ASTM A370 - 14 Standard Test Methods and Definitions for Mechanical Testing of Steel Products


    Citing ASTM Standards Citation data is made available by participants in CrossRefs Cited-by Linking service. A comprehensive list of citations to this standard are listed here.

    A3 Standard Specification for Steel Joint Bars, Low, Medium, and High Carbon (Non-Heat-Treated)

    A6/A6M Standard Specification for General Requirements for Rolled Structural Steel Bars, Plates, Shapes, and Sheet Piling

    A20/A20M Standard Specification for General Requirements for Steel Plates for Pressure Vessels

    A27/A27M Standard Specification for Steel Castings, Carbon, for General Application

    A29/A29M Standard Specification for General Requirements for Steel Bars, Carbon and Alloy, Hot-Wrought

    A31 Standard Specification for Steel Rivets and Bars for Rivets, Pressure Vessels

    A49 Standard Specification for Heat-Treated Carbon Steel Joint Bars, Microalloyed Joint Bars, and Forged Carbon Steel Compromise Joint Bars

    A53/A53M Standard Specification for Pipe, Steel, Black and Hot-Dipped, Zinc-Coated, Welded and Seamless

    A65 Standard Specification for Steel Track Spikes

    A66 Standard Specification for Steel Screw Spikes

    A108 Standard Specification for Steel Bar, Carbon and Alloy, Cold-Finished

    A109/A109M Standard Specification for Steel, Strip, Carbon (0.25 Maximum Percent), Cold-Rolled

    A111 Standard Specification for Zinc-Coated (Galvanized) "Iron" Telephone and Telegraph Line Wire

    A116 Standard Specification for Metallic-Coated, Steel Woven Wire Fence Fabric

    A131/A131M Standard Specification for Structural Steel for Ships

    A134 Standard Specification for Pipe, Steel, Electric-Fusion (Arc)-Welded (Sizes NPS 16 and Over)

    A135/A135M Standard Specification for Electric-Resistance-Welded Steel Pipe

    A139/A139M Standard Specification for Electric-Fusion (Arc)-Welded Steel Pipe (NPS 4 and Over)

    A148/A148M Standard Specification for Steel Castings, High Strength, for Structural Purposes

    A176 Standard Specification for Stainless and Heat-Resisting Chromium Steel Plate, Sheet, and Strip

    A194/A194M Standard Specification for Carbon and Alloy Steel Nuts for Bolts for High Pressure or High Temperature Service, or Both

    A227/A227M Standard Specification for Steel Wire, Cold-Drawn for Mechanical Springs

    A228/A228M Standard Specification for Steel Wire, Music Spring Quality

    A229/A229M Standard Specification for Steel Wire, Quenched and Tempered for Mechanical Springs

    A230/A230M Standard Specification for Steel Wire, Oil-Tempered Carbon Valve Spring Quality

    A231/A231M Standard Specification for Chromium-Vanadium Alloy Steel Spring Wire

    A232/A232M Standard Specification for Chromium-Vanadium Alloy Steel Valve Spring Quality Wire

    A240/A240M Standard Specification for Chromium and Chromium-Nickel Stainless Steel Plate, Sheet, and Strip for Pressure Vessels and for General Applications

    A252 Standard Specification for Welded and Seamless Steel Pipe Piles

    A254/A254M Standard Specification for Copper-Brazed Steel Tubing

    A262 Standard Practices for Detecting Susceptibility to Intergranular Attack in Austenitic Stainless Steels

    A263 Standard Specification for Stainless Chromium Steel-Clad Plate

    A264 Standard Specification for Stainless Chromium-Nickel Steel-Clad Plate

    A265 Standard Specification for Nickel and Nickel-Base Alloy-Clad Steel Plate

    A266/A266M Standard Specification for Carbon Steel Forgings for Pressure Vessel Components

    A276 Standard Specification for Stainless Steel Bars and Shapes

    A289/A289M Standard Specification for Alloy Steel Forgings for Nonmagnetic Retaining Rings for Generators

    A290/A290M Standard Specification for Carbon and Alloy Steel Forgings for Rings for Reduction Gears

    A295/A295M Standard Specification for High-Carbon Anti-Friction Bearing Steel

    A297/A297M Standard Specification for Steel Castings, Iron-Chromium and Iron-Chromium-Nickel, Heat Resistant, for General Application

    A311/A311M Standard Specification for Cold-Drawn, Stress-Relieved Carbon Steel Bars Subject to Mechanical Property Requirements

    A312/A312M Standard Specification for Seamless, Welded, and Heavily Cold Worked Austenitic Stainless Steel Pipes

    A320/A320M Standard Specification for Alloy-Steel and Stainless Steel Bolting for Low-Temperature Service

    A333/A333M Standard Specification for Seamless and Welded Steel Pipe for Low-Temperature Service and Other Applications with Required Notch Toughness

    A334/A334M Standard Specification for Seamless and Welded Carbon and Alloy-Steel Tubes for Low-Temperature Service

    A336/A336M Standard Specification for Alloy Steel Forgings for Pressure and High-Temperature Parts

    A352/A352M Standard Specification for Steel Castings, Ferritic and Martensitic, for Pressure-Containing Parts, Suitable for Low-Temperature Service

    A356/A356M Standard Specification for Steel Castings, Carbon, Low Alloy, and Stainless Steel, Heavy-Walled for Steam Turbines

    A372/A372M Standard Specification for Carbon and Alloy Steel Forgings for Thin-Walled Pressure Vessels

    A381 Standard Specification for Metal-Arc-Welded Steel Pipe for Use With High-Pressure Transmission Systems

    A387/A387M Standard Specification for Pressure Vessel Plates, Alloy Steel, Chromium-Molybdenum

    A392 Standard Specification for Zinc-Coated Steel Chain-Link Fence Fabric

    A395/A395M Standard Specification for Ferritic Ductile Iron Pressure-Retaining Castings for Use at Elevated Temperatures

    A401/A401M Standard Specification for Steel Wire, Chromium-Silicon Alloy

    A407 Standard Specification for Steel Wire, Cold-Drawn, for Coiled-Type Springs

    A414/A414M Standard Specification for Steel, Sheet, Carbon, and High-Strength, Low-Alloy for Pressure Vessels

    A426/A426M Standard Specification for Centrifugally Cast Ferritic Alloy Steel Pipe for High-Temperature Service

    A434 Standard Specification for Steel Bars, Alloy, Hot-Wrought or Cold-Finished, Quenched and Tempered

    A439 Standard Specification for Austenitic Ductile Iron Castings

    A450/A450M Standard Specification for General Requirements for Carbon and Low Alloy Steel Tubes

    A451/A451M Standard Specification for Centrifugally Cast Austenitic Steel Pipe for High-Temperature Service

    A469/A469M Standard Specification for Vacuum-Treated Steel Forgings for Generator Rotors

    A470/A470M Standard Specification for Vacuum-Treated Carbon and Alloy Steel Forgings for Turbine Rotors and Shafts

    A471/A471M Standard Specification for Vacuum-Treated Alloy Steel Forgings for Turbine Rotor Disks and Wheels

    A473 Standard Specification for Stainless Steel Forgings

    A479/A479M Standard Specification for Stainless Steel Bars and Shapes for Use in Boilers and Other Pressure Vessels

    A480/A480M Standard Specification for General Requirements for Flat-Rolled Stainless and Heat-Resisting Steel Plate, Sheet, and Strip

    A484/A484M Standard Specification for General Requirements for Stainless Steel Bars, Billets, and Forgings

    A487/A487M Standard Specification for Steel Castings Suitable for Pressure Service

    A488/A488M Standard Practice for Steel Castings, Welding, Qualifications of Procedures and Personnel

    A489 Standard Specification for Carbon Steel Lifting Eyes

    A491 Standard Specification for Aluminum-Coated Steel Chain-Link Fence Fabric

    A494/A494M Standard Specification for Castings, Nickel and Nickel Alloy

    A499 Standard Specification for Steel Bars and Shapes, Carbon Rolled from “T” Rails

    A500/A500M Standard Specification for Cold-Formed Welded and Seamless Carbon Steel Structural Tubing in Rounds and Shapes

    A501 Standard Specification for Hot-Formed Welded and Seamless Carbon Steel Structural Tubing

    A505 Standard Specification for Steel, Sheet and Strip, Alloy, Hot-Rolled and Cold-Rolled, General Requirements for

    A508/A508M Standard Specification for Quenched and Tempered Vacuum-Treated Carbon and Alloy Steel Forgings for Pressure Vessels

    A510/A510M Standard Specification for General Requirements for Wire Rods and Coarse Round Wire, Carbon Steel, and Alloy Steel

    A511/A511M Standard Specification for Seamless Stainless Steel Mechanical Tubing

    A512 Standard Specification for Cold-Drawn Buttweld Carbon Steel Mechanical Tubing

    A513/A513M Standard Specification for Electric-Resistance-Welded Carbon and Alloy Steel Mechanical Tubing

    A514/A514M Standard Specification for High-Yield-Strength, Quenched and Tempered Alloy Steel Plate, Suitable for Welding

    A519 Standard Specification for Seamless Carbon and Alloy Steel Mechanical Tubing

    A521/A521M Standard Specification for Steel, Closed-Impression Die Forgings for General Industrial Use

    A523 Standard Specification for Plain End Seamless and Electric-Resistance-Welded Steel Pipe for High-Pressure Pipe-Type Cable Circuits

    A530/A530M Standard Specification for General Requirements for Specialized Carbon and Alloy Steel Pipe

    A536 Standard Specification for Ductile Iron Castings

    A541/A541M Standard Specification for Quenched and Tempered Carbon and Alloy Steel Forgings for Pressure Vessel Components

    A542/A542M Standard Specification for Pressure Vessel Plates, Alloy Steel, Quenched-and-Tempered, Chromium-Molybdenum, and Chromium-Molybdenum-Vanadium

    A551/A551M Standard Specification for Carbon Steel Tires for Railway and Rapid Transit Applications

    A554 Standard Specification for Welded Stainless Steel Mechanical Tubing

    A555/A555M Standard Specification for General Requirements for Stainless Steel Wire and Wire Rods

    A564/A564M Standard Specification for Hot-Rolled and Cold-Finished Age-Hardening Stainless Steel Bars and Shapes

    A565/A565M Standard Specification for Martensitic Stainless Steel Bars for High-Temperature Service

    A568/A568M Standard Specification for Steel, Sheet, Carbon, Structural, and High-Strength, Low-Alloy, Hot-Rolled and Cold-Rolled, General Requirements for

    A579/A579M Standard Specification for Superstrength Alloy Steel Forgings

    A580/A580M Standard Specification for Stainless Steel Wire

    A582/A582M Standard Specification for Free-Machining Stainless Steel Bars

    A587 Standard Specification for Electric-Resistance-Welded Low-Carbon Steel Pipe for the Chemical Industry

    A589/A589M Standard Specification for Seamless and Welded Carbon Steel Water-Well Pipe

    A592/A592M Standard Specification for High-Strength Quenched and Tempered Low-Alloy Steel Forged Parts for Pressure Vessels

    A595/A595M Standard Specification for Steel Tubes, Low-Carbon or High-Strength Low-Alloy, Tapered for Structural Use

    A600 Standard Specification for Tool Steel High Speed

    A615/A615M Standard Specification for Deformed and Plain Carbon-Steel Bars for Concrete Reinforcement

    A618/A618M Standard Specification for Hot-Formed Welded and Seamless High-Strength Low-Alloy Structural Tubing

    A623 Standard Specification for Tin Mill Products, General Requirements

    A623M Standard Specification for Tin Mill Products, General Requirements [Metric]

    A635/A635M Standard Specification for Steel, Sheet and Strip, Heavy-Thickness Coils, Hot-Rolled, Alloy, Carbon, Structural, High-Strength Low-Alloy, and High-Strength Low-Alloy with Improved Formability, General Requirements for

    A648 Standard Specification for Steel Wire, Hard-Drawn for Prestressed Concrete Pipe

    A649/A649M Standard Specification for Forged Steel Rolls Used for Corrugating Paper Machinery

    A653/A653M Standard Specification for Steel Sheet, Zinc-Coated (Galvanized) or Zinc-Iron Alloy-Coated (Galvannealed) by the Hot-Dip Process

    A663/A663M Standard Specification for Steel Bars, Carbon, Merchant Quality, Mechanical Properties

    A666 Standard Specification for Annealed or Cold-Worked Austenitic Stainless Steel Sheet, Strip, Plate, and Flat Bar

    A668/A668M Standard Specification for Steel Forgings, Carbon and Alloy, for General Industrial Use

    A671/A671M Standard Specification for Electric-Fusion-Welded Steel Pipe for Atmospheric and Lower Temperatures

    A672/A672M Standard Specification for Electric-Fusion-Welded Steel Pipe for High-Pressure Service at Moderate Temperatures

    A673/A673M Standard Specification for Sampling Procedure for Impact Testing of Structural Steel

    A675/A675M Standard Specification for Steel Bars, Carbon, Hot-Wrought, Special Quality, Mechanical Properties

    A679/A679M Standard Specification for Steel Wire, High Tensile Strength, Cold Drawn

    A681 Standard Specification for Tool Steels Alloy

    A684/A684M Standard Specification for Steel, Strip, High-Carbon, Cold-Rolled

    A686 Standard Specification for Tool Steel, Carbon

    A691/A691M Standard Specification for Carbon and Alloy Steel Pipe, Electric-Fusion-Welded for High-Pressure Service at High Temperatures

    A696 Standard Specification for Steel Bars, Carbon, Hot-Wrought or Cold-Finished, Special Quality, for Pressure Piping Components

    A703/A703M Standard Specification for Steel Castings, General Requirements, for Pressure-Containing Parts

    A705/A705M Standard Specification for Age-Hardening Stainless Steel Forgings

    A706/A706M Standard Specification for Deformed and Plain Low-Alloy Steel Bars for Concrete Reinforcement

    A709/A709M Standard Specification for Structural Steel for Bridges

    A713 Standard Specification for Steel Wire, High-Carbon Spring, for Heat-Treated Components

    A722/A722M Standard Specification for Uncoated High-Strength Steel Bars for Prestressing Concrete

    A723/A723M Standard Specification for Alloy Steel Forgings for High-Strength Pressure Component Application

    A726 Standard Specification for Cold-Rolled Magnetic Lamination Quality Steel, Semiprocessed Types

    A739 Standard Specification for Steel Bars, Alloy, Hot-Wrought, for Elevated Temperature or Pressure-Containing Parts, or Both

    A741 Standard Specification for Metallic-Coated Steel Wire Rope and Fittings for Highway Guardrail

    A743/A743M Standard Specification for Castings, Iron-Chromium, Iron-Chromium-Nickel, Corrosion Resistant, for General Application

    A744/A744M Standard Specification for Castings, Iron-Chromium-Nickel, Corrosion Resistant, for Severe Service

    A747/A747M Standard Specification for Steel Castings, Stainless, Precipitation Hardening

    A749/A749M Standard Specification for Steel, Strip, Carbon and High-Strength, Low-Alloy, Hot-Rolled, General Requirements for

    A757/A757M Standard Specification for Steel Castings, Ferritic and Martensitic, for Pressure-Containing and Other Applications, for Low-Temperature Service

    A761/A761M Standard Specification for Corrugated Steel Structural Plate, Zinc-Coated, for Field-Bolted Pipe, Pipe-Arches, and Arches

    A763 Standard Practices for Detecting Susceptibility to Intergranular Attack in Ferritic Stainless Steels

    A764 Standard Specification for Metallic Coated Carbon Steel Wire, Coated at Size and Drawn to Size for Mechanical Springs

    A765/A765M Standard Specification for Carbon Steel and Low-Alloy Steel Pressure-Vessel-Component Forgings with Mandatory Toughness Requirements

    A768/A768M Standard Specification for Vacuum-Treated 12 % Chromium Alloy Steel Forgings for Turbine Rotors and Shafts

    A769/A769M Standard Specification for Carbon and High-Strength Electric Resistance Forge-Welded Steel Structural Shapes

    A770/A770M Standard Specification for Through-Thickness Tension Testing of Steel Plates for Special Applications

    A778 Standard Specification for Welded, Unannealed Austenitic Stainless Steel Tubular Products

    A781/A781M Standard Specification for Castings, Steel and Alloy, Common Requirements, for General Industrial Use

    A788/A788M Standard Specification for Steel Forgings, General Requirements

    A790/A790M Standard Specification for Seamless and Welded Ferritic/Austenitic Stainless Steel Pipe

    A793 Standard Specification for Rolled Floor Plate, Stainless Steel

    A805/A805M Standard Specification for Steel, Flat Wire, Carbon, Cold-Rolled

    A809 Standard Specification for Aluminum-Coated (Aluminized) Carbon Steel Wire

    A810 Standard Specification for Zinc-Coated (Galvanized) Steel Pipe Winding Mesh

    A813/A813M Standard Specification for Single- or Double-Welded Austenitic Stainless Steel Pipe

    A814/A814M Standard Specification for Cold-Worked Welded Austenitic Stainless Steel Pipe

    A817 Standard Specification for Metallic-Coated Steel Wire for Chain-Link Fence Fabric and Marcelled Tension Wire

    A818 Standard Specification for Coppered Carbon Steel Wire

    A820/A820M Standard Specification for Steel Fibers for Fiber-Reinforced Concrete

    A821/A821M Standard Specification for Steel Wire, Hard-Drawn for Prestressed Concrete Tanks

    A832/A832M Standard Specification for Pressure Vessel Plates, Alloy Steel, Chromium-Molybdenum-Vanadium

    A833 Standard Practice for Indentation Hardness of Metallic Materials by Comparison Hardness Testers

    A847/A847M Standard Specification for Cold-Formed Welded and Seamless High-Strength, Low-Alloy Structural Tubing with Improved Atmospheric Corrosion Resistance

    A853 Standard Specification for Steel Wire, Carbon, for General Use

    A854/A854M Standard Specification for Metallic-Coated Steel Smooth High-Tensile Fence and Trellis Wire

    A859/A859M Standard Specification for Age-Hardening Alloy Steel Forgings for Pressure Vessel Components

    A871/A871M Standard Specification for High-Strength Low-Alloy Structural Steel Plate With Atmospheric Corrosion Resistance

    A877/A877M Standard Specification for Steel Wire, Chromium-Silicon Alloy, Chrome-Silicon-Vanadium Alloy Valve Spring Quality

    A878/A878M Standard Specification for Steel Wire, Modified Chromium Vanadium Valve Spring Quality

    A881/A881M Standard Specification for Steel Wire, Indented, Low-Relaxation for Prestressed Concrete Railroad Ties

    A882/A882M Standard Specification for Filled Epoxy-Coated Seven-Wire Prestressing Steel Strand

    A887 Standard Specification for Borated Stainless Steel Plate, Sheet, and Strip for Nuclear Application

    A890/A890M Standard Specification for Castings, Iron-Chromium-Nickel-Molybdenum Corrosion-Resistant, Duplex (Austenitic/Ferritic) for General Application

    A895 Standard Specification for Free-Machining Stainless Steel Plate, Sheet, and Strip

    A897/A897M Standard Specification for Austempered Ductile Iron Castings

    A901 Standard Specification for Amorphous Magnetic Core Alloys, Semi-Processed Types

    A905 Standard Specification for Steel Wire, Pressure Vessel Winding

    A909/A909M Standard Specification for Steel Forgings, Microalloy, for General Industrial Use

    A911/A911M Standard Specification for Uncoated, Stress-Relieved Steel Bars for Prestressed Concrete Ties

    A915/A915M Standard Specification for Steel Castings, Carbon, and Alloy, Chemical Requirements Similar to Standard Wrought Grades

    A917 Standard Specification for Steel Sheet, Coated by the Electrolytic Process for Applications Requiring Designation of the Coating Mass on Each Surface (General Requirements)

    A920/A920M Standard Specification for Steel Bars, Microalloy, Hot-Wrought, Special Quality, Mechanical Properties

    A923 Standard Test Methods for Detecting Detrimental Intermetallic Phase in Duplex Austenitic/Ferritic Stainless Steels

    A924/A924M Standard Specification for General Requirements for Steel Sheet, Metallic-Coated by the Hot-Dip Process

    A940/A940M Standard Specification for Vacuum Treated Steel Forgings, Alloy, Differentially Heat Treated, for Turbine Rotors

    A945/A945M Standard Specification for High-Strength Low-Alloy Structural Steel Plate with Low Carbon and Restricted Sulfur for Improved Weldability, Formability, and Toughness

    A947M Standard Specification for Textured Stainless Steel Sheet [Metric]

    A955/A955M Standard Specification for Deformed and Plain Stainless-Steel Bars for Concrete Reinforcement

    A957/A957M Standard Specification for Investment Castings, Steel and Alloy, Common Requirements, for General Industrial Use

    A958/A958M Standard Specification for Steel Castings, Carbon and Alloy, with Tensile Requirements, Chemical Requirements Similar to Standard Wrought Grades

    A960/A960M Standard Specification for Common Requirements for Wrought Steel Piping Fittings

    A961/A961M Standard Specification for Common Requirements for Steel Flanges, Forged Fittings, Valves, and Parts for Piping Applications

    A962/A962M Standard Specification for Common Requirements for Bolting Intended for Use at Any Temperature from Cryogenic to the Creep Range

    A965/A965M Standard Specification for Steel Forgings, Austenitic, for Pressure and High Temperature Parts

    A970/A970M Standard Specification for Headed Steel Bars for Concrete Reinforcement

    A974 Standard Specification for Welded Wire Fabric Gabions and Gabion Mattresses (Metallic Coated or Polyvinyl Chloride (PVC) Coated)

    A975 Standard Specification for Double–Twisted Hexagonal Mesh Gabions and Revet Mattresses (Metallic-Coated Steel Wire or Metallic-Coated Steel Wire With Poly(Vinyl Chloride) (PVC) Coating)

    A983/A983M Standard Specification for Continuous Grain Flow Forged Carbon and Alloy Steel Crankshafts for Medium Speed Diesel Engines

    A985/A985M Standard Specification for Steel Investment Castings General Requirements, for Pressure-Containing Parts

    A994 Standard Guide for Editorial Procedures and Form of Product Specifications for Steel, Stainless Steel, and Related Alloys

    A996/A996M Standard Specification for Rail-Steel and Axle-Steel Deformed Bars for Concrete Reinforcement

    A999/A999M Standard Specification for General Requirements for Alloy and Stainless Steel Pipe

    A1000/A1000M Standard Specification for Steel Wire, Carbon and Alloy Specialty Spring Quality

    A1001 Standard Specification for High Strength Steel Castings in Heavy Sections

    A1002 Standard Specification for Castings, Nickel-Aluminum Ordered Alloy

    A1005/A1005M Standard Specification for Steel Line Pipe, Black, Plain End, Longitudinal and Helical Seam, Double Submerged-Arc Welded

    A1006/A1006M Standard Specification for Steel Line Pipe, Black, Plain End, Laser Beam Welded

    A1008/A1008M Standard Specification for Steel, Sheet, Cold-Rolled, Carbon, Structural, High-Strength Low-Alloy, High-Strength Low-Alloy with Improved Formability, Solution Hardened, and Bake Hardenable

    A1011/A1011M Standard Specification for Steel, Sheet and Strip, Hot-Rolled, Carbon, Structural, High-Strength Low-Alloy, High-Strength Low-Alloy with Improved Formability, and Ultra-High Strength

    A1014/A1014M Standard Specification for Precipitation-Hardening Bolting (UNS N07718) for High Temperature Service

    A1016/A1016M Standard Specification for General Requirements for Ferritic Alloy Steel, Austenitic Alloy Steel, and Stainless Steel Tubes

    A1018/A1018M Standard Specification for Steel, Sheet and Strip, Heavy-Thickness Coils, Hot-Rolled, Carbon, Commercial, Drawing, Structural, High-Strength Low-Alloy, High-Strength Low-Alloy with Improved Formability, and Ultra-High Strength

    A1021/A1021M Standard Specification for Martensitic Stainless Steel Forgings and Forging Stock for High-Temperature Service

    A1022/A1022M Standard Specification for Deformed and Plain Stainless Steel Wire and Welded Wire for Concrete Reinforcement

    A1024/A1024M Standard Specification for Steel Line Pipe, Black, Plain-End, Seamless

    A1031/A1031M Standard Specification for Steel, Sheet and Strip, Heavy-Thickness Coils, Alloy, Drawing Steel and Structural Steel, Hot-Rolled

    A1034/A1034M Standard Test Methods for Testing Mechanical Splices for Steel Reinforcing Bars

    A1035/A1035M Standard Specification for Deformed and Plain, Low-Carbon, Chromium, Steel Bars for Concrete Reinforcement

    A1038 Standard Test Method for Portable Hardness Testing by the Ultrasonic Contact Impedance Method

    A1039/A1039M Standard Specification for Steel, Sheet, Hot Rolled, Carbon, Commercial, Structural, and High-Strength Low-Alloy, Produced by Twin-Roll Casting Process

    A1043/A1043M Standard Specification for Structural Steel with Low Yield to Tensile Ratio for Use in Buildings

    A1044/A1044M Standard Specification for Steel Stud Assemblies for Shear Reinforcement of Concrete

    A1049/A1049M Standard Specification for Stainless Steel Forgings, Ferritic/Austenitic (Duplex), for Pressure Vessels and Related Components

    A1053/A1053M Standard Specification for Welded Ferritic-Martensitic Stainless Steel Pipe

    A1057/A1057M Standard Specification for Steel, Structural Tubing, Cold Formed, Welded, Carbon, Zinc-Coated (Galvanized) by the Hot-Dip Process

    A1061/A1061M Standard Test Methods for Testing Multi-Wire Steel Strand

    A1063/A1063M Standard Specification for Steel Sheet, Twin-Roll Cast, Zinc-Coated (Galvanized) by the Hot-Dip Process

    A1064/A1064M Standard Specification for Carbon-Steel Wire and Welded Wire Reinforcement, Plain and Deformed, for Concrete

    A1069/A1069M Standard Specification for Laser-Fused Stainless Steel Bars, Plates, and Shapes

    A1075 Standard Specification for Flanged Steel U-Channel Posts

    A1076/A1076M Standard Specification for Cold Formed Carbon Structural Steel Tubing Made from Metallic Precoated Sheet Steel

    A1077/A1077M Standard Specification for Structural Steel with Improved Yield Strength at High Temperature for Use in Buildings

    A1079 Standard Specification for Steel Sheet, Complex Phase (CP), Dual Phase (DP) and Transformation Induced Plasticity (TRIP), Zinc-Coated (Galvanized) or Zinc-Iron Alloy-Coated (Galvannealed) by the Hot-Dip Process

    A1082/A1082M Standard Specification for High Strength Precipitation Hardening and Duplex Stainless Steel Bolting for Special Purpose Applications

    A1083/A1083M Standard Specification for Steel, Sheet, Cold-Rolled, Carbon, Structural, High-Strength Low-Alloy, Produced by Twin-Roll Casting Process

    A1084 Standard Test Method for Detecting Detrimental Phases in Lean Duplex Austenitic/Ferritic Stainless Steels

    A1085 Standard Specification for Cold-Formed Welded Carbon Steel Hollow Structural Sections (HSS)

    A1088 Standard Specification for Steel, Sheet, Cold-Rolled, Complex Phase (CP), Dual Phase (DP) and Transformation Induced Plasticity (TRIP)

    A1090/A1090M Standard Specification for Forged Rings and Hollows Produced from Steels with Atmospheric Corrosion Resistance

    B338 Standard Specification for Seamless and Welded Titanium and Titanium Alloy Tubes for Condensers and Heat Exchangers

    B432 Standard Specification for Copper and Copper Alloy Clad Steel Plate

    B474 Standard Specification for Electric Fusion Welded Nickel and Nickel Alloy Pipe

    B498/B498M Standard Specification for Zinc-Coated (Galvanized) Steel Core Wire for Use in Overhead Electrical Conductors

    B523/B523M Standard Specification for Seamless and Welded Zirconium and Zirconium Alloy Tubes

    B606/B606M Standard Specification for High-Strength Zinc-Coated (Galvanized) Steel Core Wire for Aluminum and Aluminum-Alloy Conductors, Steel Reinforced

    B802/B802M Standard Specification for Zinc-5% Aluminum-Mischmetal Alloy-Coated Steel Core Wire for Aluminum Conductors, Steel Reinforced (ACSR)

    B803/B803M Standard Specification for High-Strength Zinc-5% Aluminum-Mischmetal Alloy-Coated Steel Core Wire for Use in Overhead Electrical Conductors

    B804 Standard Specification for UNS N08367 and UNS N08926 Welded Pipe

    B861 Standard Specification for Titanium and Titanium Alloy Seamless Pipe

    B862 Standard Specification for Titanium and Titanium Alloy Welded Pipe

    B957/B957M Standard Specification for Extra-High-Strength and Ultra-High-Strength Zinc-Coated (Galvanized) Steel Core Wire for Overhead Electrical Conductors

    B958/B958M Standard Specification for Extra-High-Strength and Ultra-High-Strength Class A Zinc–5% Aluminum-Mischmetal Alloy-Coated Steel Core Wire for Use in Overhead Electrical Conductors

    C692 Standard Test Method for Evaluating the Influence of Thermal Insulations on External Stress Corrosion Cracking Tendency of Austenitic Stainless Steel

    C774 Standard Test Method for Yield Strength of Enameling Steels After Straining and Firing

    C915 Standard Specification for Precast Reinforced Concrete Crib Wall Members

    C935 Standard Specification for General Requirements for Prestressed Concrete Poles Statically Cast

    C1513 Standard Specification for Steel Tapping Screws for Cold-Formed Steel Framing Connections

    E8/E8M Standard Test Methods for Tension Testing of Metallic Materials

    E18 Standard Test Methods for Rockwell Hardness of Metallic Materials

    E185 Standard Practice for Design of Surveillance Programs for Light-Water Moderated Nuclear Power Reactor Vessels

    E531 Standard Practice for Surveillance Testing of High-Temperature Nuclear Component Materials

    E606/E606M Standard Test Method for Strain-Controlled Fatigue Testing

    E1268 Standard Practice for Assessing the Degree of Banding or Orientation of Microstructures

    E1450 Standard Test Method for Tension Testing of Structural Alloys in Liquid Helium

    E1592 Standard Test Method for Structural Performance of Sheet Metal Roof and Siding Systems by Uniform Static Air Pressure Difference

    E2215 Standard Practice for Evaluation of Surveillance Capsules from Light-Water Moderated Nuclear Power Reactor Vessels

    E2248 Standard Test Method for Impact Testing of Miniaturized Charpy V-Notch Specimens

    E2298 Standard Test Method for Instrumented Impact Testing of Metallic Materials

    F256 Standard Specification for Chromium-Iron Sealing Alloys with 18 or 28 Percent Chromium

    F432 Standard Specification for Roof and Rock Bolts and Accessories

    F541 Standard Specification for Alloy Steel Eyebolts

    F668 Standard Specification for Polyvinyl Chloride (PVC) and Other Organic Polymer-Coated Steel Chain-Link Fence Fabric

    F680 Standard Test Methods for Nails

    F682 Standard Specification for Wrought Carbon Steel Sleeve-Type Pipe Couplings

    F1074 Standard Specification for Cleats, Welded Horn Type

    F1309 Standard Practice for Installation Procedures for Fitting Chocks to Marine Machinery Foundations

    F1376 Standard Guide for Metallurgical Analysis for Gas Distribution System Components

    F1554 Standard Specification for Anchor Bolts, Steel, 36, 55, and 105-ksi Yield Strength

    F1664 Standard Specification for Poly(Vinyl Chloride) (PVC) and Other Conforming Organic Polymer-Coated Steel Tension Wire Used with Chain-Link Fence

    F1665 Standard Specification for Poly(Vinyl Chloride) (PVC) and Other Conforming Organic Polymer-Coated Steel Barbed Wire Used With Chain-Link Fence

    F1910 Standard Specification for Long Barbed Tape Obstacles

    F2282 Standard Specification for Quality Assurance Requirements for Carbon and Alloy Steel Wire, Rods, and Bars for Mechanical Fasteners

    G129 Standard Practice for Slow Strain Rate Testing to Evaluate the Susceptibility of Metallic Materials to Environmentally Assisted Cracking


    Referenced ASTM Standards The documents listed below are referenced within the subject standard but are not provided as part of the standard.

    A623 Specification for Tin Mill Products, General Requirements

    A623M Specification for Tin Mill Products, General Requirements [Metric]

    A703/A703M Specification for Steel Castings, General Requirements, for Pressure-Containing Parts

    A781/A781M Specification for Castings, Steel and Alloy, Common Requirements, for General Industrial Use

    A833 Practice for Indentation Hardness of Metallic Materials by Comparison Hardness Testers

    E4 Practices for Force Verification of Testing Machines

    E6 Terminology Relating to Methods of Mechanical Testing

    E8/E8M Test Methods for Tension Testing of Metallic Materials

    E10 Test Method for Brinell Hardness of Metallic Materials

    E18 Test Methods for Rockwell Hardness of Metallic Materials

    E23 Test Methods for Notched Bar Impact Testing of Metallic Materials

    E29 Practice for Using Significant Digits in Test Data to Determine Conformance with Specifications

    E83 Practice for Verification and Classification of Extensometer Systems

    E110 Test Method for Indentation Hardness of Metallic Materials by Portable Hardness Testers

    E190 Test Method for Guided Bend Test for Ductility of Welds

    E290 Test Methods for Bend Testing of Material for Ductility