ASTM A484 / A484M - 14a Standard Specification for General Requirements for Stainless Steel Bars, Billets, and Forgings


    Citing ASTM Standards Citation data is made available by participants in CrossRefs Cited-by Linking service. A comprehensive list of citations to this standard are listed here.

    A182/A182M Standard Specification for Forged or Rolled Alloy and Stainless Steel Pipe Flanges, Forged Fittings, and Valves and Parts for High-Temperature Service

    A276 Standard Specification for Stainless Steel Bars and Shapes

    A314 Standard Specification for Stainless Steel Billets and Bars for Forging

    A473 Standard Specification for Stainless Steel Forgings

    A479/A479M Standard Specification for Stainless Steel Bars and Shapes for Use in Boilers and Other Pressure Vessels

    A555/A555M Standard Specification for General Requirements for Stainless Steel Wire and Wire Rods

    A564/A564M Standard Specification for Hot-Rolled and Cold-Finished Age-Hardening Stainless Steel Bars and Shapes

    A565/A565M Standard Specification for Martensitic Stainless Steel Bars for High-Temperature Service

    A582/A582M Standard Specification for Free-Machining Stainless Steel Bars

    A638/A638M Standard Specification for Precipitation Hardening Iron Base Superalloy Bars, Forgings, and Forging Stock for High-Temperature Service

    A666 Standard Specification for Annealed or Cold-Worked Austenitic Stainless Steel Sheet, Strip, Plate, and Flat Bar

    A705/A705M Standard Specification for Age-Hardening Stainless Steel Forgings

    A753 Standard Specification for Wrought Nickel-Iron Soft Magnetic Alloys (UNS K94490, K94840, N14076, N14080)

    A756 Standard Specification for Stainless Anti-Friction Bearing Steel

    A962/A962M Standard Specification for Common Requirements for Bolting Intended for Use at Any Temperature from Cryogenic to the Creep Range

    A968/A968M Standard Specification for Chromium, Chromium-Nickel, and Silicon Alloy Steel Bars and Shapes for Corrosion and Heat-Resisting Service

    A1028 Standard Specification for Stainless Steel Bars for Compressor and Turbine Airfoils

    A1069/A1069M Standard Specification for Laser-Fused Stainless Steel Bars, Plates, and Shapes

    B649 Standard Specification for Ni-Fe-Cr-Mo-Cu-N Low-Carbon Alloys (UNS N08925, UNS N08031, UNS N08354, and UNS N08926), and Cr-Ni-Fe-N Low-Carbon Alloy (UNS R20033) Bar and Wire, and Ni-Cr-Fe-Mo-N Alloy (UNS N08936) Wire

    F138 Standard Specification for Wrought 18Chromium-14Nickel-2.5Molybdenum Stainless Steel Bar and Wire for Surgical Implants (UNS S31673)

    F593 Standard Specification for Stainless Steel Bolts, Hex Cap Screws, and Studs

    F738M Standard Specification for Stainless Steel Metric Bolts, Screws, and Studs

    F899 Standard Specification for Wrought Stainless Steels for Surgical Instruments

    F1314 Standard Specification for Wrought Nitrogen Strengthened 22 Chromium–13 Nickel–5 Manganese–2.5 Molybdenum Stainless Steel Alloy Bar and Wire for Surgical Implants (UNS S20910)

    F1376 Standard Guide for Metallurgical Analysis for Gas Distribution System Components

    F1586 Standard Specification for Wrought Nitrogen Strengthened 21Chromium-10Nickel-3Manganese-2.5Molybdenum Stainless Steel Alloy Bar for Surgical Implants (UNS S31675)

    F2229 Standard Specification for Wrought, Nitrogen Strengthened 23Manganese-21Chromium-1Molybdenum Low-Nickel Stainless Steel Alloy Bar and Wire for Surgical Implants (UNS S29108)

    F2281 Standard Specification for Stainless Steel and Nickel Alloy Bolts, Hex Cap Screws, and Studs, for Heat Resistance and High Temperature Applications

    F2581 Standard Specification for Wrought Nitrogen Strengthened 11Manganese-17Chromium-3Molybdenum Low-Nickel Stainless Steel Alloy Bar and Wire for Surgical Implants (UNS S29225)


    Referenced ASTM Standards The documents listed below are referenced within the subject standard but are not provided as part of the standard.

    A262 Practices for Detecting Susceptibility to Intergranular Attack in Austenitic Stainless Steels

    A276 Specification for Stainless Steel Bars and Shapes

    A314 Specification for Stainless Steel Billets and Bars for Forging

    A370 Test Methods and Definitions for Mechanical Testing of Steel Products

    A458 Specification for Hot-Worked, Hot-Cold-Worked, and Cold-Worked Alloy Steel Bars for High Strength at Elevated Temperatures

    A473 Specification for Stainless Steel Forgings

    A477 Specification for Hot-Worked, Hot-Cold Worked and Cold-Worked Alloy Steel Forgings and Forging Billets for High Strength at Elevated Temperatures

    A479/A479M Specification for Stainless Steel Bars and Shapes for Use in Boilers and Other Pressure Vessels

    A480/A480M Specification for General Requirements for Flat-Rolled Stainless and Heat-Resisting Steel Plate, Sheet, and Strip

    A555/A555M Specification for General Requirements for Stainless Steel Wire and Wire Rods

    A564/A564M Specification for Hot-Rolled and Cold-Finished Age-Hardening Stainless Steel Bars and Shapes

    A565/A565M Specification for Martensitic Stainless Steel Bars for High-Temperature Service

    A582/A582M Specification for Free-Machining Stainless Steel Bars

    A638/A638M Specification for Precipitation Hardening Iron Base Superalloy Bars, Forgings, and Forging Stock for High-Temperature Service

    A700 Practices for Packaging, Marking, and Loading Methods for Steel Products for Shipment

    A705/A705M Specification for Age-Hardening Stainless Steel Forgings

    A751 Test Methods, Practices, and Terminology for Chemical Analysis of Steel Products

    A831/A831M Specification for Austenitic and Martensitic Stainless Steel Bars, Billets, and Forgings for Liquid Metal Cooled Reactor Core Components

    E112 Test Methods for Determining Average Grain Size

    E139 Test Methods for Conducting Creep, Creep-Rupture, and Stress-Rupture Tests of Metallic Materials