ASTM E1096

This specification provides standard dimensional requirements for glass separatory funnels for general laboratory use. Separatory funnels shall be in the following types: Type 1A; Type 1B; Type 1C; Type 2; Type 3; and Type 4. Separatory funnels shall be made of borosilicate glass conforming to the requirement specified. The design of each separatory funnels shall comply with the dimensions given in each requirements.

This abstract is a brief summary of the referenced standard. It is informational only and not an official part of the standard; the full text of the standard itself must be referred to for its use and application. ASTM does not give any warranty express or implied or make any representation that the contents of this abstract are accurate, complete or up to date.

1. Scope

1.1 This specification provides standard dimensional requirements for glass separatory funnels for general laboratory use.

2. Referenced Documents

E438 Specification for Glasses in Laboratory Apparatus
E671 Specification for Maximum Permissible Thermal Residual Stress in Annealed Glass Laboratory Apparatus
E675 Specification for Interchangeable Taper-Ground Stopcocks And Stoppers
E676 Specification for Interchangeable Taper-Ground Joints
E694 Specification for Laboratory Glass Volumetric Apparatus
E911 Specification for Glass Stopcocks with Polytetrafluoroethylene (PTFE) Plugs

Index Terms

funnels; glass; separatory; ICS Number Code 71.040.20

Citing ASTM Standards

[Back to Top]