Standard Historical Last Updated: May 14, 2012 Track Document
ASTM F468M-06e1

Standard Specification for Nonferrous Bolts, Hex Cap Screws, and Studs for General Use [Metric]

Standard Specification for Nonferrous Bolts, Hex Cap Screws, and Studs for General Use [Metric] F0468M-06E01 ASTM|F0468M-06E01|en-US Standard Specification for Nonferrous Bolts, Hex Cap Screws, and Studs for General Use [Metric] Standard new BOS Vol. 01.09 Committee F16
$ 83.00 In stock

Significance and Use

For purposes of determining compliance with the specified limits for requirements of the properties listed in this specification, an observed value or calculated value shall be rounded in accordance with Practice E 29.

Abstract

This specification covers the requirements for commercial wrought nonferrous bolts, hex cap screws, and studs manufactured from a number of alloys in common use and intended for general service applications. The bolts, cap screws, and studs shall be manufactured from material having a chemical composition conforming to the requirements specified. The fasteners shall be cold formed, hot formed, or machined from suitable material. Different tests shall be conducted in order to determine the following mechanical properties of fasteners: hardness, tensile strength, yield strength, and elongation.

Scope

1.1 This specification covers the requirements for commercial wrought nonferrous bolts, hex cap screws, and studs in nominal thread diameters M6 to M36 inclusive manufactured from a number of alloys in common use and intended for general service applications.

1.2 Unless otherwise specified, nuts used on these bolts, cap screws, and studs shall conform to the requirements of Specification F 467M. Nuts shall be of the same alloy group as the fastener on which they are used and shall have a specified minimum proof stress equal to or greater than the specified minimum tensile strength stress of the fastener on which they are used.

Note 1—This specification is the metric companion of Specification F 468.

Price:
Contact Sales
Related
Reprints and Permissions
Reprints and copyright permissions can be requested through the
Copyright Clearance Center
Details
Book of Standards Volume: 01.09
Developed by Subcommittee: F16.04
Pages: 11
DOI: 10.1520/F0468M-06E01
ICS Code: 21.060.10