ASTM F467M

This specification covers the requirements for commercial wrought nonferrous nuts in nominal thread diameters M6 to M36 inclusive in a number of alloys in common use and intended for general service applications. Materials shall be tested and shall conform to the chemical composition, hardness, proof stress, proof load, and tensile stress requirements.

This abstract is a brief summary of the referenced standard. It is informational only and not an official part of the standard; the full text of the standard itself must be referred to for its use and application. ASTM does not give any warranty express or implied or make any representation that the contents of this abstract are accurate, complete or up to date.

Significance and Use

For purposes of determining compliance with the specified limits for requirements of the properties listed in this specification, an observed value or calculated value shall be rounded in accordance with Practice E 29.

1. Scope

1.1 This specification covers the requirements for commercial wrought nonferrous nuts in nominal thread diameters M6 to M36 inclusive in a number of alloys in common use and intended for general service applications.

1.2 Applicable bolts, cap screws, and studs for use with nuts covered by this specification are covered by Specification F 468M.

Note 1—This specification is the metric companion of Specification F 467.

2. Referenced Documents

B154 Test Method for Mercurous Nitrate Test for Copper Alloys
B574 Specification for Low-Carbon Nickel-Chromium-Molybdenum, Low-Carbon Nickel-Molybdenum-Chromium-Tantalum, Low-Carbon Nickel-Chromium-Molybdenum-Copper, and Low-Carbon Nickel-Chromium-Molybdenum-Tungsten Alloy Rod
D3951 Practice for Commercial Packaging
E101 Test Method for Spectrographic Analysis of Alu-minum and Aluminum Alloys by the Point-to-Plane Technique
E120 Test Methods for Chemical Analysis of Titanium and Titanium Alloys
E1409 Test Method for Determination of Oxygen and Nitrogen in Titanium and Titanium Alloys by the Inert Gas Fusion Technique
E165 Test Method for Liquid Penetrant Examination
E18 Test Methods for Rockwell Hardness of Metallic Materials
E227 Test Method for Optical Emission Spectrometric Analysis of Aluminum and Aluminum Alloys by the Point-to-Plane Technique
E29 Practice for Using Significant Digits in Test Data to Determine Conformance with Specifications
E34 Test Methods for Chemical Analysis of Aluminum and Aluminum-Base Alloys
E354 Test Methods for Chemical Analysis of High-Temperature, Electrical, Magnetic, and Other Similar Iron, Nickel, and Cobalt Alloys
E38 Methods for Chemical Analysis of Nickel-Chromium and Nickel-Chromium-Iron Alloys
E478 Test Methods for Chemical Analysis of Copper Alloys
E53 Test Method for Determination of Copper in Unalloyed Copper by Gravimetry
E54 Test Methods for Chemical Analysis of Special Brasses and Bronzes
E55 Practice for Sampling Wrought Nonferrous Metals and Alloys for Determination of Chemical Composition
E62 Test Methods for Chemical Analysis of Copper and Copper Alloys (Photometric Methods)
E75 Test Methods for Chemical Analysis of Copper-Nickel and Copper-Nickel-Zinc Alloys
E76 Test Methods for Chemical Analysis of Nickel-Copper Alloys
E92 Test Method for Vickers Hardness of Metallic Materials
F1470 Guide for Fastener Sampling for Specified Mechanical Properties and Performance Inspection
F468M Specification for Nonferrous Bolts, Hex Cap Screws, and Studs for General Use (Metric)
F606M Test Methods for Determining the Mechanical Properties of Externally and Internally Threaded Fasteners, Washers, and Rivets (Metric)
B1.13M Metric Screw Threads
B18.2.4.1M Metric Hex Nuts, Style 1

Index Terms

general use; nonferrous; nut; Fasteners (metal)--specifications; Nickel-copper alloy--specifications; Nickel-copper-aluminum alloys; Nickel-molybdenum alloys--specifications; Nickel-molybdenum-chromium alloys--specifications; Nonferrous bolting materials; Palladium (titanium plus palladium)--specifications; Titanium plus palladium--specifications; Titanium (Ti)/alloys--specifications; UNS N04400 (Ni-Cu alloy, Monel 400); UNS N04405 (Ni-Cu alloy solution strengthened (Monel R405)); UNS N05500 (Ni-Cu alloy, Monel K500); UNS N10001 (Ni-Mo alloy, Hastelloy B); UNS N10002 (Ni-Mo alloy, Hastelloy C); UNS N10665 (Ni-Mo alloy, Hastelloy B-2); UNS R50250 (Ti, unalloyed); UNS R50400 (Ti, unalloyed); UNS R50550 (Ti, unalloyed); UNS R50700 (Ti, unalloyed); ICS Number Code 21.060.20

Citing ASTM Standards

[Back to Top]