SUPERSEDED (see Active link, below)
Active (view current version of standard)
1.1 This specification covers zinc and zinc alloy wire used in depositing zinc and zinc alloy coatings by thermal spraying (metallizing). Zinc and zinc alloy wire provided under this specification is intended for use in oxy-fuel and electric arc thermal spraying for the corrosion protection of iron and steel.
1.2 Zinc alloy wire compositions used in thermal spraying primarily for electronic applications are found in Specification B 943.
1.3 Zinc alloy wire compositions used as solders are found in Specification B 907.
1.4 The values stated in SI units are to be regarded as the standard. The values in parentheses are for information only.
This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to become familiar with all hazards including those identified in the appropriate Material Safety Data Sheet (MSDS) for this product/material as provided by the manufacturer, to establish appropriate safety and health practices, and determine the applicability of regulatory limitations prior to use.
2. Referenced Documents (purchase separately) The documents listed below are referenced within the subject standard but are not provided as part of the standard.
B6 Specification for Zinc
B899 Terminology Relating to Non-ferrous Metals and Alloys
B907 Specification for Zinc, Tin and Cadmium Base Alloys Used as Solders
B943 Specification for Zinc and Tin Alloy Wire Used in Thermal Spraying for Electronic Applications
E29 Practice for Using Significant Digits in Test Data to Determine Conformance with Specifications
E527 Practice for Numbering Metals and Alloys in the Unified Numbering System (UNS)
E536 Test Methods for Chemical Analysis of Zinc and Zinc Alloys
ANSI/AWS StandardANSI/AWS A5.33 Specification for Solid and Ceramic Wires and Ceramic Rods for Thermal Spraying
ISO StandardsISO 3815-1 Zinc and zinc alloys -- Part 1: Analysis of solid samples by optical emission spectrometry ISO 3815-2 Zinc and zinc alloys -- Part 2: Analysis by inductively coupled plasma optical emission spectrometry
ICS Number Code 25.220.20 (Surface treatment)
UNSPSC Code 11101704(Steel)