Standard Historical Last Updated: Dec 31, 2010 Track Document
ASTM D714-02e1

Standard Test Method for Evaluating Degree of Blistering of Paints

Standard Test Method for Evaluating Degree of Blistering of Paints D0714-02E01 ASTM|D0714-02E01|en-US Standard Test Method for Evaluating Degree of Blistering of Paints Standard new BOS Vol. 06.01 Committee D01
$ 75.00 In stock

Significance and Use

A phenomenon peculiar to painted surfaces is the formation of blisters relative to some system weakness. This test method provides a standard procedure of describing the size and density of the blisters so that comparisons of severity can be made.

Scope

1.1 This test method employs photographic reference standards to evaluate the degree of blistering that may develop when paint systems are subjected to conditions which will cause blistering. While primarily intended for use on metal and other nonporous surfaces, this test method may be used to evaluate blisters on porous surfaces, such as wood, if the size of blisters falls within the scope of these reference standards. When the reference standards are used as a specification of performance, the permissible degree of blistering of the paint system shall be agreed upon by the purchaser and the seller.

1.2 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

Price:
Contact Sales
Related
Reprints and Permissions
Reprints and copyright permissions can be requested through the
Copyright Clearance Center
Details
Book of Standards Volume: 06.01
Developed by Subcommittee: D01.25
Pages: 6
DOI: 10.1520/D0714-02E01
ICS Code: 87.040