Standard Historical Last Updated: Dec 31, 2010 Track Document
ASTM D4316-95(2005)

Standard Specification for Elastomeric Water Bottles

Standard Specification for Elastomeric Water Bottles D4316-95R05 ASTM|D4316-95R05|en-US Standard Specification for Elastomeric Water Bottles Standard new BOS Vol. 09.02 Committee D11
$ 66.00 In stock

Abstract

This specification covers requirements for molded, non-fabric reinforced, elastomeric water bottles with closure and screw stopper, generally used with hot or cold water in personal hygiene and health care. Bottles to be used shall be manufactured from an elastomeric compound that has the following physical properties determined: tensile strength, ultimate elongation, resistance to heating at a certain temperature and resistance to water also at a certain degree. Aside from that, the stopper of the bottles shall also be manufactured from a noncorrosive metal or polymeric material. The bottle and stopper shall not be toxic, sensitizing, locally irritating, or otherwise harmful under normal conditions of use. The construction shall consist of an integral body and closure designed for use with hot or cold water.

Scope

1.1 This specification covers requirements for molded, non-fabric reinforced, elastomeric water bottles with closure and screw stopper, generally used with hot or cold water in personal hygiene and health care.

1.2 The safe and proper use of elastomeric water bottles is beyond the scope of this specification except for the user instructions in 9.2.

Price:
Contact Sales
Related
Reprints and Permissions
Reprints and copyright permissions can be requested through the
Copyright Clearance Center
Details
Book of Standards Volume: 09.02
Developed by Subcommittee: D11.40
Pages: 2
DOI: 10.1520/D4316-95R05
ICS Code: 55.100