1. Scope
1.1 This specification covers concrete drain tile with internal diameters from 100 to 900 mm, that are intended to be used for surface and subsurface drainage.
1.2 This specification is the metric counterpart of Specification C412.
Note 1-This specification is a manufacturing and purchase specification only and does not include requirements for bedding, backfill, or the relationship between field load condition and the strength classification of drain tile. However, experience has shown that the successful performance of the product depends upon the proper selection of the class of drain tile, type of bedding and backfill, and care that the installation conforms to the construction specifications. The owner is cautioned that he must correlate the field requirements with the class of drain tile specified and provide for or require inspection at the construction site.
2. Referenced Documents
ASTM Standards
C1116 Specification for Fiber-Reinforced Concrete and Shotcrete
C150 Specification for Portland Cement
C33 Specification for Concrete Aggregates
C497M Test Methods for Testing Concrete Pipe, Manhole Sections, or Tile [Metric]
C595 Specification for Blended Hydraulic Cements
C618 Specification for Coal Fly Ash and Raw or Calcined Natural Pozzolan for Use in Concrete
C822 Terminology Relating to Concrete Pipe and Related Products
C989 Specification for Ground Granulated Blast-Furnace Slag for Use in Concrete and Mortars
Index Terms
Concrete; concrete drain tile, spec., (for metric see C 412M); Number Code 23.040.50 (Pipes and fittings of other materials)
DOI: 10.1520/C0412M-99
ASTM International is a member of CrossRef.
Citing ASTM Standards
[Back to Top]
