ASTM F825

This specification covers the construction of steel furniture drawers for use where invoked by other marine furniture specifications. Joining shall be adequate to prevent racking during handling. Metal components of drawers, shall be joined by welding or gluing with a structural adhesive. All drawers shall incorporate a latch or other positive means to prevent drawers opening in heavy seas. All drawers shall be furnished with a means for pulling drawers open. Each drawer shall have a pair of drawer tracks with one drawer track on each of its sides. Load test and tilt test shall be performed to conform with the specified requirements. Drawers shall be made to a size that suits the furniture item that supports them.

This abstract is a brief summary of the referenced standard. It is informational only and not an official part of the standard; the full text of the standard itself must be referred to for its use and application. ASTM does not give any warranty express or implied or make any representation that the contents of this abstract are accurate, complete or up to date.

1. Scope

1.1 This specification covers the construction of steel furniture drawers for use where invoked by other marine furniture specifications.

1.2 This specification applies to all furniture drawers, except items requiring progressive drawers.

1.3 Values stated in inch-pound units are to be regarded as the standard. The metric equivalents, given in parentheses, are provided for information only.

2. Referenced Documents

A240/A240M Specification for Heat-Resisting Chromium and Chromium-Nickel Stainless Steel Plate, Sheet, and Strip for Pressure Vessels and for General Applications
A366/A 366M Specification for Commercial Steel (CS) Sheet, Carbon, (0.15 Maximum Percent) Cold-Rolled
A526/A 526M Specification for Steel Sheet, Zinc-Coated (Galvanized) by the Hot-Dip Process, Commercial Quality
D907 Terminology of Adhesives
AISC Wire and Sheet Metal Gages- Equivalent Thickness in Decimals of an Inch, U.S. Standard Gage for Uncoated Hot and Cold Rolled Sheets

Index Terms

drawers; marine furniture; steel furniture drawers; ICS Number Code 47.020.80

Citing ASTM Standards

[Back to Top]