1546 Standard Specification for Fire Hose Nozzles

    F1625 Standard Specification and Test Method for Rear-Mounted Bicycle Child Carriers

    F1755M Standard Specification for Solid State Bargraph Meters for Shipboard Use [Metric]

    F1941 Standard Specification for Electrodeposited Coatings on Threaded Fasteners (Unified Inch Screw Threads (UN/UNR))

    F1941M Standard Specification for Electrodeposited Coatings on Threaded Fasteners [Metric]

    F1956 Standard Specification for Rescue Carabiners

    F1975 Standard Specification for Nonpowered Bicycle Trailers Designed for Human Passengers

    F2020 Standard Practice for Design, Construction, and Procurement of Emergency Medical Services Systems (EMSS) Ambulances

    F2363/F2363M Standard Specification for Sewage and Graywater Flow Through Treatment Systems

    F2408 Standard Specification for Ornamental Fences Employing Galvanized Steel Tubular Pickets

    F2412 Standard Test Methods for Foot Protection

    F2413 Standard Specification for Performance Requirements for Protective (Safety) Toe Cap Footwear

    F2453/F2453M Standard Specification for Welded Wire Mesh Fence Fabric (Metallic-Coated or Polymer Coated) for Meshes of 6 in.2? [3871 mm2] or Less, in Panels or Rolls, with Uniform Meshes

    F2501 Standard Practices for Unmanned Aircraft System Airworthiness

    F2548 Standard Specification for Expanded Metal Fence Systems for Security Purposes

    F2589 Standard Specification for Ornamental Fences Employing Steel Tubular Pickets

    F2832 Standard Guide for Accelerated Corrosion Testing for Mechanical Fasteners

    F2833 Standard Specification for Corrosion Protective Fastener Coatings with Zinc Rich Base Coat and Aluminum Organic/Inorganic Type

    F2892 Standard Specification for Performance Requirements for Soft Toe Protective Footwear (Non-Safety / Non-Protective Toe)

    F2917 Standard Specification for Bicycle Trailer Cycles Designed for Human Passengers

    F2919/F2919M Standard Specification for Welded Wire Mesh Fence Fabric (Metallic-Coated or Polymer Coated) with Variable Mesh Patterns or Meshes Greater than 6 in.2 [3871 mm2] in Panels

    F2957 Standard Specification for Ornamental Aluminum Fence Systems

    G85 Standard Practice for Modified Salt Spray (Fog) Testing

    G198 Standard Test Method for Determining the Relative Corrosion Performance of Driven Fasteners in Contact with Treated Wood


    Referenced ASTM Standards The documents listed below are referenced within the subject standard but are not provided as part of the standard.

    B368 Test Method for Copper-Accelerated Acetic Acid-Salt Spray (Fog) Testing (CASS Test)

    D609 Practice for Preparation of Cold-Rolled Steel Panels for Testing Paint, Varnish, Conversion Coatings, and Related Coating Products

    D1193 Specification for Reagent Water

    D1654 Test Method for Evaluation of Painted or Coated Specimens Subjected to Corrosive Environments

    E70 Test Method for pH of Aqueous Solutions With the Glass Electrode

    E691 Practice for Conducting an Interlaboratory Study to Determine the Precision of a Test Method

    G85 Practice for Modified Salt Spray (Fog) Testing