ASTM A788 / A788M - 14a Standard Specification for Steel Forgings, General Requirements


    Citing ASTM Standards Citation data is made available by participants in CrossRefs Cited-by Linking service. A comprehensive list of citations to this standard are listed here.

    A105/A105M Standard Specification for Carbon Steel Forgings for Piping Applications

    A181/A181M Standard Specification for Carbon Steel Forgings, for General-Purpose Piping

    A182/A182M Standard Specification for Forged or Rolled Alloy and Stainless Steel Pipe Flanges, Forged Fittings, and Valves and Parts for High-Temperature Service

    A193/A193M Standard Specification for Alloy-Steel and Stainless Steel Bolting for High Temperature or High Pressure Service and Other Special Purpose Applications

    A266/A266M Standard Specification for Carbon Steel Forgings for Pressure Vessel Components

    A288 Standard Specification for Carbon and Alloy Steel Forgings for Magnetic Retaining Rings for Turbine Generators

    A289/A289M Standard Specification for Alloy Steel Forgings for Nonmagnetic Retaining Rings for Generators

    A290/A290M Standard Specification for Carbon and Alloy Steel Forgings for Rings for Reduction Gears

    A291/A291M Standard Specification for Steel Forgings, Carbon and Alloy, for Pinions, Gears and Shafts for Reduction Gears

    A336/A336M Standard Specification for Alloy Steel Forgings for Pressure and High-Temperature Parts

    A350/A350M Standard Specification for Carbon and Low-Alloy Steel Forgings, Requiring Notch Toughness Testing for Piping Components

    A372/A372M Standard Specification for Carbon and Alloy Steel Forgings for Thin-Walled Pressure Vessels

    A427/A427M Standard Specification for Wrought Alloy Steel Rolls for Cold and Hot Reduction

    A469/A469M Standard Specification for Vacuum-Treated Steel Forgings for Generator Rotors

    A470/A470M Standard Specification for Vacuum-Treated Carbon and Alloy Steel Forgings for Turbine Rotors and Shafts

    A471/A471M Standard Specification for Vacuum-Treated Alloy Steel Forgings for Turbine Rotor Disks and Wheels

    A504/A504M Standard Specification for Wrought Carbon Steel Wheels

    A508/A508M Standard Specification for Quenched and Tempered Vacuum-Treated Carbon and Alloy Steel Forgings for Pressure Vessels

    A521/A521M Standard Specification for Steel, Closed-Impression Die Forgings for General Industrial Use

    A522/A522M Standard Specification for Forged or Rolled 8 and 9% Nickel Alloy Steel Flanges, Fittings, Valves, and Parts for Low-Temperature Service

    A541/A541M Standard Specification for Quenched and Tempered Carbon and Alloy Steel Forgings for Pressure Vessel Components

    A551/A551M Standard Specification for Carbon Steel Tires for Railway and Rapid Transit Applications

    A579/A579M Standard Specification for Superstrength Alloy Steel Forgings

    A592/A592M Standard Specification for High-Strength Quenched and Tempered Low-Alloy Steel Forged Parts for Pressure Vessels

    A646/A646M Standard Specification for Premium Quality Alloy Steel Blooms and Billets for Aircraft and Aerospace Forgings

    A649/A649M Standard Specification for Forged Steel Rolls Used for Corrugating Paper Machinery

    A668/A668M Standard Specification for Steel Forgings, Carbon and Alloy, for General Industrial Use

    A694/A694M Standard Specification for Carbon and Alloy Steel Forgings for Pipe Flanges, Fittings, Valves, and Parts for High-Pressure Transmission Service

    A707/A707M Standard Specification for Forged Carbon and Alloy Steel Flanges for Low-Temperature Service

    A711/A711M Standard Specification for Steel Forging Stock

    A723/A723M Standard Specification for Alloy Steel Forgings for High-Strength Pressure Component Application

    A727/A727M Standard Specification for Carbon Steel Forgings for Piping Components with Inherent Notch Toughness

    A729/A729M Standard Specification for Alloy Steel Axles, Heat-Treated, for Mass Transit and Electric Railway Service

    A765/A765M Standard Specification for Carbon Steel and Low-Alloy Steel Pressure-Vessel-Component Forgings with Mandatory Toughness Requirements

    A768/A768M Standard Specification for Vacuum-Treated 12 % Chromium Alloy Steel Forgings for Turbine Rotors and Shafts

    A836/A836M Standard Specification for Titanium-Stabilized Carbon Steel Forgings for Glass-Lined Piping and Pressure Vessel Service

    A837/A837M Standard Specification for Steel Forgings, Alloy, for Carburizing Applications

    A859/A859M Standard Specification for Age-Hardening Alloy Steel Forgings for Pressure Vessel Components

    A891/A891M Standard Specification for Precipitation Hardening Iron Base Superalloy Forgings for Turbine Rotor Disks and Wheels

    A909/A909M Standard Specification for Steel Forgings, Microalloy, for General Industrial Use

    A921/A921M Standard Specification for Steel Bars, Microalloy, Hot-Wrought, Special Quality, for Subsequent Hot Forging

    A940/A940M Standard Specification for Vacuum Treated Steel Forgings, Alloy, Differentially Heat Treated, for Turbine Rotors

    A962/A962M Standard Specification for Common Requirements for Bolting Intended for Use at Any Temperature from Cryogenic to the Creep Range

    A965/A965M Standard Specification for Steel Forgings, Austenitic, for Pressure and High Temperature Parts

    A982/A982M Standard Specification for Steel Forgings, Stainless, for Compressor and Turbine Airfoils

    A983/A983M Standard Specification for Continuous Grain Flow Forged Carbon and Alloy Steel Crankshafts for Medium Speed Diesel Engines

    A986/A986M Standard Specification for Magnetic Particle Examination of Continuous Grain Flow Crankshaft Forgings

    A1021/A1021M Standard Specification for Martensitic Stainless Steel Forgings and Forging Stock for High-Temperature Service

    A1048/A1048M Standard Specification for Pressure Vessel Forgings, Alloy Steel, Higher Strength Chromium-Molybdenum-Tungsten for Elevated Temperature Service

    A1049/A1049M Standard Specification for Stainless Steel Forgings, Ferritic/Austenitic (Duplex), for Pressure Vessels and Related Components

    A1090/A1090M Standard Specification for Forged Rings and Hollows Produced from Steels with Atmospheric Corrosion Resistance


    Referenced ASTM Standards The documents listed below are referenced within the subject standard but are not provided as part of the standard.

    A266/A266M Specification for Carbon Steel Forgings for Pressure Vessel Components

    A275/A275M Practice for Magnetic Particle Examination of Steel Forgings

    A288 Specification for Carbon and Alloy Steel Forgings for Magnetic Retaining Rings for Turbine Generators

    A289/A289M Specification for Alloy Steel Forgings for Nonmagnetic Retaining Rings for Generators

    A290/A290M Specification for Carbon and Alloy Steel Forgings for Rings for Reduction Gears

    A291/A291M Specification for Steel Forgings, Carbon and Alloy, for Pinions, Gears and Shafts for Reduction Gears

    A336/A336M Specification for Alloy Steel Forgings for Pressure and High-Temperature Parts

    A370 Test Methods and Definitions for Mechanical Testing of Steel Products

    A372/A372M Specification for Carbon and Alloy Steel Forgings for Thin-Walled Pressure Vessels

    A388/A388M Practice for Ultrasonic Examination of Steel Forgings

    A427/A427M Specification for Wrought Alloy Steel Rolls for Cold and Hot Reduction

    A469/A469M Specification for Vacuum-Treated Steel Forgings for Generator Rotors

    A470/A470M Specification for Vacuum-Treated Carbon and Alloy Steel Forgings for Turbine Rotors and Shafts

    A471/A471M Specification for Vacuum-Treated Alloy Steel Forgings for Turbine Rotor Disks and Wheels

    A504/A504M Specification for Wrought Carbon Steel Wheels

    A508/A508M Specification for Quenched and Tempered Vacuum-Treated Carbon and Alloy Steel Forgings for Pressure Vessels

    A521/A521M Specification for Steel, Closed-Impression Die Forgings for General Industrial Use

    A541/A541M Specification for Quenched and Tempered Carbon and Alloy Steel Forgings for Pressure Vessel Components

    A551/A551M Specification for Carbon Steel Tires for Railway and Rapid Transit Applications

    A579/A579M Specification for Superstrength Alloy Steel Forgings

    A592/A592M Specification for High-Strength Quenched and Tempered Low-Alloy Steel Forged Parts for Pressure Vessels

    A646/A646M Specification for Premium Quality Alloy Steel Blooms and Billets for Aircraft and Aerospace Forgings

    A649/A649M Specification for Forged Steel Rolls Used for Corrugating Paper Machinery

    A668/A668M Specification for Steel Forgings, Carbon and Alloy, for General Industrial Use

    A711/A711M Specification for Steel Forging Stock

    A723/A723M Specification for Alloy Steel Forgings for High-Strength Pressure Component Application

    A729/A729M Specification for Alloy Steel Axles, Heat-Treated, for Mass Transit and Electric Railway Service

    A751 Test Methods, Practices, and Terminology for Chemical Analysis of Steel Products

    A765/A765M Specification for Carbon Steel and Low-Alloy Steel Pressure-Vessel-Component Forgings with Mandatory Toughness Requirements

    A768/A768M Specification for Vacuum-Treated 12 % Chromium Alloy Steel Forgings for Turbine Rotors and Shafts

    A833 Practice for Indentation Hardness of Metallic Materials by Comparison Hardness Testers

    A837/A837M Specification for Steel Forgings, Alloy, for Carburizing Applications

    A859/A859M Specification for Age-Hardening Alloy Steel Forgings for Pressure Vessel Components

    A891/A891M Specification for Precipitation Hardening Iron Base Superalloy Forgings for Turbine Rotor Disks and Wheels

    A909/A909M Specification for Steel Forgings, Microalloy, for General Industrial Use

    A939/A939M Practice for Ultrasonic Examination from Bored Surfaces of Cylindrical Forgings

    A940/A940M Specification for Vacuum Treated Steel Forgings, Alloy, Differentially Heat Treated, for Turbine Rotors

    A941 Terminology Relating to Steel, Stainless Steel, Related Alloys, and Ferroalloys

    A965/A965M Specification for Steel Forgings, Austenitic, for Pressure and High Temperature Parts

    A966/A966M Practice for Magnetic Particle Examination of Steel Forgings Using Alternating Current

    A982/A982M Specification for Steel Forgings, Stainless, for Compressor and Turbine Airfoils

    A983/A983M Specification for Continuous Grain Flow Forged Carbon and Alloy Steel Crankshafts for Medium Speed Diesel Engines

    A986/A986M Specification for Magnetic Particle Examination of Continuous Grain Flow Crankshaft Forgings

    A991/A991M Test Method for Conducting Temperature Uniformity Surveys of Furnaces Used to Heat Treat Steel Products

    A1021/A1021M Specification for Martensitic Stainless Steel Forgings and Forging Stock for High-Temperature Service

    A1048/A1048M Specification for Pressure Vessel Forgings, Alloy Steel, Higher Strength Chromium-Molybdenum-Tungsten for Elevated Temperature Service

    A1049/A1049M Specification for Stainless Steel Forgings, Ferritic/Austenitic (Duplex), for Pressure Vessels and Related Components

    A1058 Test Methods for Mechanical Testing of Steel Products--Metric

    E23 Test Methods for Notched Bar Impact Testing of Metallic Materials

    E112 Test Methods for Determining Average Grain Size

    E165/E165M Practice for Liquid Penetrant Examination for General Industry

    E380 Practice for Use of the International System of Units (SI) (the Modernized Metric System)

    E399 Test Method for Linear-Elastic Plane-Strain Fracture Toughness KIc of Metallic Materials

    E428 Practice for Fabrication and Control of Metal, Other than Aluminum, Reference Blocks Used in Ultrasonic Testing

    E1290 Test Method for Crack-Tip Opening Displacement (CTOD) Fracture Toughness Measurement

    E1820 Test Method for Measurement of Fracture Toughness

    E1916 Guide for Identification of Mixed Lots of Metals