ASTM E633

This guide presents techniques on the use of thermocouples and associated equipment for measuring temperature in creep and stress-rupture testing in air at temperatures up to 1800°F (1000°C).

Since creep and stress-rupture properties are highly sensitive to temperature, users should make every effort practicable to make accurate temperature measurements and provide stable control of the test temperature. The goal of this guide is to provide users with good pyrometric practice and techniques for precise temperature control for creep and stress-rupture testing.

Techniques are given in this guide for maintaining a stable temperature throughout the period of test.

If the techniques of this guide are followed, the difference between “indicated”³ temperature and “true”⁴ temperature will be reduced to the lowest practical level.

1. Scope

1.1 This guide covers the use of ANSI thermocouple Types K, N, R, and S for creep and stress-rupture testing at temperatures up to 1800°F (1000°C) in air at one atmosphere of pressure. It does not cover the use of sheathed thermocouples.

1.2 The values stated in inch-pound units are to be regarded as the standard. The values given in parentheses are for information only.

1.3This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

2. Referenced Documents

E1129/E1129M Specification for Thermocouple Connectors
E139 Practice for Conducting Creep, Creep-Rupture, and Stress-Rupture Tests of Metallic Materials
E1684 Specification for Miniature Thermocouple Connectors
E207 Test Method of Thermal EMF Test of Single Thermoelement Materials by Comparison with a Secondary Standard of Similar EMF-Temperature Properties
E220 Test Method for Calibration of Thermocouples by Comparison Techniques
E230 Specification and Temperature-Electromotive Force (EMF) Tables for Standardized Thermocouples
E292 Test Methods for Conducting Time-For-Rupture Notch Tension Tests of Materials
E344 Terminology Relating to Thermometry and Hydrometry
E574 Specification for Duplex Base Metal Thermocouple Wire with Glass Fiber or Silica Fiber Insulation

Index Terms

compensation; creep test; instrumentation; insulation; stress-rupture test; temperature; thermocouples; tolerance; ICS Number Code 17.200.20; 17.200.20

Citing ASTM Standards

[Back to Top]