Standard Historical Last Updated: Dec 31, 2010 Track Document
ASTM F1507-99(2006)

Standard Specification for Surge Suppressors for Shipboard Use

Standard Specification for Surge Suppressors for Shipboard Use F1507-99R06 ASTM|F1507-99R06|en-US Standard Specification for Surge Suppressors for Shipboard Use Standard new BOS Vol. 01.07 Committee F25
$ 75.00 In stock

Abstract

This specification establishes the performance requirements for surge suppressors used on shipboard ac power circuits that may consist of a single circuit element or may be a hybrid device using several suppression devices. The surge suppressor shall be a protective device for limiting voltage transients on equipment by discharging, dissipating internally, bypassing surge current, or a combination thereof, and which prevents continued flow of follow current to ground and is capable of repeating these functions. Surge suppressors shall be classified into the following classes and types: Class Asurge suppressor associated with long circuit branch; Class Bsurge suppressor for short branch circuit; and Type Ipermanent connected type; Type IIplug-in type; Type IIIcord-connected type; and Type IVpower director (power center) type. The surge suppressors shall conform to specified performance, operating, grounding, and supplementary protection requirements. They shall also undergo designated design, and conformance production tests such as insulation withstand test, power frequency withstand test, impulse voltage-time tests (including fast-front impulse suppression tests and slow-front impulse suppression tests), voltage protection level tests, duty cycle tests, life cycle tests (including voltage and current impulses), load current and voltage drop tests (including rated current and voltage drop and inrush current), and ground continuity test.

Scope

1.1 This standard establishes performance requirements of surge suppressors for use on shipboard ac power circuits.

1.2 Surge suppressor shall be a protective device for limiting voltage transients on equipment by discharging, dissipating internally, bypassing surge current, or a combination thereof; and which prevents continued flow of follow current to ground and is capable of repeating these functions.

1.3 Surge suppressors covered by this specification may consist of a single circuit element, or may be a hybrid device employing several suppression devices.

Price:
Contact Sales
Related
Reprints and Permissions
Reprints and copyright permissions can be requested through the
Copyright Clearance Center
Details
Book of Standards Volume: 01.07
Developed by Subcommittee: F25.10
Pages: 9
DOI: 10.1520/F1507-99R06
ICS Code: 29.120.50