ASTM F2202

This specification covers commercial electric slow cook/hold ovens and hot food holding cabinets which are classified by capacity, type (Type I and Type II), style (Style 1, Style 2, and Style 3, each of Class A and Class B), and electrical class (Class 1, Class 2, Class 3, Class 4, Class 5, and Class 6). The cook/hold ovens and hot food holding cabinets shall consist of an oven cavity, sealing type of door(s), heating elements/heating coil, oven racks for physically supporting the steam/sheet pans, and provision to limit condensate/grease drippings on the floor or tabletop surface. The ovens may include a door sensing mechanism, vents, product probe, grease collection pan, and product monitoring system. The physical requirements for doors, heating system, control functions, and accessories are specified. Hardware and fittings as well as threaded parts shall conform to the specified material requirements. The cook/hold ovens and hot food holding cabinets shall pass the performance test.

This abstract is a brief summary of the referenced standard. It is informational only and not an official part of the standard; the full text of the standard itself must be referred to for its use and application. ASTM does not give any warranty express or implied or make any representation that the contents of this abstract are accurate, complete or up to date.

1. Scope

1.1 This specification covers commercial electric slow cook/hold ovens and hot food holding cabinets.

1.2 The values stated in inch-pound units are to be regarded as the standard. The values given in parentheses are for information only.

1.3 The following safety hazards caveat pertains only to the test methods portion, Section 8, of this specification. This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory requirements prior to use.

2. Referenced Documents

D3951 Practice for Commercial Packaging
F1166 Practice for Human Engineering Design for Marine Systems, Equipment, and Facilities
F2140 Test Method for Performance of Hot Food Holding Cabinets
F760 Specification for Food Service Equipment Manuals
MIL-STD-1399/300 Interface Standards for Shipboard Systems Section 300A, Electric Power, Alternating Current
MIL-STD-167/1 Mechanical Vibrations of Shipboard Equipment, Type I-Environmental and Type II-Internally Excited
MIL-STD-461 Military Standard for Electromagnetic Emission and Susceptibility Requirements for the Control of Electromagnetic Interference
ANSI B1.1 Unified Inch Screw Threads (UN and UNR Thread Form)
ANSI/NFPA 70 National Electric Code
ANSI/NSF 4 Commercial Cooking, Rethermalization and Hot Food Holding and Transport Equipment
ANSI/UL No. 197 Standard for Commercial Electric Cooking Appliances

Index Terms

cook and hold oven; foodservice equipment; holding oven; hot food holding cabinet; low temperature cook oven; mobile warmer; oven; roll-in warmer; slow cook oven; warmer; Commercial food service equipment; Cook and hold oven; Cooking/food service equipment--specifications; Holding oven; Hot food holding cabinet; Low-temperature cook oven; Mobile warmer oven; Ovens; Roll-in warmer; Slow cook oven; Warmer ; ICS Number Code 97.040.20

Citing ASTM Standards

[Back to Top]