ASTM A700 - 14 Standard Guide for Packaging, Marking, and Loading Methods for Steel Products for Shipment


    Citing ASTM Standards Citation data is made available by participants in CrossRefs Cited-by Linking service. A comprehensive list of citations to this standard are listed here.

    A1 Standard Specification for Carbon Steel Tee Rails

    A2 Standard Specification for Carbon Steel Girder Rails of Plain, Grooved, and Guard Types

    A3 Standard Specification for Steel Joint Bars, Low, Medium, and High Carbon (Non-Heat-Treated)

    A6/A6M Standard Specification for General Requirements for Rolled Structural Steel Bars, Plates, Shapes, and Sheet Piling

    A20/A20M Standard Specification for General Requirements for Steel Plates for Pressure Vessels

    A29/A29M Standard Specification for General Requirements for Steel Bars, Carbon and Alloy, Hot-Wrought

    A49 Standard Specification for Heat-Treated Carbon Steel Joint Bars, Microalloyed Joint Bars, and Forged Carbon Steel Compromise Joint Bars

    A53/A53M Standard Specification for Pipe, Steel, Black and Hot-Dipped, Zinc-Coated, Welded and Seamless

    A65 Standard Specification for Steel Track Spikes

    A66 Standard Specification for Steel Screw Spikes

    A67 Standard Specification for Steel Tie Plates, Low-Carbon and High-Carbon Hot-Worked

    A109/A109M Standard Specification for Steel, Strip, Carbon (0.25 Maximum Percent), Cold-Rolled

    A116 Standard Specification for Metallic-Coated, Steel Woven Wire Fence Fabric

    A121 Standard Specification for Metallic-Coated Carbon Steel Barbed Wire

    A135/A135M Standard Specification for Electric-Resistance-Welded Steel Pipe

    A183 Standard Specification for Carbon Steel Track Bolts and Nuts

    A184/A184M Standard Specification for Welded Deformed Steel Bar Mats for Concrete Reinforcement

    A227/A227M Standard Specification for Steel Wire, Cold-Drawn for Mechanical Springs

    A228/A228M Standard Specification for Steel Wire, Music Spring Quality

    A229/A229M Standard Specification for Steel Wire, Quenched and Tempered for Mechanical Springs

    A230/A230M Standard Specification for Steel Wire, Oil-Tempered Carbon Valve Spring Quality

    A231/A231M Standard Specification for Chromium-Vanadium Alloy Steel Spring Wire

    A232/A232M Standard Specification for Chromium-Vanadium Alloy Steel Valve Spring Quality Wire

    A345 Standard Specification for Flat-Rolled Electrical Steels for Magnetic Applications

    A390 Standard Specification for Zinc-Coated (Galvanized) Steel Poultry Fence Fabric (Hexagonal and Straight Line)

    A392 Standard Specification for Zinc-Coated Steel Chain-Link Fence Fabric

    A401/A401M Standard Specification for Steel Wire, Chromium-Silicon Alloy

    A407 Standard Specification for Steel Wire, Cold-Drawn, for Coiled-Type Springs

    A450/A450M Standard Specification for General Requirements for Carbon and Low Alloy Steel Tubes

    A480/A480M Standard Specification for General Requirements for Flat-Rolled Stainless and Heat-Resisting Steel Plate, Sheet, and Strip

    A484/A484M Standard Specification for General Requirements for Stainless Steel Bars, Billets, and Forgings

    A491 Standard Specification for Aluminum-Coated Steel Chain-Link Fence Fabric

    A500/A500M Standard Specification for Cold-Formed Welded and Seamless Carbon Steel Structural Tubing in Rounds and Shapes

    A505 Standard Specification for Steel, Sheet and Strip, Alloy, Hot-Rolled and Cold-Rolled, General Requirements for

    A510/A510M Standard Specification for General Requirements for Wire Rods and Coarse Round Wire, Carbon Steel, and Alloy Steel

    A513/A513M Standard Specification for Electric-Resistance-Welded Carbon and Alloy Steel Mechanical Tubing

    A530/A530M Standard Specification for General Requirements for Specialized Carbon and Alloy Steel Pipe

    A555/A555M Standard Specification for General Requirements for Stainless Steel Wire and Wire Rods

    A568/A568M Standard Specification for Steel, Sheet, Carbon, Structural, and High-Strength, Low-Alloy, Hot-Rolled and Cold-Rolled, General Requirements for

    A599/A599M Standard Specification for Tin Mill Products, Electrolytic Tin-Coated, Cold-Rolled Sheet

    A600 Standard Specification for Tool Steel High Speed

    A615/A615M Standard Specification for Deformed and Plain Carbon-Steel Bars for Concrete Reinforcement

    A618/A618M Standard Specification for Hot-Formed Welded and Seamless High-Strength Low-Alloy Structural Tubing

    A623 Standard Specification for Tin Mill Products, General Requirements

    A623M Standard Specification for Tin Mill Products, General Requirements [Metric]

    A635/A635M Standard Specification for Steel, Sheet and Strip, Heavy-Thickness Coils, Hot-Rolled, Alloy, Carbon, Structural, High-Strength Low-Alloy, and High-Strength Low-Alloy with Improved Formability, General Requirements for

    A641/A641M Standard Specification for Zinc–Coated (Galvanized) Carbon Steel Wire

    A648 Standard Specification for Steel Wire, Hard-Drawn for Prestressed Concrete Pipe

    A657/A657M Standard Specification for Tin Mill Products, Black Plate Electrolytic Chromium-Coated, Single and Double Reduced

    A677 Standard Specification for Nonoriented Electrical Steel Fully Processed Types

    A679/A679M Standard Specification for Steel Wire, High Tensile Strength, Cold Drawn

    A681 Standard Specification for Tool Steels Alloy

    A683 Standard Specification for Nonoriented Electrical Steel, Semiprocessed Types

    A684/A684M Standard Specification for Steel, Strip, High-Carbon, Cold-Rolled

    A686 Standard Specification for Tool Steel, Carbon

    A702 Standard Specification for Steel Fence Posts, Hot Wrought

    A704/A704M Standard Specification for Welded Steel Plain Bar or Rod Mats for Concrete Reinforcement

    A706/A706M Standard Specification for Deformed and Plain Low-Alloy Steel Bars for Concrete Reinforcement

    A713 Standard Specification for Steel Wire, High-Carbon Spring, for Heat-Treated Components

    A722/A722M Standard Specification for Uncoated High-Strength Steel Bars for Prestressing Concrete

    A726 Standard Specification for Cold-Rolled Magnetic Lamination Quality Steel, Semiprocessed Types

    A749/A749M Standard Specification for Steel, Strip, Carbon and High-Strength, Low-Alloy, Hot-Rolled, General Requirements for

    A759 Standard Specification for Carbon Steel Crane Rails

    A764 Standard Specification for Metallic Coated Carbon Steel Wire, Coated at Size and Drawn to Size for Mechanical Springs

    A769/A769M Standard Specification for Carbon and High-Strength Electric Resistance Forge-Welded Steel Structural Shapes

    A778 Standard Specification for Welded, Unannealed Austenitic Stainless Steel Tubular Products

    A793 Standard Specification for Rolled Floor Plate, Stainless Steel

    A795/A795M Standard Specification for Black and Hot-Dipped Zinc-Coated (Galvanized) Welded and Seamless Steel Pipe for Fire Protection Use

    A809 Standard Specification for Aluminum-Coated (Aluminized) Carbon Steel Wire

    A817 Standard Specification for Metallic-Coated Steel Wire for Chain-Link Fence Fabric and Marcelled Tension Wire

    A818 Standard Specification for Coppered Carbon Steel Wire

    A820/A820M Standard Specification for Steel Fibers for Fiber-Reinforced Concrete

    A821/A821M Standard Specification for Steel Wire, Hard-Drawn for Prestressed Concrete Tanks

    A824 Standard Specification for Metallic-Coated Steel Marcelled Tension Wire for Use With Chain Link Fence

    A847/A847M Standard Specification for Cold-Formed Welded and Seamless High-Strength, Low-Alloy Structural Tubing with Improved Atmospheric Corrosion Resistance

    A853 Standard Specification for Steel Wire, Carbon, for General Use

    A854/A854M Standard Specification for Metallic-Coated Steel Smooth High-Tensile Fence and Trellis Wire

    A856/A856M Standard Specification for Zinc-5 % Aluminum-Mischmetal Alloy-Coated Carbon Steel Wire

    A865/A865M Standard Specification for Threaded Couplings, Steel, Black or Zinc-Coated (Galvanized) Welded or Seamless, for Use in Steel Pipe Joints

    A876 Standard Specification for Flat-Rolled, Grain-Oriented, Silicon-Iron, Electrical Steel, Fully Processed Types

    A877/A877M Standard Specification for Steel Wire, Chromium-Silicon Alloy, Chrome-Silicon-Vanadium Alloy Valve Spring Quality

    A878/A878M Standard Specification for Steel Wire, Modified Chromium Vanadium Valve Spring Quality

    A881/A881M Standard Specification for Steel Wire, Indented, Low-Relaxation for Prestressed Concrete Railroad Ties

    A901 Standard Specification for Amorphous Magnetic Core Alloys, Semi-Processed Types

    A905 Standard Specification for Steel Wire, Pressure Vessel Winding

    A924/A924M Standard Specification for General Requirements for Steel Sheet, Metallic-Coated by the Hot-Dip Process

    A945/A945M Standard Specification for High-Strength Low-Alloy Structural Steel Plate with Low Carbon and Restricted Sulfur for Improved Weldability, Formability, and Toughness

    A947M Standard Specification for Textured Stainless Steel Sheet [Metric]

    A955/A955M Standard Specification for Deformed and Plain Stainless-Steel Bars for Concrete Reinforcement

    A960/A960M Standard Specification for Common Requirements for Wrought Steel Piping Fittings

    A961/A961M Standard Specification for Common Requirements for Steel Flanges, Forged Fittings, Valves, and Parts for Piping Applications

    A962/A962M Standard Specification for Common Requirements for Bolting Intended for Use at Any Temperature from Cryogenic to the Creep Range

    A970/A970M Standard Specification for Headed Steel Bars for Concrete Reinforcement

    A994 Standard Guide for Editorial Procedures and Form of Product Specifications for Steel, Stainless Steel, and Related Alloys

    A996/A996M Standard Specification for Rail-Steel and Axle-Steel Deformed Bars for Concrete Reinforcement

    A999/A999M Standard Specification for General Requirements for Alloy and Stainless Steel Pipe

    A1000/A1000M Standard Specification for Steel Wire, Carbon and Alloy Specialty Spring Quality

    A1016/A1016M Standard Specification for General Requirements for Ferritic Alloy Steel, Austenitic Alloy Steel, and Stainless Steel Tubes

    A1022/A1022M Standard Specification for Deformed and Plain Stainless Steel Wire and Welded Wire for Concrete Reinforcement

    A1028 Standard Specification for Stainless Steel Bars for Compressor and Turbine Airfoils

    A1035/A1035M Standard Specification for Deformed and Plain, Low-Carbon, Chromium, Steel Bars for Concrete Reinforcement

    A1059/A1059M Standard Specification for Zinc Alloy Thermo-Diffusion Coatings (TDC) on Steel Fasteners, Hardware, and Other Products

    A1060/A1060M Standard Specification for Zinc-Coated (Galvanized) Steel Welded Wire Reinforcement, Plain and Deformed, for Concrete

    A1064/A1064M Standard Specification for Carbon-Steel Wire and Welded Wire Reinforcement, Plain and Deformed, for Concrete

    A1065/A1065M Standard Specification for Cold-Formed Electric-Fusion (Arc) Welded High-Strength Low–Alloy Structural Tubing in Shapes, with 50 ksi [345 MPa] Minimum Yield Point

    A1069/A1069M Standard Specification for Laser-Fused Stainless Steel Bars, Plates, and Shapes

    A1085 Standard Specification for Cold-Formed Welded Carbon Steel Hollow Structural Sections (HSS)

    A1086 Standard Specification for Thin-Gauge Nonoriented Electrical Steel Fully Processed Types

    F547 Standard Terminology of Nails for Use with Wood and Wood-Base Materials

    F1083 Standard Specification for Pipe, Steel, Hot-Dipped Zinc-Coated (Galvanized) Welded, for Fence Structures

    F1183 Standard Specification for Aluminum Alloy Chain Link Fence Fabric

    F1267 Standard Specification for Metal, Expanded, Steel

    F1345 Standard Specification for Zinc-5 % Aluminum-Mischmetal Alloy-Coated Steel Chain-Link Fence Fabric

    F1665 Standard Specification for Poly(Vinyl Chloride) (PVC) and Other Conforming Organic Polymer-Coated Steel Barbed Wire Used With Chain-Link Fence

    F2000 Standard Guide for Fences for Baseball and Softball Fields

    F2282 Standard Specification for Quality Assurance Requirements for Carbon and Alloy Steel Wire, Rods, and Bars for Mechanical Fasteners


    Referenced ASTM Standards The documents listed below are referenced within the subject standard but are not provided as part of the standard.

    D245 Practice for Establishing Structural Grades and Related Allowable Properties for Visually Graded Lumber

    D774/D774M Test Method for Bursting Strength of Paper

    D828 Test Method for Tensile Properties of Paper and Paperboard Using Constant-Rate-of-Elongation Apparatus

    D2555 Practice for Establishing Clear Wood Strength Values

    D3953 Specification for Strapping, Flat Steel and Seals