ASTM A751 - 14 Standard Test Methods, Practices, and Terminology for Chemical Analysis of Steel Products


    Citing ASTM Standards Citation data is made available by participants in CrossRefs Cited-by Linking service. A comprehensive list of citations to this standard are listed here.

    A6/A6M Standard Specification for General Requirements for Rolled Structural Steel Bars, Plates, Shapes, and Sheet Piling

    A20/A20M Standard Specification for General Requirements for Steel Plates for Pressure Vessels

    A29/A29M Standard Specification for General Requirements for Steel Bars, Carbon and Alloy, Hot-Wrought

    A31 Standard Specification for Steel Rivets and Bars for Rivets, Pressure Vessels

    A53/A53M Standard Specification for Pipe, Steel, Black and Hot-Dipped, Zinc-Coated, Welded and Seamless

    A109/A109M Standard Specification for Steel, Strip, Carbon (0.25 Maximum Percent), Cold-Rolled

    A135/A135M Standard Specification for Electric-Resistance-Welded Steel Pipe

    A139/A139M Standard Specification for Electric-Fusion (Arc)-Welded Steel Pipe (NPS 4 and Over)

    A227/A227M Standard Specification for Steel Wire, Cold-Drawn for Mechanical Springs

    A228/A228M Standard Specification for Steel Wire, Music Spring Quality

    A229/A229M Standard Specification for Steel Wire, Quenched and Tempered for Mechanical Springs

    A230/A230M Standard Specification for Steel Wire, Oil-Tempered Carbon Valve Spring Quality

    A231/A231M Standard Specification for Chromium-Vanadium Alloy Steel Spring Wire

    A232/A232M Standard Specification for Chromium-Vanadium Alloy Steel Valve Spring Quality Wire

    A252 Standard Specification for Welded and Seamless Steel Pipe Piles

    A254/A254M Standard Specification for Copper-Brazed Steel Tubing

    A263 Standard Specification for Stainless Chromium Steel-Clad Plate

    A264 Standard Specification for Stainless Chromium-Nickel Steel-Clad Plate

    A265 Standard Specification for Nickel and Nickel-Base Alloy-Clad Steel Plate

    A276 Standard Specification for Stainless Steel Bars and Shapes

    A295/A295M Standard Specification for High-Carbon Anti-Friction Bearing Steel

    A307 Standard Specification for Carbon Steel Bolts, Studs, and Threaded Rod 60 000 PSI Tensile Strength

    A313/A313M Standard Specification for Stainless Steel Spring Wire

    A314 Standard Specification for Stainless Steel Billets and Bars for Forging

    A325M Standard Specification for Structural Bolts, Steel, Heat Treated 830 MPa Minimum Tensile Strength (Metric)

    A325 Standard Specification for Structural Bolts, Steel, Heat Treated, 120/105 ksi Minimum Tensile Strength

    A354 Standard Specification for Quenched and Tempered Alloy Steel Bolts, Studs, and Other Externally Threaded Fasteners

    A368 Standard Specification for Stainless Steel Wire Strand

    A391/A391M Standard Specification for Grade 80 Alloy Steel Chain

    A401/A401M Standard Specification for Steel Wire, Chromium-Silicon Alloy

    A403/A403M Standard Specification for Wrought Austenitic Stainless Steel Piping Fittings

    A413/A413M Standard Specification for Carbon Steel Chain

    A449 Standard Specification for Hex Cap Screws, Bolts and Studs, Steel, Heat Treated, 120/105/90 ksi Minimum Tensile Strength, General Use

    A450/A450M Standard Specification for General Requirements for Carbon and Low Alloy Steel Tubes

    A467/A467M Standard Specification for Machine and Coil Chain

    A471/A471M Standard Specification for Vacuum-Treated Alloy Steel Forgings for Turbine Rotor Disks and Wheels

    A473 Standard Specification for Stainless Steel Forgings

    A478 Standard Specification for Chromium-Nickel Stainless Steel Weaving and Knitting Wire

    A479/A479M Standard Specification for Stainless Steel Bars and Shapes for Use in Boilers and Other Pressure Vessels

    A480/A480M Standard Specification for General Requirements for Flat-Rolled Stainless and Heat-Resisting Steel Plate, Sheet, and Strip

    A484/A484M Standard Specification for General Requirements for Stainless Steel Bars, Billets, and Forgings

    A485 Standard Specification for High Hardenability Antifriction Bearing Steel

    A489 Standard Specification for Carbon Steel Lifting Eyes

    A490 Standard Specification for Structural Bolts, Alloy Steel, Heat Treated, 150 ksi Minimum Tensile Strength

    A490M Standard Specification for High-Strength Steel Bolts, Classes 10.9 and 10.9.3, for Structural Steel Joints (Metric)

    A492 Standard Specification for Stainless Steel Rope Wire

    A493 Standard Specification for Stainless Steel Wire and Wire Rods for Cold Heading and Cold Forging

    A500/A500M Standard Specification for Cold-Formed Welded and Seamless Carbon Steel Structural Tubing in Rounds and Shapes

    A501 Standard Specification for Hot-Formed Welded and Seamless Carbon Steel Structural Tubing

    A502 Standard Specification for Rivets, Steel, Structural

    A505 Standard Specification for Steel, Sheet and Strip, Alloy, Hot-Rolled and Cold-Rolled, General Requirements for

    A510/A510M Standard Specification for General Requirements for Wire Rods and Coarse Round Wire, Carbon Steel, and Alloy Steel

    A513/A513M Standard Specification for Electric-Resistance-Welded Carbon and Alloy Steel Mechanical Tubing

    A523 Standard Specification for Plain End Seamless and Electric-Resistance-Welded Steel Pipe for High-Pressure Pipe-Type Cable Circuits

    A530/A530M Standard Specification for General Requirements for Specialized Carbon and Alloy Steel Pipe

    A534 Standard Specification for Carburizing Steels for Anti-Friction Bearings

    A554 Standard Specification for Welded Stainless Steel Mechanical Tubing

    A555/A555M Standard Specification for General Requirements for Stainless Steel Wire and Wire Rods

    A563 Standard Specification for Carbon and Alloy Steel Nuts

    A563M Standard Specification for Carbon and Alloy Steel Nuts (Metric)

    A564/A564M Standard Specification for Hot-Rolled and Cold-Finished Age-Hardening Stainless Steel Bars and Shapes

    A565/A565M Standard Specification for Martensitic Stainless Steel Bars for High-Temperature Service

    A568/A568M Standard Specification for Steel, Sheet, Carbon, Structural, and High-Strength, Low-Alloy, Hot-Rolled and Cold-Rolled, General Requirements for

    A574 Standard Specification for Alloy Steel Socket-Head Cap Screws

    A574M Standard Specification for Alloy Steel Socket-Head Cap Screws (Metric)

    A581/A581M Standard Specification for Free-Machining Stainless Steel Wire and Wire Rods

    A582/A582M Standard Specification for Free-Machining Stainless Steel Bars

    A587 Standard Specification for Electric-Resistance-Welded Low-Carbon Steel Pipe for the Chemical Industry

    A589/A589M Standard Specification for Seamless and Welded Carbon Steel Water-Well Pipe

    A595/A595M Standard Specification for Steel Tubes, Low-Carbon or High-Strength Low-Alloy, Tapered for Structural Use

    A597 Standard Specification for Cast Tool Steel

    A615/A615M Standard Specification for Deformed and Plain Carbon-Steel Bars for Concrete Reinforcement

    A618/A618M Standard Specification for Hot-Formed Welded and Seamless High-Strength Low-Alloy Structural Tubing

    A635/A635M Standard Specification for Steel, Sheet and Strip, Heavy-Thickness Coils, Hot-Rolled, Alloy, Carbon, Structural, High-Strength Low-Alloy, and High-Strength Low-Alloy with Improved Formability, General Requirements for

    A638/A638M Standard Specification for Precipitation Hardening Iron Base Superalloy Bars, Forgings, and Forging Stock for High-Temperature Service

    A679/A679M Standard Specification for Steel Wire, High Tensile Strength, Cold Drawn

    A684/A684M Standard Specification for Steel, Strip, High-Carbon, Cold-Rolled

    A703/A703M Standard Specification for Steel Castings, General Requirements, for Pressure-Containing Parts

    A705/A705M Standard Specification for Age-Hardening Stainless Steel Forgings

    A706/A706M Standard Specification for Deformed and Plain Low-Alloy Steel Bars for Concrete Reinforcement

    A749/A749M Standard Specification for Steel, Strip, Carbon and High-Strength, Low-Alloy, Hot-Rolled, General Requirements for

    A756 Standard Specification for Stainless Anti-Friction Bearing Steel

    A761/A761M Standard Specification for Corrugated Steel Structural Plate, Zinc-Coated, for Field-Bolted Pipe, Pipe-Arches, and Arches

    A764 Standard Specification for Metallic Coated Carbon Steel Wire, Coated at Size and Drawn to Size for Mechanical Springs

    A779/A779M Standard Specification for Steel Strand, Seven-Wire, Uncoated, Compacted for Prestressed Concrete

    A781/A781M Standard Specification for Castings, Steel and Alloy, Common Requirements, for General Industrial Use

    A788/A788M Standard Specification for Steel Forgings, General Requirements

    A795/A795M Standard Specification for Black and Hot-Dipped Zinc-Coated (Galvanized) Welded and Seamless Steel Pipe for Fire Protection Use

    A800/A800M Standard Practice for Steel Casting, Austenitic Alloy, Estimating Ferrite Content Thereof

    A805/A805M Standard Specification for Steel, Flat Wire, Carbon, Cold-Rolled

    A813/A813M Standard Specification for Single- or Double-Welded Austenitic Stainless Steel Pipe

    A815/A815M Standard Specification for Wrought Ferritic, Ferritic/Austenitic, and Martensitic Stainless Steel Piping Fittings

    A821/A821M Standard Specification for Steel Wire, Hard-Drawn for Prestressed Concrete Tanks

    A822/A822M Standard Specification for Seamless Cold-Drawn Carbon Steel Tubing for Hydraulic System Service

    A847/A847M Standard Specification for Cold-Formed Welded and Seamless High-Strength, Low-Alloy Structural Tubing with Improved Atmospheric Corrosion Resistance

    A853 Standard Specification for Steel Wire, Carbon, for General Use

    A860/A860M Standard Specification for Wrought High-Strength Ferritic Steel Butt-Welding Fittings

    A866 Standard Specification for Medium Carbon Anti-Friction Bearing Steel

    A877/A877M Standard Specification for Steel Wire, Chromium-Silicon Alloy, Chrome-Silicon-Vanadium Alloy Valve Spring Quality

    A878/A878M Standard Specification for Steel Wire, Modified Chromium Vanadium Valve Spring Quality

    A887 Standard Specification for Borated Stainless Steel Plate, Sheet, and Strip for Nuclear Application

    A895 Standard Specification for Free-Machining Stainless Steel Plate, Sheet, and Strip

    A909/A909M Standard Specification for Steel Forgings, Microalloy, for General Industrial Use

    A924/A924M Standard Specification for General Requirements for Steel Sheet, Metallic-Coated by the Hot-Dip Process

    A947M Standard Specification for Textured Stainless Steel Sheet [Metric]

    A952/A952M Standard Specification for Forged Grade 80 and Grade 100 Steel Lifting Components and Welded Attachment Links

    A955/A955M Standard Specification for Deformed and Plain Stainless-Steel Bars for Concrete Reinforcement

    A957/A957M Standard Specification for Investment Castings, Steel and Alloy, Common Requirements, for General Industrial Use

    A959 Standard Guide for Specifying Harmonized Standard Grade Compositions for Wrought Stainless Steels

    A960/A960M Standard Specification for Common Requirements for Wrought Steel Piping Fittings

    A961/A961M Standard Specification for Common Requirements for Steel Flanges, Forged Fittings, Valves, and Parts for Piping Applications

    A962/A962M Standard Specification for Common Requirements for Bolting Intended for Use at Any Temperature from Cryogenic to the Creep Range

    A968/A968M Standard Specification for Chromium, Chromium-Nickel, and Silicon Alloy Steel Bars and Shapes for Corrosion and Heat-Resisting Service

    A973/A973M Standard Specification for Grade 100 Alloy Steel Chain

    A985/A985M Standard Specification for Steel Investment Castings General Requirements, for Pressure-Containing Parts

    A988/A988M Standard Specification for Hot Isostatically-Pressed Stainless Steel Flanges, Fittings, Valves, and Parts for High Temperature Service

    A989/A989M Standard Specification for Hot Isostatically-Pressed Alloy Steel Flanges, Fittings, Valves, and Parts for High Temperature Service

    A994 Standard Guide for Editorial Procedures and Form of Product Specifications for Steel, Stainless Steel, and Related Alloys

    A996/A996M Standard Specification for Rail-Steel and Axle-Steel Deformed Bars for Concrete Reinforcement

    A999/A999M Standard Specification for General Requirements for Alloy and Stainless Steel Pipe

    A1000/A1000M Standard Specification for Steel Wire, Carbon and Alloy Specialty Spring Quality

    A1005/A1005M Standard Specification for Steel Line Pipe, Black, Plain End, Longitudinal and Helical Seam, Double Submerged-Arc Welded

    A1006/A1006M Standard Specification for Steel Line Pipe, Black, Plain End, Laser Beam Welded

    A1016/A1016M Standard Specification for General Requirements for Ferritic Alloy Steel, Austenitic Alloy Steel, and Stainless Steel Tubes

    A1018/A1018M Standard Specification for Steel, Sheet and Strip, Heavy-Thickness Coils, Hot-Rolled, Carbon, Commercial, Drawing, Structural, High-Strength Low-Alloy, High-Strength Low-Alloy with Improved Formability, and Ultra-High Strength

    A1024/A1024M Standard Specification for Steel Line Pipe, Black, Plain-End, Seamless

    A1035/A1035M Standard Specification for Deformed and Plain, Low-Carbon, Chromium, Steel Bars for Concrete Reinforcement

    A1037/A1037M Standard Specification for Steel Line Pipe, Black, Furnace-Butt-Welded

    A1069/A1069M Standard Specification for Laser-Fused Stainless Steel Bars, Plates, and Shapes

    A1085 Standard Specification for Cold-Formed Welded Carbon Steel Hollow Structural Sections (HSS)

    A1089/A1089M Standard Specification for Highly Loaded Anti-Friction Bearing Steel

    B344 Standard Specification for Drawn or Rolled Nickel-Chromium and Nickel-Chromium-Iron Alloys for Electrical Heating Elements

    B498/B498M Standard Specification for Zinc-Coated (Galvanized) Steel Core Wire for Use in Overhead Electrical Conductors

    B603 Standard Specification for Drawn or Rolled Iron-Chromium-Aluminum Alloys for Electrical Heating Elements

    B606/B606M Standard Specification for High-Strength Zinc-Coated (Galvanized) Steel Core Wire for Aluminum and Aluminum-Alloy Conductors, Steel Reinforced

    B802/B802M Standard Specification for Zinc-5% Aluminum-Mischmetal Alloy-Coated Steel Core Wire for Aluminum Conductors, Steel Reinforced (ACSR)

    B803/B803M Standard Specification for High-Strength Zinc-5% Aluminum-Mischmetal Alloy-Coated Steel Core Wire for Use in Overhead Electrical Conductors

    B957/B957M Standard Specification for Extra-High-Strength and Ultra-High-Strength Zinc-Coated (Galvanized) Steel Core Wire for Overhead Electrical Conductors

    B958/B958M Standard Specification for Extra-High-Strength and Ultra-High-Strength Class A Zinc–5% Aluminum-Mischmetal Alloy-Coated Steel Core Wire for Use in Overhead Electrical Conductors

    E185 Standard Practice for Design of Surveillance Programs for Light-Water Moderated Nuclear Power Reactor Vessels

    E1282 Standard Guide for Specifying the Chemical Compositions and Selecting Sampling Practices and Quantitative Analysis Methods for Metals, Ores, and Related Materials

    E1806 Standard Practice for Sampling Steel and Iron for Determination of Chemical Composition

    F90 Standard Specification for Wrought Cobalt-20Chromium-15Tungsten-10Nickel Alloy for Surgical Implant Applications (UNS R30605)

    F138 Standard Specification for Wrought 18Chromium-14Nickel-2.5Molybdenum Stainless Steel Bar and Wire for Surgical Implants (UNS S31673)

    F139 Standard Specification for Wrought 18Chromium-14Nickel-2.5Molybdenum Stainless Steel Sheet and Strip for Surgical Implants (UNS S31673)

    F432 Standard Specification for Roof and Rock Bolts and Accessories

    F436M Standard Specification for Hardened Steel Washers [Metric]

    F436 Standard Specification for Hardened Steel Washers

    F541 Standard Specification for Alloy Steel Eyebolts

    F561 Standard Practice for Retrieval and Analysis of Medical Devices, and Associated Tissues and Fluids

    F562 Standard Specification for Wrought 35Cobalt-35Nickel-20Chromium-10Molybdenum Alloy for Surgical Implant Applications (UNS R30035)

    F593 Standard Specification for Stainless Steel Bolts, Hex Cap Screws, and Studs

    F594 Standard Specification for Stainless Steel Nuts

    F738M Standard Specification for Stainless Steel Metric Bolts, Screws, and Studs

    F835 Standard Specification for Alloy Steel Socket Button and Flat Countersunk Head Cap Screws

    F835M Standard Specification for Alloy Steel Socket Button and Flat Countersunk Head Cap Screws (Metric)

    F836M Standard Specification for Style 1 Stainless Steel Metric Nuts

    F837 Standard Specification for Stainless Steel Socket Head Cap Screws

    F837M Standard Specification for Stainless Steel Socket Head Cap Screws [Metric]

    F844 Standard Specification for Washers, Steel, Plain (Flat), Unhardened for General Use

    F879 Standard Specification for Stainless Steel Socket Button and Flat Countersunk Head Cap Screws

    F879M Standard Specification for Stainless Steel Socket Button and Flat Countersunk Head Cap Screws (Metric)

    F880M Standard Specification for Stainless Steel Socket Set Screws (Metric)

    F880 Standard Specification for Stainless Steel Socket, Square Head, and Slotted Headless-Set Screws

    F899 Standard Specification for Wrought Stainless Steels for Surgical Instruments

    F912 Standard Specification for Alloy Steel Socket Set Screws

    F912M Standard Specification for Alloy Steel Socket Set Screws (Metric)

    F961 Standard Specification for 35Cobalt-35Nickel-20Chromium-10Molybdenum Alloy Forgings for Surgical Implants (UNS R30035)

    F1058 Standard Specification for Wrought 40Cobalt-20Chromium-16Iron-15Nickel-7Molybdenum Alloy Wire and Strip for Surgical Implant Applications (UNS R30003 and UNS R30008)

    F1314 Standard Specification for Wrought Nitrogen Strengthened 22 Chromium–13 Nickel–5 Manganese–2.5 Molybdenum Stainless Steel Alloy Bar and Wire for Surgical Implants (UNS S20910)

    F1376 Standard Guide for Metallurgical Analysis for Gas Distribution System Components

    F1554 Standard Specification for Anchor Bolts, Steel, 36, 55, and 105-ksi Yield Strength

    F1586 Standard Specification for Wrought Nitrogen Strengthened 21Chromium-10Nickel-3Manganese-2.5Molybdenum Stainless Steel Alloy Bar for Surgical Implants (UNS S31675)

    F1852 Standard Specification for “Twist Off” Type Tension Control Structural Bolt/Nut/Washer Assemblies, Steel, Heat Treated, 120/105 ksi Minimum Tensile Strength

    F2229 Standard Specification for Wrought, Nitrogen Strengthened 23Manganese-21Chromium-1Molybdenum Low-Nickel Stainless Steel Alloy Bar and Wire for Surgical Implants (UNS S29108)

    F2280 Standard Specification for “Twist Off” Type Tension Control Structural Bolt/Nut/Washer Assemblies, Steel, Heat Treated, 150 ksi Minimum Tensile Strength

    F2281 Standard Specification for Stainless Steel and Nickel Alloy Bolts, Hex Cap Screws, and Studs, for Heat Resistance and High Temperature Applications

    F2282 Standard Specification for Quality Assurance Requirements for Carbon and Alloy Steel Wire, Rods, and Bars for Mechanical Fasteners

    F2403 Standard Specification for Inch Series Machine Screws, Carbon Steel, 60 000 psi Tensile Strength

    F2511 Standard Specification for Rollers, Bearing, Needle, Ferrous, Solid

    F2581 Standard Specification for Wrought Nitrogen Strengthened 11Manganese-17Chromium-3Molybdenum Low-Nickel Stainless Steel Alloy Bar and Wire for Surgical Implants (UNS S29225)

    F2882M Standard Specification for Screws, Alloy Steel, Heat Treated, 1170 MPa Minimum Tensile Strength [Metric]

    F2882 Standard Specification for Screws, Alloy Steel, Heat Treated, 170 ksi Minimum Tensile Strength


    Referenced ASTM Standards The documents listed below are referenced within the subject standard but are not provided as part of the standard.

    E29 Practice for Using Significant Digits in Test Data to Determine Conformance with Specifications

    E30 Test Methods for Chemical Analysis of Steel, Cast Iron, Open-Hearth Iron, and Wrought Iron

    E50 Practices for Apparatus, Reagents, and Safety Considerations for Chemical Analysis of Metals, Ores, and Related Materials

    E60 Practice for Analysis of Metals, Ores, and Related Materials by Spectrophotometry

    E212 Test Method for Spectrographic Analysis of Carbon and Low-Alloy Steel by the Rod-to-Rod Technique

    E293 Test Method for Spectographic Determination of Acid-Soluble Aluminum in Low-Alloy Steel by the Solution Technique

    E322 Test Method for X-Ray Emission Spectrometric Analysis of Low-Alloy Steels and Cast Irons

    E327 Test Method for Optical Emission Spectrometric Analysis of Stainless Type 18-8 Steels by the Point-to-Plane Technique

    E350 Test Methods for Chemical Analysis of Carbon Steel, Low-Alloy Steel, Silicon Electrical Steel, Ingot Iron, and Wrought Iron

    E352 Test Methods for Chemical Analysis of Tool Steels and Other Similar Medium- and High-Alloy Steels

    E353 Test Methods for Chemical Analysis of Stainless, Heat-Resisting, Maraging, and Other Similar Chromium-Nickel-Iron Alloys

    E354 Test Methods for Chemical Analysis of High-Temperature, Electrical, Magnetic, and Other Similar Iron, Nickel, and Cobalt Alloys

    E404 Test Method for Spectrographic Determination of Boron In Carbon and LowAlloy Steel by the Point-To-Plane Technique

    E415 Test Method for Atomic Emission Vacuum Spectrometric Analysis of Carbon and Low-Alloy Steel

    E421 Test Method for Spectrographic Determination of Silicon and Aluminum in High-Purity Iron

    E485 Test Method for Optical Emission Vacuum Spectrometric Analysis of Blast Furnace Iron by the Point-to-Plane Technique

    E548 Guide for General Criteria Used for Evaluating Laboratory Competence

    E572 Test Method for Analysis of Stainless and Alloy Steels by X-ray Fluorescence Spectrometry

    E663 Practice for Flame Atomic Absorption Analysis

    E743 Guide for Spectrochemical Laboratory Quality Assurance

    E851 Practice for Evaluation of Spectrochemical Laboratories

    E882 Guide for Accountability and Quality Control in the Chemical Analysis Laboratory

    E1019 Test Methods for Determination of Carbon, Sulfur, Nitrogen, and Oxygen in Steel, Iron, Nickel, and Cobalt Alloys by Various Combustion and Fusion Techniques

    E1024 Guide for Chemical Analysis of Metals and Metal Bearing Ores by Flame Atomic Absorption Spectrophotometry

    E1063 Test Method for X-Ray Emission Spectrometric Determination of Cerium and Lanthanum in Carbon and Low-Alloy Steels

    E1085 Test Method for Analysis of Low-Alloy Steels by X-Ray Fluorescence Spectrometry

    E1086 Test Method for Atomic Emission Vacuum Spectrometric Analysis of Stainless Steel by Point-to-Plane Excitation Technique

    E1097 Guide for Determination of Various Elements by Direct Current Plasma Atomic Emission Spectrometry

    E1184 Practice for Determination of Elements by Graphite Furnace Atomic Absorption Spectrometry

    E1282 Guide for Specifying the Chemical Compositions and Selecting Sampling Practices and Quantitative Analysis Methods for Metals, Ores, and Related Materials

    E1329 Practice for Verification and Use of Control Charts in Spectrochemical Analysis

    E1806 Practice for Sampling Steel and Iron for Determination of Chemical Composition