| ||Format||Pages||Price|| |
|4||$44.40||  ADD TO CART|
1.1 These test methods cover procedures for testing rigid electrical insulation normally manufactured in flat sheet or plate form. They are generally used as terminal boards, spacers, voltage barriers, and circuit boards.
Note 1—For tests applying to vulcanized fiber reference should be made to Test Methods D 619.Note 2—This standard resembles IEC 60893-2, Specification for Rigid Industrial Laminated Sheets Based On Thermosetting Resins for Electrical Purpose, Methods of Tests.<>
1.2 The test methods appear in the following sections:
|Test||Sections||ASTM Test Method|
|Acetone extractable matter||83 to 84||D 494|
|Arc resistance||47||D 495|
|Ash||56 to 60||...|
|Bonding strength||49 to 54||...|
|Burning rate and flame resistance||61 to 75||...|
|Compressive strength||25||D 695|
|Dissipation factor||34 to 40||D 669|
|Dielectric strength||28 to 33||D 149|
|Expansion (linear thermal)||76||D 696|
|Flexural properties||12 to 24||D 790|
|Hardness (Rockwell)||55||D 785|
|Insulation resistance and resistivity||41 to 46||D 257|
|Permittivity||34 to 40||D 150|
|Resistance to impact||26||D 256|
|Tensile properties||7 to 11||D 638|
|Thickness||5 to 6||D 374|
|Tracking resistance||48||D 2132|
|Warp or twist||77 to 82||...|
|Water absorption||27||D 570|
1.3 The values stated in inch-pound units are to be regarded as the standard. The metric equivalents of inch-pound units given in these test methods may be approximate.
1.4 This is a fire-test-response standard. See Sections 61 through 75, which are the procedures for burning rate and flame resistance.
1.5 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use. Specific precautionary statements are given in 31.1 and 61.5.
2. Referenced Documents (purchase separately) The documents listed below are referenced within the subject standard but are not provided as part of the standard.
C698 Test Methods for Chemical, Mass Spectrometric, and Spectrochemical Analysis of Nuclear-Grade Mixed Oxides ((U, Pu)O2)
C753 Specification for Nuclear-Grade, Sinterable Uranium Dioxide Powder
C757 Specification for Nuclear-Grade Plutonium Dioxide Powder, Sinterable
C859 Terminology Relating to Nuclear Materials
C1165 Test Method for Determining Plutonium by Controlled-Potential Coulometry in H2SO4 at a Platinum Working Electrode
C1204 Test Method for Uranium in Presence of Plutonium by Iron(II) Reduction in Phosphoric Acid Followed by Chromium(VI) Titration
C1206 Test Method for Plutonium by Iron (II)/Chromium (VI) Amperometric Titration
E105 Practice for Probability Sampling of Materials
ANSI StandardANSI/ASMENQA-1 Quality Assurance Program Requirements for Nuclear Facility Applications
U.S. Government DocumentsU.S.NuclearRegulator Packaging and Transportation of Radioactive Material
ICS Number Code 27.120.30 (Fissile materials and nuclear fuel technology)
UNSPSC Code 15131500(Nuclear fuel)