Significance and Use
The NVR obtained by this test method is that amount which is available for release by wipers in normal use.
Evaporation of the solvent at the stated temperature is to quantify the NVR that can be expected to exist at room temperature, since the slight difference between room temperature and test temperature has not been shown to result in significant variances.
Numerous other methods are being used to determine NVR. This test method is not intended to replace test methods used for other applications.
1. Scope
1.1 This test method covers the determination of solvent extractable nonvolatile residue (NVR) from wipers used in assembly, cleaning, or testing of spacecraft, but not from those used for analytical surface sampling of hardware.
1.2 The values stated in SI units are to be regarded as the standard. No other units of measurement are included in this standard.
1.3 The NVR of interest is that which can be extracted from cleanroom wipers using a specified solvent that has been selected for its extractive qualities. Alternative solvents may be selected, but since their use may result in different values being generated, they must be identified in the procedure data sheet.
This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.
2. Referenced Documents
D1193 Specification for Reagent Water
F24 Test Method for Measuring and Counting Particulate Contamination on Surfaces
F50 Practice for Continuous Sizing and Counting of Airborne Particles in Dust-Controlled Areas and Clean Rooms Using Instruments Capable of Detecting Single Sub-Micrometre and Larger Particles
Air Force T.O. 00-25-203 Contamination Control of Aerospace Facilities, U.S. Air Force
MIL-F-51068F Filters, Particulate (High Efficiency, Fire Resistant)
MIL-STD-1916 Acceptance on Zero Sampling Inspection
Fed Spec. O-E-00760 Ethyl Alcohol, Reagent Grade
Fed Spec. O-T-620 1,1,1-Trichloroethane, Technical, Inhibited (Methyl Chloroform)
Fed. Std. 209E Airborne Particulate Classes for Cleanrooms and Clean Zones
ISO/DIS 14644-1 Cleanrooms and Associated Controlled Environments, Classification of air cleanliness
ISO/DIS 14644-2 Cleanrooms and Associated Controlled Environments, Specifications for testing and monitoring to prove continued compliance with ISO 14644-1
Index Terms
cleanroom wipers; non-volatile residue; NVR; wipers; ICS Number Code 49.025.99; 71.040.50
DOI: 10.1520/E1560-06

ASTM International is a member of CrossRef.
Citing ASTM Standards
[Back to Top]