ASTM F846-92(2003)

1. Scope

1.1 This guide covers the basic tests which shall be conducted on amusement rides and devices during prototype development, installation or erection, following major modifications, and during normal operation to determine that the performance of a given ride or device meets the manufacturer's specified design criteria.

Note 1—The following standards developed by Committee F24 contain information relative to this guide: Specification F 698, Practices E 1212, F 1193, and F 770, Terminology E 1316, and Definitions F 747.

1.2 This standard does not purport to address all of the safety problems, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

2. Referenced Documents (purchase separately) The documents listed below are referenced within the subject standard but are not provided as part of the standard.

ASTM Standards

E543 Specification for Agencies Performing Nondestructive Testing

E1212 Practice for Quality Management Systems for Nondestructive Testing Agencies

E1316 Terminology for Nondestructive Examinations

F698 Specification for Physical Information to be Provided for Amusement Rides and Devices

F747 Terminology Relating to Amusement Rides and Devices

F770 Practice for Ownership, Operation, Maintenance, and Inspection of Amusement Rides and Devices

F853 Practice for Maintenance Procedures for Amusement Rides and Devices

F1193 Practice for Quality, Manufacture, and Construction of Amusement Rides and Devices

ASNT Document

ICS Code

ICS Number Code 97.200.99 (Other equipment for entertainment)

DOI: 10.1520/F0846-92R03

ASTM International is a member of CrossRef.

Citing ASTM Standards

[Back to Top]