Standard Historical Last Updated: Nov 05, 2015 Track Document
ASTM D7082-04(2010)

Standard Specification for Polyethylene Stay In Place Form System for End Walls for Drainage Pipe

Standard Specification for Polyethylene Stay In Place Form System for End Walls for Drainage Pipe D7082-04R10 ASTM|D7082-04R10|en-US Standard Specification for Polyethylene Stay In Place Form System for End Walls for Drainage Pipe Standard new BOS Vol. 08.03 Committee D20
$ 66.00 In stock

Abstract

This specification addresses the requirements for polyethylene stay in place forms for end walls or head walls for use with standard storm drainage systems. The wall form system consists of a base wall form, a cap, an optional riser to adjust the height of the wall above the pipe, and an optional adaptor to adjust the pipe opening to accommodate smaller pipe sizes. The form system is manufactured using the rotational molding process and is available in different colors. The plastic shall be tested for its deflection temperature, flexural properties, melt flow rate, and density.

Scope

1.1 This specification addresses the requirements for polyethylene stay in place forms for end walls or head walls for use with standard storm drainage systems.

1.2 The wall form system consists of a base wall form, a cap, an optional riser to adjust the height of the wall above the pipe, and an optional adaptor to adjust the pipe opening to accommodate smaller pipe sizes.

1.3 The form system is manufactured using the rotational molding process and is available in different colors.

1.4 The values stated in SI units are to be regarded as the standard, the inch-pounds in brackets are given for information only.

1.5 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory requirements prior to use.

Note 1—There is no known ISO equivalent to this standard.

Price:
Contact Sales
Related
Reprints and Permissions
Reprints and copyright permissions can be requested through the
Copyright Clearance Center
Details
Book of Standards Volume: 08.03
Developed by Subcommittee: D20.24
Pages: 4
DOI: 10.1520/D7082-04R10
ICS Code: 93.030