1. Scope
1.1 This specification covers seamless round and rectangular including square copper alloy tube in straight lengths. Ten alloys are specified having the following nominal compositions:
| Copper | Previously | Nominal Composition, % |
| Alloy | Used | | | | |
| UNS | Designa- | | | | |
| No. | tionA | Copper | Zinc | Lead | Tin |
| | | | | |
| C22000 | 7 | 90.0 | 10.0 | ... | ... |
| C23000 | 1 | 85.0 | 15.0 | ... | ... |
| C26000 | 2 | 70.0 | 30.0 | ... | ... |
| C27000 | 9 | 65.0 | 35.0 | ... | ... |
| C27200 | 8 | 63.0 | 37.0 | ... | ... |
| C27400 | ... | 62.5 | 37.5 | ... | ... |
| C28000 | 5 | 60.0 | 40.0 | ... | ... |
| C33000 | 3 | 66.0 | 33.5 | 0.5 | ... |
| C33200 | 4 | 66.0 | 32.4 | 1.6 | ... |
| C37000 | 6 | 60.0 | 39.0 | 1.0 | ... |
| C44300 | ... | 71.5 | 27.5 | ... | 1.00 |
A Alloy Designations of Specification B 135 – 63, which was published in the 1966 Book of ASTM Standards, Part 5.
1.2 This specification is the inch-pound companion to Specification B 135M; therefore, no SI equivalents are presented in the specification.
1.3 Warning—Mercury has been designated by EPA and many state agencies as a hazardous material that can cause central nervous system, kidney, and liver damage. Mercury, or its vapor, may be hazardous to health and corrosive to materials. Caution should be taken when handling mercury and mercury-containing products. See the applicable product Material Safety Data Sheet (MSDS) for details and EPA’s website (http://www.epa.gov/mercury/faq.htm) for additional information. Users should be aware that selling mercury or mercury-containing products, or both, in your state may be prohibited by state law. (See 10.1.)
1.4 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.
2. Referenced Documents
B153 Test Method for Expansion (Pin Test) of Copper and Copper-Alloy Pipe and Tubing
B154 Test Method for Mercurous Nitrate Test for Copper Alloys
B251 Specification for General Requirements for Wrought Seamless Copper and Copper-Alloy Tube
B601 Classification for Temper Designations for Copper and Copper Alloys-Wrought and Cast
E243 Practice for Electromagnetic (Eddy-Current) Examination of Copper and Copper-Alloy Tubes
E527 Practice for Numbering Metals and Alloys in the Unified Numbering System (UNS)
Index Terms
brass tube; seamless brass tube; seamless tube; Brass pipe/tube--specifications; Seamless Cu/Cu alloy tube--specifications; UNS C22000--tube (seamless/welded); UNS C23000--pipe/tube (seamless/welded); UNS C26000--tube; UNS C27000 (yellow brass, 65%); UNS C27200 (brass); UNS C27400 (yellow brass, 63 %); UNS C28000 (Muntz metal, 60 %); UNS C33000 (low leaded brass); UNS C33200 (high leaded brass); UNS C37000 (free-cutting Muntz metal); UNS C44300 (admiralty, arsenical); Yellow brass; ICS Number Code 23.040.15
Citing ASTM Standards
[Back to Top]
