Standard Historical
Active: ASTM E1193-20
Last Updated: Dec 26, 2012 Track Document
ASTM E1193-97(2004)

Standard Guide for Conducting Daphnia magna Life-Cycle Toxicity Tests

Standard Guide for Conducting Daphnia magna Life-Cycle Toxicity Tests E1193-97R04 ASTM|E1193-97R04|en-US Standard Guide for Conducting Daphnia magna Life-Cycle Toxicity Tests Standard new BOS Vol. 11.06 Committee E47
$ 83.00 In stock

Scope

1.1 This guide covers procedures for obtaining laboratory data concerning the adverse effects of a test material (added to dilution water, but not to food) on Daphnia magna Straus, 1820, during continuous exposure throughout a life-cycle using the renewal or flow-through techniques. These procedures also should be useful for conducting life-cycle toxicity tests with other invertebrate species, although modifications might be necessary.

1.2 These procedures are applicable to most chemicals, either individually or in formulations, commercial products, or known mixtures. With appropriate modifications, these procedures can be used to conduct tests on temperature, dissolved oxygen, pH, and on such materials as aqueous effluents (also see Guide E 1192), leachates, oils, particulate matter, sediments, and surface waters. The technique, (renewal or flow-through), will be selected based on the chemical characteristics of the test material such as high oxygen demand, volatility, susceptibility to transformation (biologically or chemically), or sorption to glass.

1.3 Modification of these procedures might be justified by special needs or circumstances. Although using appropriate procedures is more important than following prescribed procedures, results of tests conducted using unusual procedures are not likely to be comparable to results of standard test procedures. Comparison of results obtained using modified and unmodified versions of these procedures might provide useful information on new concepts and procedures for conducting life-cycle toxicity tests with D. magna.

1.4 This guide is arranged as follows:

SectionReferenced DocumentsTerminologySummary of GuideSignificance and UseApparatusFacilitiesConstruction MaterialsTest ChambersCleaningAcceptabilityReagentsPurity of ReagentsHazardsDilution WaterRequirementsSourceTreatmentCharacterizationTest MaterialGeneralStock SolutionsTest Concentrations(s)Test OrganismsSpeciesAgeSourceBrood StockFoodHandlingHarvesting YoungQualityProcedureExperimental DesignDissolved OxygenTemperatureLoadingSelection of Test SystemBeginning the TestCare and MaintenanceFeedingDurationBiological DataOther MeasurementsAnalytical MethodologyAcceptability of TestCalculation of ResultsReportKeywordsAppendixesStatistical GuidanceFood

1.5 The values stated in SI units are to be regarded as the standard.The values given in parentheses are for information only.;

1.6 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use. Specific hazard statements are given in Section 8.

Price:
Contact Sales
Related
Reprints and Permissions
Reprints and copyright permissions can be requested through the
Copyright Clearance Center
Details
Book of Standards Volume: 11.06
Developed by Subcommittee: E47.01
Pages: 19
DOI: 10.1520/E1193-97R04
ICS Code: 07.100.20; 13.020.30