UOP9-85

    Historical Standard: UOP9-85 Hydrogen Sulfide in Gases by the Tutwiler Method

    SUPERSEDED


    Buy Standard (PDF)
    4 pages
    $240.00


    1. Scope

    This method is for determining hydrogen sulfide in gas mixtures. Mercaptan sulfur and carbonyl sulfide, if present, are determined as hydrogen sulfide. The accuracy of this method is not sufficient to obtain reliable results below 5 grains of H2S per 100 cu ft (115 mg/m3). This method is intended primarily as a field test. UOP Method 212, "Hydrogen Sulfide, Mercaptan Sulfur and Carbonyl Sulfide in Hydrocarbon Gases by Potentiometric Titration" is recommended for more accurate laboratory determinations.


    Citing ASTM Standards
    Back to Top