2. Referenced Documents

B117 Practice for Operating Salt Spray (Fog) Apparatus
C1087 Test Method for Determining Compatibility of Liquid-Applied Sealants with Accessories Used in Structural Glazing Systems
C1172 Specification for Laminated Architectural Flat Glass
C1115 Specification for Dense Elastomeric Silicone Rubber Gaskets and Accessories
C1036 Specification for Flat Glass
C1135 Test Method for Determining Tensile Adhesion Properties of Structural Sealants
C1048 Specification for Heat-Treated Flat Glass--Kind HS, Kind FT Coated and Uncoated Glass
C1392 Guide for Evaluating Failure of Structural Sealant Glazing
C1265 Test Method for Determining the Tensile Properties of an Insulating Glass Edge Seal for Structural Glazing Applications
C1394 Guide for In-Situ Structural Silicone Glazing Evaluation
C162 Terminology of Glass and Glass Products
C1184 Specification for Structural Silicone Sealants
C119 Terminology Relating to Dimension Stone
C1294 Test Method for Compatibility of Insulating Glass Edge Sealants with Liquid-Applied Glazing Materials
C1193 Guide for Use of Joint Sealants
C1472 Guide for Calculating Movement and Other Effects When Establishing Sealant Joint Width
C1487 Guide for Remedying Structural Silicone Glazing
C1330 Specification for Cylindrical Sealant Backing for Use with Cold Liquid-Applied Sealants
C1248 Test Method for Staining of Porous Substrate by Joint Sealants
C1249 Guide for Secondary Seal for Sealed Insulating Glass Units for Structural Sealant Glazing Applications
C1521 Practice for Evaluating Adhesion of Installed Weatherproofing Sealant Joints
C1369 Specification for Secondary Edge Sealants for Structurally Glazed Insulating Glass Units
C1253 Test Method for Determining the Outgassing Potential of Sealant Backing
C1564 Guide for Use of Silicone Sealants for Protective Glazing Systems
C615 Specification for Granite Dimension Stone
C503 Specification for Marble Dimension Stone
C509 Specification for Elastomeric Cellular Preformed Gasket and Sealing Material
C510 Test Method for Staining and Color Change of Single- or Multicomponent Joint Sealants
C568 Specification for Limestone Dimension Stone
C717 Terminology of Building Seals and Sealants
C719 Test Method for Adhesion and Cohesion of Elastomeric Joint Sealants Under Cyclic Movement (Hockman Cycle)
C864 Specification for Dense Elastomeric Compression Seal Gaskets, Setting Blocks, and Spacers
C920 Specification for Elastomeric Joint Sealants
C794 Test Method for Adhesion-in-Peel of Elastomeric Joint Sealants
D1566 Terminology Relating to Rubber
D2203 Test Method for Staining from Sealants
D4541 Test Method for Pull-Off Strength of Coatings Using Portable Adhesion Testers
E1300 Practice for Determining Load Resistance of Glass in Buildings
E1233 Test Method for Structural Performance of Exterior Windows, Doors, Skylights, and Curtain Walls by Cyclic Air Pressure Differential
E1105 Test Method for Field Determination of Water Penetration of Installed Exterior Windows, Skylights, Doors, and Curtain Walls, by Uniform or Cyclic Static Air Pressure Difference
E1424 Test Method for Determining the Rate of Air Leakage Through Exterior Windows, Curtain Walls, and Doors Under Specified Pressure and Temperature Differences Across the Specimen
E1425 Practice for Determining the Acoustical Performance of Exterior Windows and Doors
E1886 Test Method for Performance of Exterior Windows, Curtain Walls, Doors, and Impact Protective Systems Impacted by Missile(s) and Exposed to Cyclic Pressure Differentials
E1996 Specification for Performance of Exterior Windows, Curtain Walls, Doors, and Impact Protective Systems Impacted by Windborne Debris in Hurricanes
E1825 Guide for Evaluation of Exterior Building Wall Materials, Products, and Systems
E2099 Practice for the Specification and Evaluation of Pre-Construction Laboratory Mockups of Exterior Wall Systems
E2128 Guide for Evaluating Water Leakage of Building Walls
E283 Test Method for Determining Rate of Air Leakage Through Exterior Windows, Curtain Walls, and Doors Under Specified Pressure Differences Across the Specimen
E2431 Practice for Determining the Resistance of Single Glazed Annealed Architectural Flat Glass to Thermal Loadings
E2203 Specification for Dense Thermoplastic Elastomers Used for Compression Seals, Gaskets, Setting Blocks, Spacers and Accessories
G15 Terminology Relating to Corrosion and Corrosion Testing
E330 Test Method for Structural Performance of Exterior Windows, Doors, Skylights and Curtain Walls by Uniform Static Air Pressure Difference
E331 Test Method for Water Penetration of Exterior Windows, Skylights, Doors, and Curtain Walls by Uniform Static Air Pressure Difference
E547 Test Method for Water Penetration of Exterior Windows, Skylights, Doors, and Curtain Walls by Cyclic Static Air Pressure Difference
E631 Terminology of Building Constructions
E783 Test Method for Field Measurement of Air Leakage Through Installed Exterior Windows and Doors
16CFR1201 Standard on Architectural Glazing Materials
ANSI/ASCE7, Minimum Design Loads for Buildings and Other Structures
AluminumDesignManual
C1201 Test Method for Structural Performance of Exterior Dimension Stone Cladding Systems by Uniform Static Air Pressure Difference
C99 Test Method for Modulus of Rupture of Dimension Stone
C880 Test Method for Flexural Strength of Dimension Stone
TIR-A11–1996 Maximum Allowable Deflection of Framing Systems for Building Cladding Components at Design Wind Loads
Z97.1 Safety Performance Specifications and Methods of Test for Glazing Materials Used in Buildings
IEEE/ASTMSI10 Standard for Use of the International System of Units (SI): The Modern Metric System