ASTM D2497

1.1 These tolerances cover first-quality, manufactured, organic-base filament single yarns (namely, bright, semi-dull, dull, solution-dyed, bleached, unbleached, etc.) regardless of the package type. These tolerances cover permissible variations in linear density, tenacity, elongation, twist, and commercial weight.

1.1.1 These tolerances do not apply to rubber yarns, spandex yarns, metal-covered yarns, nor to bulk yarns since test methods for these types of yarn are not available. These tolerances do not apply to industrial filament yarns.

Tolerances for inorganic glass yarns are given in Specifications and Methods D 578.

1.2 This standard covers only tolerances. It does not cover specifications or quality levels, for yarns to be used for any purpose. Specifications for specific properties are subject to agreement by the purchaser and the supplier.

While the tolerances specified may be applied to yarn taken from fabric, the properties of such yarns will likely differ from the original level.

This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

2. Referenced Documents

D123 Terminology Relating to Textiles
D1423 Test Method for Twist in Yarns by Direct-Counting
D1907 Test Method for Linear Density of Yarn (Yarn Number) by the Skein Method
D2256 Test Method for Tensile Properties of Yarns by the Single-Strand Method
D2258 Practice for Sampling Yarn for Testing
D2494 Test Method for Commercial Mass of a Shipment of Yarn or Manufactured Staple Fiber or Tow
D4849 Terminology Related to Yarns and Fibers
D578 Specification for Glass Fiber Strands

Index Terms

breaking strength; cellulose-base man-made fibers; commercial mass; elongation strand; man-made-fibers; organic base; strand; synthetic base; tolerances; twist; yarn; yarn number; ICS Number Code 59.060.20; 59.060.20

Citing ASTM Standards

[Back to Top]