Standard Historical Last Updated: Dec 31, 2010 Track Document
ASTM C1220-98(2004)

Standard Test Method for Static Leaching of Monolithic Waste Forms for Disposal of Radioactive Waste

Standard Test Method for Static Leaching of Monolithic Waste Forms for Disposal of Radioactive Waste C1220-98R04 ASTM|C1220-98R04|en-US Standard Test Method for Static Leaching of Monolithic Waste Forms for Disposal of Radioactive Waste Standard new BOS Vol. 12.01 Committee C26
$ 83.00 In stock

Scope

1.1 This test method covers the relative chemical durability of simulated and radioactive monolithic waste forms, such as glasses, ceramics, or cermets, in various test solutions at temperatures <100°C under low surface-area-to-volume (S/V) ratio conditions.

1.2 This test method can be used to distinguish differences in the leaching behavior of various simulated or radioactive waste forms under the specific conditions of the test based on analysis of the test solution. Data from this test are used to calculate the normalized elemental mass loss from specimens exposed to aqueous solutions at temperatures <100°C.

1.3 Specimen surfaces may be altered during this test. These altered surfaces may be used to study the reaction of monolithic waste forms during static exposure to solutions.

1.4 This test method must be performed in accordance with all applicable quality assurance requirements for acceptance of the data.

1.5 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use. For a specific hazard statement, see 7.3.2.

Price:
Contact Sales
Related
Reprints and Permissions
Reprints and copyright permissions can be requested through the
Copyright Clearance Center
Details
Book of Standards Volume: 12.01
Developed by Subcommittee: C26.07
Pages: 16
DOI: 10.1520/C1220-98R04
ICS Code: 13.280; 27.120.30