Standard Historical Last Updated: Nov 28, 2012 Track Document
ASTM E675-02(2007)

Standard Specification for Interchangeable Taper-Ground Stopcocks And Stoppers

Standard Specification for Interchangeable Taper-Ground Stopcocks And Stoppers E0675-02R07 ASTM|E0675-02R07|en-US Standard Specification for Interchangeable Taper-Ground Stopcocks And Stoppers Standard new BOS Vol. 14.04 Committee E41
$ 83.00 In stock

Abstract

The specification provides the standard dimensional requirements for obtaining, within practical limits, interchangeability in stopcocks and stoppers for ordinary laboratory and industrial applications. It solely covers ground surfaces dimensional interchangeability, and does not involve design characteristics of the item except where specified. Materials shall be tested and shall conform to the specified values of design, dimension, designation, tolerances, taper, and master gages; as stated in the requirements for Single Straight-Bore Taper-Ground Stopcocks, Single Oblique-Bore Stopcocks, Double Oblique-Bore (Three-Way) Stopcocks, T-Bore and 120-deg Bore Stopcocks, Taper-Ground Flask Stoppers, and Taper-Ground Bottle Stoppers.

Scope

1.1 The specification provides standard dimensional requirements for obtaining, within practical limits, interchangeability in stopcocks and stoppers for ordinary laboratory and industrial applications. It covers dimensional interchangeability of the ground surfaces only and does not involve design characteristics of the item except where specified.

Note 1—The dimensions pertaining to stopcocks and stoppers were taken from the Commercial Standard CS 21 of the U.S. Department of Commerce.

Note 2—Although glass is the most commonly used material for stopcocks and stoppers, other materials may be used as specified. Stopcocks and stoppers constructed from glass should conform to Specifications E 438 and E 671.

Price:
Contact Sales
Related
Reprints and Permissions
Reprints and copyright permissions can be requested through the
Copyright Clearance Center
Details
Book of Standards Volume: 14.04
Developed by Subcommittee: E41.01
Pages: 11
DOI: 10.1520/E0675-02R07
ICS Code: 71.040.20