Standard Historical Last Updated: Nov 28, 2012 Track Document
ASTM G177-03(2008)e1

Standard Tables for Reference Solar Ultraviolet Spectral Distributions: Hemispherical on 37° Tilted Surface

Standard Tables for Reference Solar Ultraviolet Spectral Distributions: Hemispherical on 37° Tilted Surface G0177-03R08E01 ASTM|G0177-03R08E01|en-US Standard Tables for Reference Solar Ultraviolet Spectral Distributions: Hemispherical on 37° Tilted Surface Standard new BOS Vol. 14.04 Committee G03
$ 75.00 In stock

Significance and Use

This standard does not purport to address the mean level of solar ultraviolet spectral irradiance to which materials will be subjected during their useful life. The spectral irradiance distributions have been chosen to represent a reasonable upper limit for natural solar ultraviolet radiation that ought to be considered when evaluating the behavior of materials under various exposure conditions.

Absorptance, reflectance, and transmittance of solar energy are important factors in material degradation studies. These properties are normally functions of wavelength, which require that the spectral distribution of the solar flux be known before the solar-weighted property can be calculated.

The interpretation of the behavior of materials exposed to either natural solar radiation or ultraviolet radiation from artificial light sources requires an understanding of the spectral energy distribution employed. To compare the relative performance of competitive products, or to compare the performance of products before and after being subjected to weathering or other exposure conditions, a reference standard solar spectral distribution is desirable.

A plot of the SMARTS2 model output for the reference hemispherical UV radiation on a 37° south facing tilted surface is shown in Fig. 1. The input needed by SMARTS2 to generate the spectrum for the prescribed conditions are shown in Table 2.

SMARTS2 Version 2.9.2 is required to generate AM 1.05 UV reference spectra.

The availability of the adjunct standard computer software (ADJG0173CD ) for SMARTS2 allows one to (1) reproduce the reference spectra, using the above input parameters; (2) compute test spectra to attempt to match measured data at a specified FWHM, and evaluate atmospheric conditions; and (3) compute test spectra representing specific conditions for analysis vis-à-vis any one or all of the reference spectra.

Scope

1.1 The table provides a standard ultraviolet spectral irradiance distribution that maybe employed as a guide against which manufactured ultraviolet light sources may be judged when applied to indoor exposure testing. The table provides a reference for comparison with natural sunlight ultraviolet spectral data. The ultraviolet reference spectral irradiance is providded for the wavelength range from 280 to 400 nm. The wavelength region selected is comprised of the UV-A spectral region from 320 to 400 nm and the UV-B region from 280 to 320 nm.

1.2 The table defines a single ultraviolet solar spectral irradiance distribution:

1.2.1 Total hemispherical ultraviolet solar spectral irradiance (consisting of combined direct and diffuse components) incident on a sun-facing, 37° tilted surface in the wavelength region from 280 to 400 nm for air mass 1.05, at an elevation of 2 km (2000 m) above sea level for the United States Standard Atmosphere profile for 1976 (USSA 1976), excepting for the ozone content which is specified as 0.30 atmosphere-centimeters (atm-cm) equivalent thichkness.

1.3 The data contained in these tables were generated using the SMARTS2 Version 2.9.2 atmospheric transmission model developed by Gueymard (1,2).

1.4 The climatic, atmospheric and geometric parameters selected reflect the conditions to provide a realistic maximum ultraviolet exposure under representative clear sky conditions.

1.5 The availability of the SMARTS2 model (as an adjunct (ADJG0173CD )to this standard) used to generate the standard spectra allows users to evaluate spectral differences relative to the spectra specified here.

Price:
Contact Sales
Related
Reprints and Permissions
Reprints and copyright permissions can be requested through the
Copyright Clearance Center
Details
Book of Standards Volume: 14.04
Developed by Subcommittee: G03.09
Pages: 9
DOI: 10.1520/G0177-03R08E01
ICS Code: 17.180.20