ASTM A36 / A36M - 12 Standard Specification for Carbon Structural Steel


    Citing ASTM Standards Citation data is made available by participants in CrossRefs Cited-by Linking service. A comprehensive list of citations to this standard are listed here.

    A65 Standard Specification for Steel Track Spikes

    A134 Standard Specification for Pipe, Steel, Electric-Fusion (Arc)-Welded (Sizes NPS 16 and Over)

    A572/A572M Standard Specification for High-Strength Low-Alloy Columbium-Vanadium Structural Steel

    A690/A690M Standard Specification for High-Strength Low-Alloy Nickel, Copper, Phosphorus Steel H-Piles and Sheet Piling with Atmospheric Corrosion Resistance for Use in Marine Environments

    A709/A709M Standard Specification for Structural Steel for Bridges

    A761/A761M Standard Specification for Corrugated Steel Structural Plate, Zinc-Coated, for Field-Bolted Pipe, Pipe-Arches, and Arches

    A786/A786M Standard Specification for Hot-Rolled Carbon, Low-Alloy, High-Strength Low-Alloy, and Alloy Steel Floor Plates

    A950/A950M Standard Specification for Fusion-Bonded Epoxy-Coated Structural Steel H-Piles and Sheet Piling

    A964/A964M Standard Specification for Corrugated Steel Box Culverts

    A998/A998M Standard Practice for Structural Design of Reinforcements for Fittings in Factory–Made Corrugated Steel Pipe for Sewers and Other Applications

    A1044/A1044M Standard Specification for Steel Stud Assemblies for Shear Reinforcement of Concrete

    A1075 Standard Specification for Flanged Steel U-Channel Posts

    B864/B864M Standard Specification for Corrugated Aluminum Box Culverts

    C76 Standard Specification for Reinforced Concrete Culvert, Storm Drain, and Sewer Pipe

    C76M Standard Specification for Reinforced Concrete Culvert, Storm Drain, and Sewer Pipe (Metric)

    C361 Standard Specification for Reinforced Concrete Low-Head Pressure Pipe

    C361M Standard Specification for Reinforced Concrete Low-Head Pressure Pipe (Metric)

    C506 Standard Specification for Reinforced Concrete Arch Culvert, Storm Drain, and Sewer Pipe

    C506M Standard Specification for Reinforced Concrete Arch Culvert, Storm Drain, and Sewer Pipe (Metric)

    C507 Standard Specification for Reinforced Concrete Elliptical Culvert, Storm Drain, and Sewer Pipe

    C507M Standard Specification for Reinforced Concrete Elliptical Culvert, Storm Drain, and Sewer Pipe (Metric)

    C655 Standard Specification for Reinforced Concrete D-Load Culvert, Storm Drain, and Sewer Pipe

    C655M Standard Specification for Reinforced Concrete D-Load Culvert, Storm Drain, and Sewer Pipe (Metric)

    C868 Standard Test Method for Chemical Resistance of Protective Linings

    C935 Standard Specification for General Requirements for Prestressed Concrete Poles Statically Cast

    C1146 Standard Guide for Prefabricated Panel and H–bar Insulation Systems for Vessels, Ducts and Equipment Operating at Temperatures Above Ambient Air

    C1572 Standard Guide for Dry Lead Glass and Oil-Filled Lead Glass Radiation Shielding Window Components for Remotely Operated Facilities

    D1014 Standard Practice for Conducting Exterior Exposure Tests of Paints and Coatings on Metal Substrates

    D2485 Standard Test Methods for Evaluating Coatings For High Temperature Service

    D3966/D3966M Standard Test Methods for Deep Foundations Under Lateral Load

    D4014 Standard Specification for Plain and Steel-Laminated Elastomeric Bearings for Bridges

    D5139 Standard Specification for Sample Preparation for Qualification Testing of Coatings to be Used in Nuclear Power Plants

    D5367 Standard Practice for Evaluating Coatings Applied Over Surfaces Treated With Inhibitors Used to Prevent Flash Rusting of Steel When Water or Water/Abrasive Blasted

    D5499 Standard Test Methods for Heat Resistance of Polymer Linings for Flue Gas Desulfurization Systems

    D5973 Standard Specification for Elastomeric Strip Seals with Steel Locking Edge Rails Used in Expansion Joint Sealing

    D5977 Standard Specification for High Load Rotational Spherical Bearings for Bridges and Structures

    D6137 Standard Test Method for Sulfuric Acid Resistance of Polymer Linings for Flue Gas Desulfurization Systems

    D6297 Standard Specification for Asphaltic Plug Joints for Bridges

    D7055 Standard Practice for Preparation (by Abrasive Blast Cleaning) of Hot-Rolled Carbon Steel Panels for Testing of Coatings

    D7230 Standard Guide for Evaluating Polymeric Lining Systems for Water Immersion in Coating Service Level III Safety-Related Applications on Metal Substrates

    E2256 Standard Guide for Hydraulic Integrity of New, Repaired, or Reconstructed Aboveground Storage Tank Bottoms for Petroleum Service

    E2513 Standard Specification for Multi-Story Building External Evacuation Platform Rescue Systems

    F670 Standard Specification for Tanks, 5 and 10-Gal (20 and 40-L) Lube Oil Dispensing

    F765 Standard Specification for Wildcats, Ship Anchor Chain

    F986 Standard Specification for Suction Strainer Boxes

    F993 Standard Specification for Valve Locking Devices

    F998 Standard Specification for Centrifugal Pump, Shipboard Use

    F1018 Standard Specification for Steel Emergency Gear Stowage Locker

    F1019M Standard Specification for Steel Deck Gear Stowage Box [Metric]

    F1047 Standard Specification for Frying and Braising Pans, Tilting Type

    F1068 Standard Specification for Doors, Double, Gastight/Airtight, Individually Dogged, for Marine Use

    F1069 Standard Specification for Doors, Watertight, Gastight/Airtight and Weathertight, Individually Dogged, for Marine Use

    F1070 Standard Specification for Doors, Non-Tight, for Marine Use

    F1071 Standard Specification for Expanded-Metal Bulkhead Panels

    F1072 Standard Specification for Expanded-Metal Doors

    F1073 Standard Specification for Door Fittings, for Watertight /Gastight /Airtight, Weathertight, and Non-Tight Doors, for Marine Use

    F1074 Standard Specification for Cleats, Welded Horn Type

    F1106 Standard Specification for Warping Heads, Rope Handling (Gypsy Head, Capstan Head)

    F1142 Standard Specification for Manhole Cover Assembly, Bolted, Semi-Flush, Oiltight and Watertight

    F1143 Standard Specification for Manhole Cover Assembly, Bolted, Raised, Oiltight and Watertight

    F1144 Standard Specification for Manhole Cover Assembly, Bolted, Semi-Flush, Oiltight and Watertight, Hinged

    F1182 Standard Specification for Anodes, Sacrificial Zinc Alloy

    F1196 Standard Specification for Sliding Watertight Door Assemblies

    F1217 Standard Specification for Cooker, Steam

    F1233 Standard Test Method for Security Glazing Materials And Systems

    F1311 Standard Specification for Large–Diameter Fabricated Carbon Steel Flanges

    F1333 Standard Specification for Construction of Fire and Foam Station Cabinets

    F1385 Standard Practice for Platforms in Cargo Tanks

    F1386 Standard Guide for Construction of a Sounding Tube and Striker Plate for Tank Sounding

    F1510 Standard Specification for Rotary Positive Displacement Pumps, Ships Use

    F1521 Standard Test Methods for Performance of Range Tops

    F1602 Standard Specification for Kettles, Steam-Jacketed, 20 to 200 gal (75.7 to 757 L), Floor or Wall Mounted, Direct Steam, Gas and Electric Heated

    F1695 Standard Test Method for Performance of Underfired Broilers

    F1718 Standard Specification for Rotary Positive Displacement Distillate Fuel Pumps

    F2092 Standard Specification for Convection Oven Gas or Electric

    F2141 Standard Test Method for Performance of Self-Serve Hot Deli Cases

    F2237 Standard Test Method for Performance of Upright Overfired Broilers

    F2796 Standard Specification for Hot Food Holding Tables

    F2891 Standard Specification for Commercial Bulk Milk Dispensers, Mechanically Refrigerated

    F2988 Standard Specification for Commercial Coffee Brewers

    F2991 Standard Guide for Doubler Plate Repairs for Non-Classed Ship Structures

    G92 Standard Practice for Characterization of Atmospheric Test Sites

    G210 Standard Practice for Operating the Severe Wastewater Analysis Testing Apparatus


    Referenced ASTM Standards The documents listed below are referenced within the subject standard but are not provided as part of the standard.

    A6/A6M Specification for General Requirements for Rolled Structural Steel Bars, Plates, Shapes, and Sheet Piling

    A27/A27M Specification for Steel Castings, Carbon, for General Application

    A307 Specification for Carbon Steel Bolts, Studs, and Threaded Rod 60 000 PSI Tensile Strength

    A325 Specification for Structural Bolts, Steel, Heat Treated, 120/105 ksi Minimum Tensile Strength

    A325M Specification for Structural Bolts, Steel, Heat Treated 830 MPa Minimum Tensile Strength (Metric)

    A500 Specification for Cold-Formed Welded and Seamless Carbon Steel Structural Tubing in Rounds and Shapes

    A501 Specification for Hot-Formed Welded and Seamless Carbon Steel Structural Tubing

    A502 Specification for Rivets, Steel, Structural

    A563 Specification for Carbon and Alloy Steel Nuts

    A563M Specification for Carbon and Alloy Steel Nuts (Metric)

    A668/A668M Specification for Steel Forgings, Carbon and Alloy, for General Industrial Use

    A1011/A1011M Specification for Steel, Sheet and Strip, Hot-Rolled, Carbon, Structural, High-Strength Low-Alloy, High-Strength Low-Alloy with Improved Formability, and Ultra-High Strength

    A1018/A1018M Specification for Steel, Sheet and Strip, Heavy-Thickness Coils, Hot-Rolled, Carbon, Commercial, Drawing, Structural, High-Strength Low-Alloy, High-Strength Low-Alloy with Improved Formability, and Ultra-High Strength

    F568M Specification for Carbon and Alloy Steel Externally Threaded Metric Fasteners (Metric)

    F1554 Specification for Anchor Bolts, Steel, 36, 55, and 105-ksi Yield Strength